O slideshow foi denunciado.
Utilizamos seu perfil e dados de atividades no LinkedIn para personalizar e exibir anúncios mais relevantes. Altere suas preferências de anúncios quando desejar.
Próximos SlideShares
SAP Web Dispatcher - Best Bits
Avançar
Transfira para ler offline e ver em ecrã inteiro.

1

Compartilhar

Baixar para ler offline

SAP LVM Post Copy Automation Integration

Baixar para ler offline

A brief overview of how to integrate PCA with LVM Enterprise Edition to streamline system copy post processing and free-up administrators time.

SAP LVM Post Copy Automation Integration

  1. 1. SAP  LVM  Post  Copy  Automation  Integration
  2. 2. • This is the third in a series of presentations dedicated to SAP Landscape Virtualization Management (LVM) • This document provides a quick overview of how to integrate SAP LVM Post Copy Automation (PCA) in SAP LVM • The document is aimed at system administrators responsible for configuring SAP LVM and performing SAP system copies • The document assumes the reader has a high level of experience with system copies and associated terminology Introduction
  3. 3. Overview • SAP LVM Enterprise Edition can be used for various system provisioning activities such as cloning, copying, refreshing and renaming of SAP systems • With Enterprise Edition, customers have the option to use PCA for ABAP and Java systems • SAP LVM Enterprise Edition allows integration of PCA for SAP systems without activating them for provisioning activities i.e. it can be invoked in standalone mode • This document focuses on the integration of standalone PCA with an example showing steps following a database refresh
  4. 4. Pre-­‐Requisites  in  ABAP • Before integrating PCA with LVM you must configure PCA in the back-­‐ end systemthat is the target of the systemcopy • An overview of this configuration is available in SlideShare document entitled “SAP Post Copy Automation” • In addition to this configuration, a system user (e.g. LVMADM) with high authorizations (e.g. SAP_ALL) is required in all clients excluding client 000 • This system user is used during the PCA BDLS task in the back-­‐end systemvia RFC calls from client 000 to all other relevant clients • Ensure you know the password for SAP* in client 000 of the source system as this will be needed by PCA before the user masters are imported into the new target system
  5. 5. Configuration  in  LVM • Before being able to perform any system copy or refresh related activities, the system must be enabled for provisioning in LVM • The system is enabled for provisioning in the “Systems” tab under the “Configuration” section
  6. 6. Configuration  in  LVM • Edit the system for which provisioning should be enabled and select the “Standalone PCA” radio button in the “System and AS Provisioning” section
  7. 7. Configuration  in  LVM • Now, in the “Provisioning” section, with the system selected, you will see the new button “Standalone PCA” • Standalone PCA can now be executed for this system
  8. 8. Task  Lists • Depending on your scenario (i.e. copy or refresh) you will need to decide which PCA tasks to execute in the system • For a system copy, you’ll probably want to include PCA standard task lists SAP_BASIS_COPY_INITIAL_CONFIG and SAP_BASIS_COPY_BDLS • For a system refresh (export), you’ll probably want to include PCA standard task lists SAP_BASIS_COPY_REFRESH_EXPORT • For a system refresh (import), you’ll probably want to include PCA standard task lists SAP_BASIS_COPY_REFRESH_IMPORT and SAP_BASIS_COPY_BDLS
  9. 9. Execution  for  System  Refresh • Start the standalone PCA with type “Task List Execution”
  10. 10. Execution  for  System  Refresh • Using the “Add” button and drop-­‐down, add tasks – SAP_BASIS_COPY_REFRESH_IMPORT – SAP_BASIS_COPY_BDLS • Modify the parameters for the BDLS task
  11. 11. Execution  for  System  Refresh • Add logical systems pairs to be converted during the BDLS execution
  12. 12. Execution  for  System  Refresh • When all tasks have been added and parameterized, move on to the summary screen
  13. 13. Execution  for  System  Refresh • Start the execution
  14. 14. Monitoring  the  Execution • Basic monitoring of the standalone PCA execution can be done via the “Monitoring” section in LVM
  15. 15. Monitoring  the  Execution • Detailed monitoring on the progress of individual tasks within the PCA task lists can be done in the ABAP back-­‐end system using transaction “STC02” in client 000
  16. 16. Reference  Material • The  following  pages  on  SAP  Help  are  useful: – Provisioning  Systems – System  Copy – System  Refresh – Refreshing  a  Database  Only • Further  details  are  available  on  request   – mailto:info@aliterconsulting.co.uk
  17. 17. Thank-­‐you
  • ksrinu06

    Oct. 16, 2020

A brief overview of how to integrate PCA with LVM Enterprise Edition to streamline system copy post processing and free-up administrators time.

Vistos

Vistos totais

188

No Slideshare

0

De incorporações

0

Número de incorporações

3

Ações

Baixados

9

Compartilhados

0

Comentários

0

Curtir

1

×