1. Amr Yousry Mohammed Mowafy
220, Kattameya Dunes, New Cairo City, Cairo, Egypt | +201063781511 | amr.yousry@tecnomareegypt.com
Objective
I am Senior Mechanical Engineer with more than 10 years of experience in engineering and Oil & Gas business. I am
looking for new challenges to show my technical and managerial skills and to increase my experience. I believe that this
can be achieved by working in highly professional and dynamic organization that deals with technology and gives space
for its people to be creative and show their ability to develop new technologies and solve complex problems. I have the
courage of change and I don't ever get board from perform extensive research and learn new stuff and take decisions. Due
to this I gained wide experience in my career and I perform a lot of different activities.
Education
MASTERS | 01-2011 | AL-AZHAR UNIVERSITY
 Title: Navigation and Control of an Autonomous Mobile Robot
 Discipline: Mechanical Engineering
 Achievements:
 Establishing Dynamic and Kinematic Model for different types of autonomous mobile robots to be used in
simulations.
 Create a non-linear asymptotically stable path tracking control using Lyapunov theory taking into consideration the
dynamic effects of the robot.
 Implement simulations using SIMULINK based on the above mathematical models.
 Construct a robot prototype equipped with the required sensors such as ultrasonic sensor, Accelerometer, GPS,
Laptop.
 Labview was used for controlling the robot.
BACHELOR DEGREE | 06-2005 | AIN SHAMS UNIVESITY
 Major: Power Mechanical Engineering
 Minor: Industrial Engineering.
 Main Courses:
 Physics, Mathematics, Statics, Dynamics, etc.
 Fluid Mechanics, Thermodynamics, Heat Transfer, Combustion.
 Thermal Power plants, turbo machinery, Thermal Power Plants, etc.
Publications
 Mowafy, Amr, and Ayman El-Badawy. "Globally Stable Integrated Kinematic and Dynamic Control for Trajectory
Tracking of a Mobile Robot Provided with Caster Wheel." Proc. of Al-Azhar Engineering Eleventh International
Conference, Egypt, Cairo. 2010. Print.
Certificates
 Chartered Engineer and Member of the Institution of Mechanical Engineers.
 Professional Engineer and Member of APEGA (on-going).
 ASME Member

2. 2
Skills & Abilities
DESIGN & ENGINEERING SKILLS
 Perform Feasibility Studies and Conceptual Design for Oil & Gas Plants.
 Perform vibration analysis on different piping system taking into consideration high frequency acoustic vibration,
Turbulent flows and induced vortex shedding due to Thermowells.
 R&D projects for Enhancement Oil Recovery, Enhancement Energy recovery through regeneration packages and
renewable energy.
 Issuing Design & FEED Documents for different mechanical packages for onshore, offshore and subsea equipment. Such
as Micro-turbines, Diesel Engines, Chemical Injection Packages, Pressure Vessel Separators, Low Temperature
Separators, Sealines, manifolds, etc.
 Design of Subsea equipment such as X-Trees, Subsea HIPPS, spools, Pipeline End Manifolds, and umbilicals.
 Issue Hydraulic Schematic Diagrams for Subsea Control Modules of subsea X-Trees and Subsea HIPPS.
 Performing hydraulic calculations for piping and pipelines.
 Pipeline Thickness Calculations, On-Bottom Stability Analysis, Local Buckling Study.
 Material Selection Study for onshore, offshore and subsea projects.
 Pressure Vessels and Shell & Tube Heat Exchangers detailed engineering.
 Project engineering for many Mega projects.
 Robotics, dynamics and kinematics.
SOFTWARE SKILLS
 ANSYS
 Autopipe
 PVElite
 AutoCAD
 LabVIEW
 SIMULINK
 Pipe Flow Expert
 Pipesim
 Pipenet
LEADERSHIP
 I am Leading 4 intermediate experienced engineers.
 Leading many contractors and vendor simultaneously during projects.
Experience
LEAD MECHANICAL ENGINEER | ENI | 01-05-2008 TILL NOW
 R&D Project for Design of Desalination water and Polymer Injection [2015 till now], performing selection and
technical review on water injection pumps and other static equipment.
 R&D project for Energy Enhancement using regeneration Rankine Cycles and utilizing new wind turbines.
 Zohr deepwater Subsea Project performing Basic & FEED documents, Technical evaluation for different offers, and
attending technical clarification meetings.
 Zohr Onshore project acting as Mechanical and Package Engineer performing detailed design review for various
mechanical packages such as Tanks, pumps, Inspection Test plans and others.
 DEKA offshore and Susbea Development Project – Eni Egypt [2011 till now] (OneSubsea Was the Subsea Contactor)
(Subsea Manifolds, X-Tree and HIPPS), issuing Design/FEED Documents, XT’s P&IDs, reviewing vendor print
engineering documents, Test Inspection, Installation supervision of the on the rig.

3. 3
 Nidoco project technical evaluation of piping bulk material such as valves, Insulation Joints, Line Pipes, and other
fittings.
 Petreco Fire Fighting Upgrading [2015 till now], involved in the HSE study for installation of F.F equipment,
Design/FEED for Foam Tanks, pumps, piping material specification and valves selection.
 Meleiha Gas Plant [2014 till now], performing the Design/FEED and detailed engineering for piping manifold skids,
Material Selection Report, chemical injection packages, detailed engineering and vendor print review for rental gas
plant equipment. Supporting Client for Mechanical Completion, Pre-Commissioning, Commissioning and Start-up of
the Gas Plant.
 Denise B Subsea Development Project – Petrobel Co. [2011] (GE was the Subsea Contractor) (Subsea Manifolds,
X-Tree and HIPPS), issuing Design/FEED Documents, reviewing vendor print engineering documents, Test Inspection,
Installation supervision on the rig.
 North Bardawil Subsea – Petrobel Co. [2009] (GE was the Subsea Contractor), witnessing Well Intervention and
Test System Integration Test at IEOC base in Portsaid.
 Tazerka Subsea – Eni Tunisia [2011] (Subsea Pipeline End Manifold), issuing Design/FEED documents for
PLEM, subsea valves and Technical Supply Specification.
 Tuna gas production Offshore platform – Petrobel Co [2008] - (Subsea Pipeline End Manifold and Subsea Isolation
Valve), issued Design/FEED documents for PLEMS, SSIV and subsea valves, reviewing vendor print documents and
working as interface engineer during topside facilities design.
 SETH gas production offshore platform – Petrobel Co. [2010] (Subsea Pipeline End Manifold and Subsea Isolation
Valve), issued Material Selection Report, PLEM Design/FEED and detailed engineering, topside facilities
Design/FEED engineering and issuing Piping Material Specification.
 Pipeline Crossing Verification – United Gas Derivative Company [2012]
 Onshore Pipelines Detailed Design – Agiba Co. [2011]
 Regeneration Gas Heater Design – United Gas Derivative Company [2012]
 Mechanical Engineer - EL Gamil Glycol Upgrading – Petrobel Co. [2011]
 Belayim Water Injection Plant– Petrobel Co. [2010/2009], issued Material Selection Report, Design/FEED docs for
injection pumps, pressure vessels, P&IDs, issued technical evaluation reports, KOM and HAZOP Meetings.
PROJECT MECHANICAL ENGINEER | PETROBEL | 01-01-2006 TO 30-04-2008
 Company Representative many offshore Projects [Offshore]
 Baltim slug catcher short term solution [Head office Basis], technical piping engineering, quality control engineering,
MTO issuance and project coordination and issuing action plans.
 Fayrouz project - Rental facilities [Head office Basis], technical piping activities, project coordination, technical
evaluation and technical support member of many bid committees.
 Providing Technical Evaluation and Technical Support Member in biddings for many projects [Head office]
 Projects Field Engineer for 6 onshore mega projects [Onshore], supervise piping fabrication, perform pre-
commissioning, commissioning and start-up support. QC supervision and issue isometrics.
Personal Information
 I am Canadian and Egyptian.
 DOB: 26/01/1983.
 Married and has two children.