1. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
ANTONY JOY MAMPILLY
Offshore & Onshore Employment (Present job):
Company: - Oman Oil Company Exploration & Production LLC (Agency : Velosi - Oman)
Project: - MUSANDAM GAS PLANT PROJECT (Onshore Plant/Tank Construction & Offshore Pipeline
& SBM installation Project)
Designation: - Sr. Quality -Welding& Painting / Coating, Mechanical / Structural, Insulation & Pipeline/Piping
Inspection & Tankage fabrication
Location: - Khasab-Oman , Period: September 2012 till date.
NDT for the project: AUT for offshore pipeline & RT, Manual UT, & MPI for onshore structural & piping.
Offshore Employment (Past job):
Company: - BW OFFSHORE (Agency : OCS singapore)
Project: - Modification of 32 ton Crane (Shutdown Project)
Designation: - Quality Supervisor (Welding, Painting & NDT)
Barge: - AZURITE - FDPSO
Location: - Congo Offshore – Kazakhstan, Period: March 2012 till April 2012.
NDT for the project: RT, Manual UT, & MPI
On shore & Offshore Employment (Past job):
Company: - Germanischer Lloyd - Noble Denton
Project: - Shah Gas Development Project Package 5 (Cross Country Pipelines)
Client: - Abudabhi Gas Development Company Limited (AL HOSN Gas)
Designation: - Onshore Vendor Inspector & OffshoreThird Party Inspector – Welding, Coating & AUT
Location: - Abu Dhabi – United Arab Emirates, Period: July 2011 till October 2011.
Offshore Employment (Past job):
Company: - Saipem SPA – ENI Group
Project: - KASHGHAN OFFSHORE FIELD DEVELOPMENT & EXPERIMENTAL PROJECT
(Owner: AGIP KCO – SHELL JV )
Designation: - QA / QC Inspector (Welding, Painting & Coating, NDT)
Barge: - Castoro 12
Location: - Kazakhstan Offshore – Kazakhstan, Period: March 2010 till July 2011.
NDT for the project: RT, Manual UT,& MPI
Offshore Employment (Past job):
Company: - MOODY INTERNATIONAL – ABU DHABI
Project: - OAG 3 Offshore Pipeline Project (Owner: ABU DHABI GAS INDUSTRIES LIMITED - GASCO )
Designation: - Client Inspector (Welding, Painting & Coating, NDT)
Contractor: - National Petroleum Construction Company
Barge: - DLB 1000
Location: - Das Island & Abu dhabi Offshore – India, Period: May 2009 till October 2009
NDT for the project: AUTO UT, Manual UT,& MPI
PIPELINE ENGINEER
2. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
Did 4 Days Training for Automated Ultrasonic Testing (AUT), Phased Array
Method from Occeanering – UAE
Offshore Employment (Past jobs):
Company: - BECHTEL INTERNATIONAL INC. HOUSTON-USA
Project: - KG D6 Block Field Development Project (Owner: Reliance Industries Limited - India)
Designation: - Client Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Contractor: - Allseas Offshore
Barge: - MV. LORELAY (Dynamic Position 3, Pipe Lay barge)
Location: - Bay of Bengal – India, Period: 30/09/2007 till 15 Jan 2009
NDT for the project: AUTO UT, Manual UT,& MPI
Water Depth: 400 to 2500Meters, Deep Water Line Project with Piggy Back
Offshore Employment (past jobs):
Company: - BECHTEL INTERNATIONAL INC. Thailand
Project: - JDA A18 to B17 Gas Pipeline Project (Owner: TTM-Thailand)
Designation: - Client Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Contractor: - GLOBAL INDUSTRIES
Barge: - DLB - SEMINOLE (GLOBAL - Derrick Pipe Lay barge)
Location: - Gulf Of Thailand – Thailand, Period: 03/08/2007 till 15/09/2007
NDT for the project: AUTO UT, Manual UT,& MPI
Offshore Employment (past jobs):
Company: - BECHTEL INTERNATIONAL INC. Thailand
Designation: Pipeline engineer
Location: - Bechtel Head Quarters in Bangkok
Scope of Work: Working under Mr. Jakobsen Morten - Project Engineering Manager – Bechtel & Mr. David Miller –
Project Manger Bangkok-Thailand (dmiller1@bechtel.com )
1. Review Procedures / Documents related Welding, Painting/Coating, Offshore construction like Pipe laying,,
Jacketing, Commissioning & Pre-Commissioning.
2. Review Engineering Documents / Calculations related to design analysis of Heavy Lifting, & Pipe laying,
3. Review Engineering drawings for Lifting, Anchor operations, P & ID’s.
Offshore Employment (past jobs):
Company: - BECHTEL INTERNATIONAL INC. Thailand
Project: - JDA A18 to B17 Gas Pipeline Project (Owner:- PTT-TTM Thailand)
Designation: - Client Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Contractor: - HYUNDAI HEAVY INDUSTRIES
Barge: - HYUNDAI 2500 (Hyundai - Derrick Pipe Lay barge)
Location: - Gulf Of Thailand – Thailand, Period: 13/06/2007 till 15/7/2007
NDT for the project: AUTO UT, Manual UT,& MPI
Scope of job for HYUNDAI 2500: Jacket Installation & Pipe Spool fabrication & Above Water Tie In, Pigging
& Hydro test, Pre-Commissioning.
Offshore Employment (past jobs):
Company: - BECHTEL INTERNATIONAL INC. Thailand
Project: - NEW OFFSHORE CRUDE OIL UNLOADING FACILITIES (Owner: Thai Oil-Thailand)
Designation: - Client Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
PIPELINE ENGINEER
3. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
Contractor: - SAIPEM. SPA
Barge: - CASTORO OTTO (Self Propelled Derrick Pipe Lay barge)
Location: - Gulf Of Thailand – Thailand, Period: 16/04/2007 till 18/05/07
NDT for the project: AUTO UT, Manual UT & MPI
Scope of job for CASTORO OTTO: Pipe laying of 52” x 25.4mm API 5L X 65 Pipeline for 15Km &
Installation of PLEM & Installation of SPM Buoy
Offshore Employment (past jobs):
Company: - BECHTEL INTERNATIONAL INC. Thailand
Project: - Third Transmission Pipeline Project – Part 3 (Owner:- PTT-TTM Thailand)
Designation: - Client Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Contractor: - SAIPEM. SPA
Barge: - SEMAC-1 (Derrick Pipe Lay barge)
NDT for the project: AUTO UT, Manual UT,& MPI
Location: - Gulf Of Thailand – Thailand, Period: 01/12/2006 to 14/04/2007
Scope of job for SEMAC-1: Pipe laying of 42” x .886” API 5L X 70 Pipeline for 150Km & SSIV Asseembly
Spool Tie-In & Pigging & Hydro test, Pre-Commissioning..
Offshore Employment (past jobs):
Company: - Hyundai Heavy Industries Co., Ltd
Project: - Third Transmission Pipeline Project (Owner:- PTT-Thailand)
Period: - 28-04-2006 – 26.07.06
Barge: - HD-1000
Designation: - QA/QC Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Location: - Hat Yai - Thailand
NDT for the project : X-RAYS, Manual UT,& MPI
Scope of job for HD-1000 was Fabrications of TIE-In SPOOL, Lateral Fabrication, Riser Fabrication, Jacket
& Topside Installation, Pipe support fabrication, Concrete Mattress & Installation of the same.
On shore Employment - (Past Job)
Company: - SGS SUDAN LIMITED
Joining :- 28/11/05 to 04.12.05 & 04.02.06 to 05.04.06
Designation: - Third Party Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Location: - Port Sudan, Sudan.
NDT for the project: X-RAYS, Manual UT,& MPI
Project MELUT BASIN OIL DEVELOPMENT PROJECT- Port Sudan.
(Construction of Storage Tanks 82.1 mtrs Dia as per API 650)
Company: - SGS INDIA PRIVATE LIMITED
Joining: - 20.07.05 to 25.11.05 & January 2006
Designation: - Third Party Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical)
Location: - Mumbai, India
Offshore Employment (past jobs):
PIPELINE ENGINEER
4. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
Company: - Hyundai Heavy Industries Co., Ltd
Project: - Mumbai Uran Trunk Line Project (Owner:- ONGC-India, Consultant:- EIL)
Period: - 25-11-2004 to 11-05-2005
Barge : - Hyundai-60 ( Ex ETPM- Mc Dermott- DLB -1601 )
Designation: - QA/QC Inspector (Welding, Painting & Coating, NDT & Piping / Mechanical))
NDT for the project : X-RAYS, Manual UT,& MPI
Location: - Mumbai High, India
On shore Employment - (Past Job)
Site Name: -HPCL (Hindustan Petroleum Corporation Limited).
Tenure Period: - June 2002 to October 2004.
Designation: - Inspection Engineer- Welding, Painting & Coating, NDT & Piping / Mechanical
Company: - Aarvi Encon Private Limited
On shore Employment - (Past Job)
Site Name: -HPCL (Hindustan Petroleum Corporation Limited).
Tenure Period: - 01-07-2001 - 31-5-2002,
Designation: - Inspection Engineer - Welding, Painting & Coating, NDT & Piping / Mechanical
Location: - Mumbai, India.
Company: - Expo Gas Containers Limited
OFFSHORE Responsibilities
Online Responsibilities when working as Qa/Qc Inspector:
Carry out Procedure Qualifications as per Preliminary WPS..
Carry out Welding Consumable Qualification as when required by Client.
Carry out Welder’s Qualifications as per the Qualified WPS.
Carry out Pre Production Trials for Field Joint Coatings.
Qualify Coating Applicators as required by the Client.
Checking of Ovality of Pipe, Cement Coating, Random Checking length of the Pipe after Beveling.
Manual checking of the Bevels for GMAW and SAW, SMAW, FCAW welding Procedures using .
Inspection of Fit Ups in Station 1 and Visual of welds after Final Weld Visual before NDT.
Monitoring the online welding parameters as per approved WPS.
Checking the pipeline arrangement according to the drawings i.e. Anode arrangement etc.
Carried out MPI & UT (Lam Check) after beveling for pipes when reused after rejection in NDT.
Interpretation of Radiograph films, Worked with AUTO UT also.
PIPELINE ENGINEER
5. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
Carried out Welding repairs according to certified welding procedures
Checking of cleaning & Preheating of pipes before field coating.
Holiday testing of field coatings (HSS) before HDPF Filling.
Carried out Peel test & HDPF Foam Testing like Density & Ratio test as per Inspection Quality Plan.
Carry out repair on Field Joint Coating & 3LPE as per the approved procedures.
Visual inspection of SSIV’s and other valves before Installation
Inspection of fabrications of lateral spools according to certified drawings.
Making Final QA/QC Documents for Marker Pipes, Pipe Joint Identification Records, Buckle Detectors,
Coating Reports, Foam Sample Reports, Procedure Qualification, Welder Qualification, Welding Consumable
Qualification etc and getting it signed from the Client and Third Party.
Online Responsibilities when working as Client Inspector:
Monitoring the above said responsibilities done by the Contractor Qc.
Reviewing contractor’s QC records.
Monitoring Contractors’ inspectors/ workforce to ensure compliance to project specifications.
Carry out Pre Production Trials for Field Joint Coatings.
Monitoring safe working practices at all times.
Witnessed Jacket Installations & Top Side Installations & PLEM installations.
Witnessed Pigging & Hydro test, Pre-Commissioning works.
Witnessing Installation of PLETS, Corrosion Monitoring Spools.
Worked on Piggy Back line Installation
Making Daily DPR’s.
ON-SHORE Responsibilities in SUDAN
Witnessing Procedure Qualification.
PIPELINE ENGINEER
6. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
Witnessing Welder Qualification.
Witnessing Fit up of bottom shell & tanks shell as per the approved drawings.
Witnessing various test like Penetrating oil test, Vacuum Box test, Dye Peneterant test as per approved
procedures
Visual inspection of all welded joints.
Interpretation of Radiography films.
Witnessing of Hydrotest for the inside piping of the tanks.
Witnessing Hydro test & of the Tank & the air test of the Floating Roof.
Witnessing all Blasting & Painting procedures as per the approved Procedures
Reviewing of Material test Certificates & Contractor Qc reports.
REFINERY Responsibilities
SHUT DOWN EXPERINCE:-
Took active part in the inspection team performing Shutdown Inspection of Fluidized Catalyst Cracking Unit in
August-2002, Shutdown inspection of FR-APS in May-June 2003, Shutdown Inspection FRE-APS in December 2003,
Shutdown Inspection of Diesel hydro De-Sulphurisation Unit & FR-VPS unit in May 2004.
INSPECTION OF TANKS & PIPELINES: -
Inspection during downtime and on-stream inspection {OSI} of product storage tanks and transfer pipelines in the
offsite storage area and onsite area, as per statutory requirements. Fabrication inspectionof Tanks and transfer pipeline.
Witnessed various Inspection techniques such as DP test, Kero-Chalk test, Hydro test, Pneumatic test.
INSPECTION OF VALEVS, SAFETY VALVES & HEAT EXCHANGERS: -
Inspection of various coatings on gate valves. Conducted various hydro and Pneumatic test for Valves
Inspection of FRE coatings on heat exchanger. Witnessing safety valves and pressure vent testing in
workshop.
INSPECTION OF HEAT EXCHANGERS: -
Inspection of tube bundles and other accessories before & after hydro jetting. Witnessing Ring test, Tube test & final
test of heat exchangers according to the pressure stated in the drawing.
INSPECTION OF TOWERS & COLUMNS:-
Inspection of tower & Columns after cleaning, inspection of trays, shell, TSR, nozzles. Witnessed Magnetic Particle
Testing & DP test of all T-joints. Reviewd the thickness of the shell after Thickenss gauging with the original
thickness in the drawings. Witnessed Stress relieving after any welding.
PIPELINE ENGINEER
7. QA/QC Engineer / Inspector (Welding & Painting / Coating, Mechanical / Structural, Insulation & Piping Inspector)
INSPECTION OF FURNACE, BOILERS :-
Inspection of furnace tubes in convection, radiation section & studed tubes & Boiler tubes. Reviewing the thickness
of all the tubes after thickness gauging with the original thickness in the drawing. Inspection of condition of the
keepers and supports of the various tubes. Fabrication inspection if any tube or shell replacement. Inspection of the
refractory condition and repair of the same. Witnessing hydro test of the complete tube circuit finally.
INSPECTION OF PAINTING, INSULATION & FIREPROOFING: -
Witnessed stage wise inspection of painting and insulation of pipelines, Exchangers, Towers, Valves, Stacks, Tanks
and structural. This includes surface preparation (manual & shot blasting), checking the paint DFT of various coats
with Elcometer and checking the foil, mattress and weather cover in case of insulation. Inspection of fireproofing of
columns and tower skirts.
NON DESTRUCTIVE TESTING: -
Witnessed various NDT’s like DPT, Holiday test, MPT, UT, RT before and after fabrication, all T- joints in
Drums, Towers etc.
Personal Information
Education :- Date: 5/2001 Diploma In Mechanical Engineering
Shivaji Rao Jhondhale Polytechnic, Mumbai, Maharashtra, India
Final Year Percentage: - 55.53%
Date: 5/1996 High School or equivalent
Model English School, Mumbai, Maharashtra, India
Percentage Attained: - 60.53%
BGAS-CSWIP- Painting Inspector Cert N0 25999
CSWIP 3.1- CSWIP Cert N0 21199
ASNT Level II in Radiographic Film Interpretation
ASNT Level II in Ultrasonic Testing
ASNT Level II in Dye Peneterant Test
ASNT Level II in Magnetic Particle Test.
Computer :- Win 98, MS-Office, Internet Operations, Auto Cad
Passport No :- A – 9901913 (INDIAN)
Date Of Birth :- 8TH
APRIL 1981
ADDRESS :- A-Wing, Flat no 12, Poonam CHS, 2ND Cross Ghanshyam Gupte Road, Vishnunagar,
Dombivili {West}, Thane-421202, Maharashtra – India.
Tel: :- 0091-251-2486020 (Residence in India)
0091-9004609287, 9029812873 (Residence Hand phone/Mobile in India)
0091- 9769704708, 9930751866 (Residence Hand phone/Mobile in India)
PIPELINE ENGINEER