1.
11/1/22, 11:32 AM MSD
https://www3.miele.de/irj/portal/ 1/3
Technical data – PW 418
1: Table [ | | ]
Heating type Electric Without heating
Capacity
Fill ratio 1:9 [lbs (kg)] 44 (20) 44 (20)
Fill ratio 1:10 [lbs (kg)] 40 (18) 40 (18)
Packaging dimensions
Width – Normal/marine
[inches
(mm)]
44.5 (1130/-) 44.5 (1130/-)
Depth – Normal/marine
[inches
(mm)]
42.9 (1090/-) 42.9 (1090/-)
Height – Normal/marine
[inches
(mm)]
61.8 (1568/-) 61.8 (1568/-)
Gross weight – Normal/marine [lbs (kg)] 882-966 (401–439) 882-961 (401–437)
Net weight [lbs (kg)] 825-906 (375–412) 823-902 (374–410)
Overall machine dimensions
Width
[inches
(mm)]
36.4 (924) 36.4 (924)
Depth
[inches
(mm)]
37.4 (950) 37.4 (950)
Height
[inches
(mm)]
57.2 (1452) 57.2 (1452)
Casing dimensions
Width
[inches
(mm)]
36.2 (920) 36.2 (920)
Depth
[inches
(mm)]
33.8 (857) 33.8 (857)
Height
[inches
(mm)]
57.1 (1450) 57.1 (1450)
Max. floor load in operation
Force [N] 5,615–5,978 5,605–5,958
Total rated load (EL)
3 N AC 380–415 V 50/60 Hz [kW] 18 3
3 AC 200–208/220–240 V 60 Hz [kW] 11.9–13.6/10.4–11.0 3
3 AC 230 V 50/60 Hz [kW] 18 -
Heater rating
3 N AC 380–415 V 50/60 Hz [kW] 15 -
3 AC 200–208/220–240 V 60 Hz [kW] 8.9–10.6/7.4–8.0 -
3 AC 230 V 50/60 Hz [kW] 15 -
Drive motor rating [W] 3,000 3,000
Fuse rating
3 N AC 380–415 V 50/60 Hz [A] 3 x 25 3 x 25
3 AC 200–208/220–240 V 60 Hz [A] 3 x 40 3 x 16
3 AC 230 V 50/60 Hz [A] 3 x 50 -
EL power cord
Washer-extractors - Professional
PW 418 [PW418]
© Miele & Cie. KG 2022 This information should not be duplicated or passed on without Miele approval. All rights reserved.01.11.2022

2.
11/1/22, 11:32 AM MSD
https://www3.miele.de/irj/portal/ 2/3
3 N AC 380–415 V 50/60 Hz mm2 5 x 4 5 x 4
3 AC 200–208/220–240 V 60 Hz mm2 4 x AWG 8 4 x AWG 14
3 AC 230 V 50/60 Hz mm2 4 x 10 -
Water connection
Cold [inches] 3/4 3/4
Cold hard [inches] 3/4 3/4
Hot ≤ 158°F [inches] 3/4 3/4
Hot ≤ 194°F [inches] - 1
Max. flow rate [l/min] 69.5–79.5 69.5–79.5
Drain connection
Drain valve DN 70 DN 70
Drainage rate
Drain valve, max. [l/min] 200 200
Connection
Condensate [inches] - -
Hot water [inches] - 1
Drum
Diameter
[inches
(mm)]
28.2 (715) 28.2 (715)
Depth
[inches
(mm)]
18.7 (475) 18.7 (475)
Volume [l] 180 180
Porthole diameter
[inches
(mm)]
16.4 (415) 16.4 (415)
Suds container (internal dimension)
Diameter
[inches
(mm)]
29.6 (750) 29.6 (750)
Depth
[inches
(mm)]
20.8 (528) 20.8 (528)
Speed
Washing [rpm] 38 38
Pre-spin [rpm] Program-dependent Program-dependent
Spinning [rpm]
Program-dependent, max.
1025
Program-dependent, max.
1025
Outer circumference linear speed
Washing [m/s] 1.5 1.5
Pre-spin [m/s] Program-dependent Program-dependent
Spinning [m/s]
Program-dependent, max.
35.6
Program-dependent, max.
35.63
g-factor
Washing 0.64 0.64
Pre-spin Program-dependent Program-dependent
Spinning Program-dependent, max. 361 Program-dependent, max. 361
Imbalance monitoring Electronic Electronic
Door hinge Right Right
Convertible door hinge No No
Door-opening angle [°] 180 180
Washer-extractors - Professional
PW 418 [PW418]
© Miele & Cie. KG 2022 This information should not be duplicated or passed on without Miele approval. All rights reserved.01.11.2022

3.
11/1/22, 11:32 AM MSD
https://www3.miele.de/irj/portal/ 3/3
Residual moisture in reference to EN 60456 (cold
wash)
[%] 55 55
Residual moisture in reference to EN 60456 (hot
wash)
[%] 50 50
Specific energy consumption for 140°F cottons
(hot water)
[kWh/kg] 0.081 0.081
Specific water consumption for 140°F cottons (hot
water)
[l/kg] 8.19 8.19
Required flow pressure
Minimum [kPa] - -
Maximum [kPa] 1000 1000
Largest removable part Suds container Suds container
Removal/installation time [h] 7/12 7/12
Width
[inches
(mm)]
31.6 (802) 31.6 (802)
Depth
[inches
(mm)]
27.9 (707) 27.9 (707)
Height
[inches
(mm)]
33.1 (839) 33.1 (839)
Material
Base Galvanized steel Galvanized steel
Drum Stainless steel Stainless steel
Suds container Stainless steel Stainless steel
Front Powder-coated steel Powder-coated steel
Lid Powder-coated steel Powder-coated steel
Rear panel Galvanized steel Galvanized steel
Side panels Powder-coated steel Powder-coated steel
Kinetic energy [Nm] 6,324 6,324
Heat dissipation rate to installation site [MJ/h] 6.48 -
A-weighted noise power level LWA
Washing [dB] 62 62
Spinning [dB] 77.3 77.3
Workplace-related sound pressure level
Washing [dB] 54 54
Spinning [dB] 65 65
Minimum ambient temperature in operation [°F] 32 32
Maximum ambient temperature in operation [°F] 104 104
Maximum installation height [feet (m)] 6560 (2000) 6560 (2000)
Maximum humidity in operation No condensation No condensation
Service life in operating hours [h] 30,000 30,000
Machinery Directive Yes Yes
Certification marks CE CE
Washer-extractors - Professional
PW 418 [PW418]
© Miele & Cie. KG 2022 This information should not be duplicated or passed on without Miele approval. All rights reserved.01.11.2022