Commercial & residential carpet cleaning company servicing Rockville in Montgomery County, Maryland and the entire DMV area.

1. 5 Carpet Cleaning Methods to Consider
Starting a carpet cleaning company may be a very rewarding career move. All you have to do next is
get your hands on the right machines, including pressure washing equipment, truck mounted and
portable carpet cleaning machines and commercial steam cleaners. The chances are endless once
you've gear up with all the tools that are very best. You'll be able to supply your customers a number
of services, including pressure washing, carpet cleaning, upholstery cleaning and tile cleaning.
Consider specializing in water damage restoration, stain removal and grout cleaning too.
Carpet cleaning is performed with truck mounted machines, depending on the positioning. In the
event you are entering into a multi story building, a portable carpet cleaner would suffice. There are
multiple methods you can utilize to clean carpets. The following are five techniques that have been
used over time.
Hot Water Extraction
Another name with this is steam cleaning. You can find great quality commercial carpet steam
cleaners on Steam-Brite.com. This method requires you to spritz the carpet with a pre- aerosol, then
agitate it using a machine with brushes or manually with a wand. Afterward, you hot water rinse the
region to take away the soil and soap. The wand vacuums up the hot water that is sprayed out in
order to take away the pre-aerosol. You'll need to discover if the carpet is natural or artificial, so the
proper solutions are utilized. Make sure to have air flow to help dry the carpets. This method uses
plenty of water, therefore the carpets will be very wet. Fans can also help with drying times. A truck
mounted carpet cleaning machine will help remove bulk of the water from carpets and has lots of
suction.

2. Dry Compound
This includes products which are 98 percent biodegradable. You brush it in or distribute this over the
carpet within an even layer and after that scrub. The compound attracts dirt and grime, cleaning
carpets instantaneously without water. For commercial applications, a cylindrical counter-rotating
brush system is normally used.
Encapsulation
This process emerged in the 1990s. It crystallizes soil particles or encapsulates, turning them upon
contact into dry deposit. In a sense, these act like tiny sponges, dissolving and then absorbing soil
from your carpet. A cleaning solution is then applied using compression sprayer or a brush
applicator, rotary machine. Prior to the cleaning process starts, the dry residue may be vacuumed
up.
Bonnet
In this method, you spray the top of the carpet with a pre-aerosol, then scrub it in using a round or
bonnet buffer. It runs on the rotation movement, like a floor buffer. It features absorbent spin pads
that bring soil, which will be then rinsed. Water is used during this method, and will take a
considerable amount of time to dry. It's very important to note this procedure only addresses the
very best third layer of the carpet. It is a solution that is quick and is not recommended for deep
cleaning, such as removal of odors and stains. Get far more information about
http://www.montgomerycarpetcleaners.org/
Shampoo

3. This can be the older method for cleaning carpets, which came about during the 1970s. This soon
changed once hot water extraction and encapsulation products came to marketplace. The shampoo
consisted of coconut oil soaps, which create tacky deposits or a foamy. It was a difficulty, because it
pulls dirt and cause carpets to eventually become dirty fast. You seldom discover this method being
used .