This document is a resume for G.V. RAMA MURTHY, an offshore safety and health professional with over 18 years of experience in the oil and gas industry. It summarizes his work history in roles such as materials controller, offshore materials coordinator, assistant control room operator, and 3rd engineer on cargo ships. It also lists his extensive safety training and certifications in areas like occupational safety, supply chain management, offshore operations, and computer skills.

1. G.V. RAMA MURTHY
E 507 Gulmohar Gardens, Sakthi Sai Nagar, Mallapur, Hyderabad 500076, India
r_murthie@yahoo.com ; www.linkedin.com/in/gvramaurthy/ ; Ph.: 0091 9848564750, 91 40 27156560
OFFSHORE SAFETY & HEALTH PROFESSIONAL - OIL & GAS
Career Synopsis:
∼ Wide exposure in different designations in upstream and downstream offshore oil industry for more than 18
years with reputed organizations in countries like West Africa (Angola, Congo, Equatorial Guinea,
Cameroon and Nigeria), Asia (Singapore, Indonesia) and South Africa.
∼ Proven track record of contributions and successful completion of tasks in earlier assignments in different
designations in offshore oil and gas industry both in both upstream and downstream.
Skills & Training:
∼ Very strong knowledge base in Offshore Oil and Gas Safety and training
∼ Diverse experience in marine engineering, mechanical maintenance.
∼ Adept at computer software and hardware.
∼ Expertise as offshore materials coordinator in the oil industry.
∼ Passion for training in Safety
A. Occupational safety and health certification and training
- Waiting for the results of NEBOSH International Technical Certificate in Oil & Gas Operational
Safety
- 233 Hour Oil and Gas Safety and Health Professional - Includes the following Programs;
Certificates are at https://goo.gl/WcrRm0
1. Oil and Gas Safety and Health Professional
2. Oil and Gas Safety and Health Manager
3. Oil and Gas Safety and Health Supervisor
4. Oil and Gas Safety and Health specialist
5. Oil and Gas Safety and Health Train-The-Trainer
- 132 Hour Occupational Safety and Health Professional – Includes the following Programs;
Certificates are at https://goo.gl/WlaZKN
1. Occupational Safety and Health Professional
2. Occupational Safety and Health Manager
3. Occupational Safety and Health Specialist
4. Occupational Safety and Health Supervisor
5. Occupational Safety and Health Trainer (Train-The-Trainer)
6. Safety and Health Committee/Team Leader
7. Safety and Health Committee/Team Member
The above main two programs includes the following Courses
1. Introduction to Safety Management
2. Effective Safety Committee Operations
3. Effective Accident Investigation

2. 4. Introduction to OSH Training
5. Hazard Analysis and Control
6. Hazard Communication Program
7. Conducting a Job Hazard Analysis
8. Effective Safety Committee Meetings
9. OSHA 300 Recordkeeping
10. Personal Protective Equipment
11. Energy Control Program - LOTO
12. Introduction to Ergonomics
13. Safety Supervision and Leadership
14. Confined Space Program
15. Fall Protection Program
16. Electrical Safety Basics
17. Safety Management System Evaluation
18. Emergency Action Plans
19. Fire Prevention Plans
20. Fleet Safety Management
21. Preventing Workplace Violence
22. Developing OSH Training
23. Ergonomics Program Management
24. Conducting OSH Training
25. Introduction to Machine Guarding
26. Introduction to Process Safety Management (PSM)
27. Introduction to Industrial Hygiene
28. Hearing Conservation Program Management
29. Blood borne Pathogens Program Management
30. Trench and Excavation Safety
31. Fall Protection in Construction Elements for 29 CFR 1926.500-503
32. Oil and Gas Safety Management
33. Oil and Gas Hazard Awareness
34. Well Site Preparation & Drilling Safety
35. Well Site Completion and Servicing Safety
36. Oil and Gas Well Inspection
37. Oil Spill Cleanup
38. Introduction to SEMS II 30 CFR 250.1900-1933
39. Offshore Oil and Gas Safety I
40. Offshore Oil and Gas Safety II
- ‘Open Source Safety‘ website Certificates includes the following certificates and they are at
https://goo.gl/xgn5oT
1. Construction Industry 10 Hour Program Certificate
2. General Industry 10 Hour Program Certificate
3. HazWoper 8 Hour Refresher Course
4. HazMat 8 Hour Program Course
5. Package Based on IADC RigPass |Safeland USA Curriculum
6. Package Based on IADC RigPass Offshore | SafeGulf Curriculum
7. Other 100+ Safety courses
- ‘Oregon OSHA’ website Safety courses Certificates and they are at https://goo.gl/rY7bo2
- ‘Skillsoft’ website Safety courses certificates and they are at https://goo.gl/tsn3JH
- ‘Work safe B.C’ website supervising for safety Course Certificate and is at http://goo.gl/LGAW89
and https://goo.gl/OMvxSS
- Diploma in Workplace safety and health 2013 From Website - www.alison.com

3. B. Supply chain and related certification and training
- Post Graduate Diploma training in Materials management (2004, Annamalai University, Tamilnadu)
- Diploma training as Store keeper (2005, Indian institute of Materials Management, Mumbai)
- Diploma in Operations Management (2013, www.alison.com, online)
- Logistic, supply chain management and safety courses https://goo.gl/tsn3JH
C. Offshore and related certification and training
- Marine Engineering Refresher course (2010, T. S. Rahaman, Mumbai)
- Advanced STCW 95 courses, Including BOSIET and H2S courses.
- Different modules of on job rig training.
D. Computer literacy
- Brainbench Online Office skills certificates at http://www.brainbench.com/transcript.jsp?pid=3115275
Computer literacy
Computer technical support
MS Excel 2010
MS Word 2010
MS Power point 2010
MS Outlook 2010
Technical help desk
Microsoft security
E. Professional Qualification
∼ Valid Panama C.O.C, 3rd/ Engineer license, Marine Engineering refresher Course, 2010 - T.S. Rahaman
Institute, Mumbai.
∼ Diploma in Stores Management, Warehousing, 1st.class with Distinction, 2005 - Indian institute of Materials
Management, Mumbai.
∼ Post Graduate Diploma in Materials management, 2004, 2nd. Class - Annamalai University, Tamilnadu.
Professional Experience:
SUBSEA 7
Materials Controller, Supply chain management, Pointe Noire. (Oct to Dec 2014 – Project job)
Reported to Hookup Manager and assisted by Store keeper
Contributions:
- Co-ordinated and ensured the proper store activities and all associated activities including receipt, storage and
issue of materials, equipment and record keeping in a proper manner.
- Kept track of inventory in the yard for Hookup department.
- Liaised with the Material Support Controller on a daily basis to track and trace outstanding spare parts, tools and
equipment orders.
CALDIVE INTERNATIONAL LTD, USA
Offshore Materials Controller, Pipe laying and heavy lift Barge SEA HORIZEN. (FEB to May 14 – Project job)
Reporting to: Materials supervisor.
Contributions:
- Managed the preparation of receipts, issuance and inspection of documentation in order to track inventory and to
manage store space
- Ensured recurring consumables at minimum stock level and they are maintained in working condition.
- Was responsible for the issuance of reports and compile stock inventory inspection checks in order to update on
all consumable stock availability.

4. LEIGHTON OFFSHORE PTE LTD. MALAYSIA
Offshore Materials Controller, Pipe laying Barge ECLIPSE. (June 2013 to Sept 2013 – Project job)
Reporting to: Chief engineer
Contributions:
- Established and maintained computerized material spare parts inventory control system by occasionally appraising
minimum and maximum stock levels in accordance to company’s inventory control guidelines.
- Managed, supervised the ordering of recurring consumables at minimum stock level in order to maintain
consumable stock and ensured consumable stock is in working condition.
- Prepared and participated successfully in annual stock taking of stores by third party.
STG LTD. West Africa
Offshore Store Keeper, DP3 Heavy lift & Accommodation barge JASCON 31. (May 2012 to April 2013)
Reporting to: Chief engineer; assisted by 1 subordinate.
Contributions:
- Functioned as overall in-charge of warehousing; controlled and monitored inward and outward movement of
materials.
- Maintained zero variance w.r.t. STAR IPS system; ensured proper documentation in STAR IPS system.
- Conducted annual inventory of different stores.
- Mentored and trained 2 new recruits in Stores dept.
- Installed proper coding in different stores of warehouse and updated in system.
- Liaised with department heads in the preparation of materials requisitions for all parts and equipment; focused on
planning to minimize urgent orders; forwarded approved requisitions to the shore base office
INTERSHIP LTD. West Africa and Indonesia
Offshore Materials Coordinator, Logistics warehousing & Accommodation barge CAMELOT and DP3
Accommodation Barge LANCELOT (Oct. 2010 to Dec 2011 – Initial Warehouse setup job)
Reported to: Barge master
Contributions:
- Held complete charge of warehousing, monitoring inward/outward movement of materials.
- Performed cyclical inventory audits.
- Prepared manifest for all equipment dispatched from the barge either by sea or by air.
- Actively participated in the weekly meetings, Improvement Process, and all other Company safety management
systems.
TRANSOCEAN LTD. West Africa
Assistant Control Room Operator, Semi-submersible M.G.HULME and JIM CUNNINGHAM (Feb 2004 to Apr 2009)
Reported to: Barge Master
Contributions:
- Supervised installation and commissioning of new oily water separator.
- Carried out watch keeping, maintenance and repair of ship’s machinery, propulsion and reduction gear systems.
- Assisted in monitoring and operation of Rig Stability & Rig Safety alarm system.
- Trained in ballast control operator module and anchor winch operator module.
Mechanic/Motorman, M.G.HULME (June 2000 to Feb. 2004)
Reported to: Chief Mechanic
DENIZCILIK. Asia & Europe
3rd
Engineer, General Cargo Ship ‘Alper Bilici’ (Feb – May 1998)
Reported to: Second engineer; assisted by Motormen and oilers
- On line resume : https://goo.gl/5xNpqA