Giulia Pascuzzi – Coach & Business Leader – Parlare di diversità è davvero in...
ICR SPRINT S20 ALU PUTTY - Stucco alluminio fine / Fine aluminium filler
1. Stucco contenente polvere di alluminio
che conferisce adesione, durezza,
resistenza all’acqua, carburanti e lubrificanti.
Ha buone capacità anticorrosive.
Viene utilizzato principalmente su fusioni, per la
protezione di lamierati e per stuccature a vista.
Il VOC del prodotto pronto all’uso misurato secondo ISO
11890 risulta inferiore ai 250 g/l , limite di categoria
dettato dalla Normativa Europea 2004/42.
Two-component filler containing high percentage
of aluminium powder, which allows to obtain adhesion,
hardness, resistance to water, fuels and lubricants.
It has good anti-corrosive properties.
It is mainly utilized to recover flaws of fusion, to restore
and protect metal sheets, for filling imperfections
on zinc-plated materials.
Voc < 250 g/l according 2004/42CE.
S20 ALU PUTTY.
FINE ALUMINIUM FILLER.S20 ALU PUTTY.
STUCCO ALLUMINIO FINE.
www.icrsprint.com
2. A) DESCRIPTION AND FIELDS OF APPLICATION:
Two-component filler containing high percentage of aluminium powder,
which allows to obtain adhesion, hardness, resistance to water, fuels
and lubricants. It has good anti-corrosive properties. It is mainly utili-
zed to recover flaws of fusion, to restore and protect metal sheets, for
filling imperfections on zinc-plated materials. Voc < 250 g/l according
2004/42CE.
B) TECHNICAL DATA:
Composition: Unsaturated polyester resin and aluminium powder
in different grain sizes
Specific weight: 1,80 ± 0,1 kg/l
Available colours: Aluminium
Safety data: See safety data sheet
C) SURFACE PREPARATION:
• Zinc-plated sheet, aluminium and its alloys, iron, steel plate, plastics
• Original paints or aged topcoat finishes
• Clean well the surface to be treated with V09 Antisil.
Make sure it is dry and free from silicone, wax, grease and
any extraneous material
• On base coats or enamel top coats, sand and clean the
surface before applying the filler
D) CAUTIONS:
> Mix well the filler with 1-3 % paste hardener. Do not exceed with the
hardener to avoid risk of staining during painting operations.
> Do not utilize the product at temperatures below 5°C.
> Store in a cool and dry place.
E) PROCESSING:
1-3% C10 paste hardener pot -life 3-6’ at 20°C
application with putty knife
< 30’ at 20° C
4-5’ at 1 m
P40-P80 roughing-out
F) TOOLS CLEANING:
> With nitro thinner.
G) RECOATING:
S40 Standard grey putty
S48 Special red putty
S71 Flex grey putty
S27 Light putty
S49 Universal ZN putty
S98 Universal white putty
Technical indications and advices are based on our own experiences.
We assure the perfect quality of products. However, being the utilization out of our
control, we assume no responsibility on the results obtained.
A) DESCRIZIONE E CAMPO D’IMPIEGO:
Stucco contenente polvere di alluminio che conferisce adesione,
durezza, resistenza all’acqua, carburanti e lubrificanti. Ha buone capacità
anticorrosive. Viene utilizzato principalmente su fusioni, per la protezione
di lamierati e per stuccature a vista.Il VOC del prodotto pronto all’uso
misurato secondo ISO 11890 risulta inferiore ai 250 g/l , limite
di categoria dettato dalla Normativa Europea 2004/42.
B) NOTE TECNICHE:
Composizione: Resine poliestere insature e polvere di alluminio
Peso specifico: 1.8 ± 0,1
Colori disponibili: Alluminio
Dati di sicurezza: Fare riferimento alla scheda di sicurezza
C) PREPARAZIONE DEL SUPPORTO:
• Lamiera zincata, alluminio e sue leghe, ferro,
lamiera d’acciaio, plastiche
• Vernici Originali o vecchie verniciature ben consolidate
• Pulire bene la superficie da trattare con Antisil V09 e
assicurarsi che sia asciutta e priva di silicone, cere, grassi
e sostanze estranee in genere
• Su fondi o smalti carteggiare e pulire la superficie prima
di stuccare
D) AVVERTENZE:
> Miscelare accuratamente lo stucco con il 1-3% di induritore in pasta.
Evitare l’uso di una dose eccessiva di induritore perchè potrebbero
generarsi macchie di perossido in fase di verniciatura.
> Non utilizzare il prodotto a temperature inferiori a 5°C.
> Conservare in luogo fresco ed asciutto.
E) LAVORAZIONE CON CARTEGGIATURA:
1-3% induritore in pasta potlife 3-6’ a 20° C
applicazione a spatola
< 30’ a 20° C
4-5’ a 1 mt
P40-P80 sgrossatura
F) PULIZIA DEGLI ATTREZZI:
> Con diluente nitro o da lavaggio.
G) PROSECUZIONE DELLA LAVORAZIONE:
Stucco Standard S40
Stucco Flessibile S48
Stucco Flessibile S71
Stucco Leggero S27
Stucco Universale S49
Stucco Universale Leggero Bianco S98
Le informazioni tecniche ed i suggerimenti sono conformi a quanto risulta dalle nostre esperienze.
Noi assicuriamo la perfetta qualità del prodotto. Tuttavia, non essendo le condizioni di
utilizzo sotto il nostro controllo, non assumiamo nessuna responsabilità sui risultati ottenuti.
IT SCHEDA TECNICA S20
ALU PUTTY
Stucco alluminio fine
ALU PUTTY
Fine aluminium filler
EN TECHNICAL SHEET S20
I.C.R. S.p.A. ITALIA - Reggio Emilia Tel. + 39/0522.517803 – Fax + 39/0522.514384 E-mail: info@icrsprint.it – www.icrsprint.com |
ICR SPRINT COATING UK LTD UK - London - T: 01278802011 E-mail: enquiries@icrsprint.co.uk www.icrsprint.com |
ICR SPRINT INC USA - Fall River - MA - T: 800 980 4071 E-mail: icrsprintusa@gmail.com www.icrsprint.com |
ICR Ibérica, S.A. SPAIN - Tel. +34/901 101 408 E-mail: info@icriberica.com www.icriberica.com