2. Fitted shape (standard doorknob
becomes sleek handle)
Color-tinted, faceted
polycarbonate lens
Standard doorknob
Adaptable silicone boot
ABS construction (various
color options available)
Manual
on/off switch
3 AAA batteries
108-degree passive infrared (6- to 9-month
sweep with 8-foot range lifespan)
Open core for access to
lock or keyhole
Dual high-brightness LEDs (various
color options available); ten-second
auto-dimming shutoff feature
illumi-knob motion sensing doorknob light
™
Glows when you need it
3. 10-foot cable extends between “low-battery” car and “full-battery” car
Top
Hand-crank
recoils the cable
No need to lift the hood! Recharges a low
battery in approximately 15 - 30 minutes.
Bottom
Display screen
Jump Starter Car-Battery Charger
™
Safely charges a car battery using 12V vehicle cigarette lighters
4. Six super-bright LEDs (continuous
illumination or flashing mode)
Flip-up design (measures
5" tall x 51/2" wide x 1.0" thick)
Magnetic base to place
on the trunk or the hood
Strong, durable construction; splashproof
Triangle Emergency Flashing Signals Attaches to a vehicle that’s alongside a road or highway during an emergency
5. Measures 3.5" diameter x 1" thick
Splashproof; strong, durable construction—
withstands impact if a vehicle drives over it
Three super-bright LEDs (continuous
illumination or flashing mode)
Round Emergency Flashing Signals Place on the ground alongside a road or highway during an emergency
6. Comfortable, ergonomic
nonslip grip fits nicely in
the palm
TPE plunger boot
Nail-support
magnet
Drive-distance
adjustment sleeve
Magnet
Non-marring TPE
soft-touch foot Built-in magnetic nail-storage compartment.
Push ’n Hang Push-Hammer
™
Hangs pictures fast! No smashed fingers!
7. Includes 1/32 and 3/32 nail sets
3
/32 nail set
1
/32 nail set
Press to pop the nail set
from the handle
Magnetic nail starter Mini claw for tight spots
Nail set stores flush—
doesn’t interfere with grip
SPRING 2012
General/Finishing Hammer with Integrated Nail Set Storage
8. Vertical/horizontal bubble levels
Belt clip
Scriber mount magnetic pocket
ABS construction
Multi-scriber support holds:
• Carpenter’s pencil
• Standard No. 2 pencil
• Grease pencil
• Utility knife blades
• Tungsten Carbide scribing tool
• Felt-tip pen
Adjustable-fit slider
SPRING 2012 Surface mount with 360˚ swivel
ProScriber Arc Marking Tool
™
Quickly and easily marks perfect curves of any size
9. Multi-bubble level alignment
(0˚; 45˚; 90˚)
Snap-fit interlocking connectors
Works as multi-axis level
Works as multi-axis square
SPRING 2012
Combination Level and Square Multi-purpose interlocking tool
10. Easy-to-read altimeter-style
Extruded aluminum frame level indicator
Retractable bungee straps
and fastening clips keep
SPRING 2012 it securely mounted to
an object, for convenient,
hands-free use
Hi-Viz Level The hands-free, easy-to-read level instrument
11. Extruded aluminum frame
Aluminum: It can be configured
for 12-, 24- and 36-inch designs
Removable single magnetic level: It can be
configured for 12-, 24- and 36-inch designs
Trio level version: 0-, 45- and 90-degree indicators
Extra-large, single magnetic level
SPRING 2012
Hi-Viz Level Series Various styles of hands-free, easy-to-read level instruments
12. Thumb stop/lock
Durable steel-forged
surface for hammering
Tape measure
Molded palm-fit
rubber grips
Carabiner clip
SPRING 2012
Measure & Hang Combination tape measure and hammer all in one—perfect for indoor and outdoor projects!
13. Slide-hammer
Slide the hammer forcefully
in order to jam the pry bar
into the tight spot
Hammer also serves as an ergo-grip
Cast steel
Forged steel tempered blade
SPRING 2012
HammerBar Sliding hammer-assist helps get a pry bar into tight spots
14. Cord Lock in open position Dual openings for
cord to pass through
Ideal for locking an exposed engine block heater
to an extension cord. Use a padlock (not included)
to keep the Cord Lock firmly closed.
Center pivot
Locks a cord around a post to help prevent theft—
Opening for a padlock perfect for protecting construction equipment that
(prevents from pivoting open) must be left unattended.
Cord Lock ™
Helps prevent cord theft; also keeps power tools from “walking away”!
15. Semi-flexible thumb
support for better leverage
and improved comfort
8" Long Nose
Design adaptable to:
8" Linesman (not shown)
8" Slip Joint
Bent Diagonal
Long Nose Cutting Lineman’s
Precise, nonslip operation
due to soft, contoured
Multiple custom-color variations available finger gel pads
Ergonomic inside grip with
soft gel material for greater
Available in open stock or custom sets control and comfort
Double-Grip Pliers ™
Extra inside handle doubles grip & control
16. #45 heat-treated carbon
steel with micro-nickel or
black-nickel finish
5" Bent Long Nose
Ergonomic, wishbone-style inside
grip with soft gel material for greater
51/4" Bent Long Nose control and comfort
41/4" End Cutter
51/2" Flat Nose
4" Wire Cutter
Soft, contoured finger
gel pads for secure,
Rubber hinged clasp for
nonslip operation
holding tool closed when
not in use
Available in open stock or custom sets
Double-Grip Precision Pliers
™
Extra inside handle doubles grip & control
17. Drop-forged, heat-treated carbon
steel with micro-nickel finish
8" Long Nose
All-weather, nonslip
urethane-foam grips
Ergonomic inside grip
Thumb support
8" Slip Joint
Available in open stock or custom sets
Stretch-Grip Pliers ™
Precise control like no other!
18. 4" Bent Nose
Drop-forged, heat-treated carbon
steel with micro-nickel finish
4" Long Nose
All-weather, nonslip
urethane-foam grips
4" Flat Nose
Ergonomic, wishbone-
style inside grip
4" Wire Cutter
Available in open stock or custom sets
Stretch-Grip Precision Pliers
™
Precise control like no other!
19. Socket-head adapter
fits on either side
Socket-head selector
Sure-grip TPE handle
Includes ratchet.
Multiple socket heads—each
size is a solid 6-point socket:
3
/8" 5
/16"
1
/2" 7
/16"
5
/8" 9
/16"
3
/4" 11
/16"
7
/8" 13
/16"
Select-a-Socket Multi-Wrench
™
10 sockets in 1 tough tool
20. Ratcheting socket
Tightening/loosening
indicator arrow
Wrench-assist hex nut
Removable shank
SPRING 2012
Ratcheting Nut Driver Set Speeds up fastening or adds greater torque when driving a nut
21. Socket receiver
Ratchet receiver
Right-angle extension-ratchet drive
Enables user to get at fasteners that are unable
to be reached by conventional ratchets
Dual purpose: works as regular extended handle Ratchet
ratchet when not using the offset drive
SPRING 2012
Offset Drive Ratchet Easily removes fasteners from awkward, hard-to-reach spots
22. Angled, spring-loaded jaw tips allow the user
to quickly push the jaws over the fastener
Rachet-like effect for quickly removing
or tightening hex-head fasteners
Loop grip provides greater
range of leverage; allows better
hold—with minimal effort Jaw removes any slack
Lever arm instantly
cinches jaws tightly
SPRING 2012
Autosizing Adjustable Wrench Spring-loaded jaw tips quickly and securely fit around any fastener
23. Set of 3:
6" 8" 10"
Sliding extension
Folded
Fully extended
SPRING 2012
Rubber handle grip
Compact Foldout Wrench Conveniently folds up for easy storage and portability
24. Pivoting handle grip
Foot pedal
Insert the mop (not included)
between the built-in rollers. . .
2-gallon capacity
. . .then step on the foot
pedal to wring out the mop.
Durable LDPE construction
Bucket Wringer ®
Keeps hands away from dirty mop water and harsh chemicals
25. 3
/4" male connector
Twist-lock battery cover
(CR2032 coin cell)
Connects between hose and spray-nozzle.
Press and hold to reset cumulative total.
Also used to switch between gallons and
LCD displays gallons or liters before each use.
liters to 1/10 (0.0 to 999.9)
Free-spinning 3/4"
female connector
Water Saver ™
Measures use to conserve water
26. Impeller sensor easily mounts
to a standard 1/2-inch connector
Soft-touch buttons
(set; input)
1:1 image
Flexible multi-position
gooseneck design • Measures and displays in gallons or liters
• Usage-limit alert
• Time/timer
• Temperature (˚F/˚C)
Different LCD screens:
Time and Flow and Temperature and
flow volume timer flow volume
Soft rubberized bezel 1:2 image
Water Saver Shower Usage Meter
™
A gauge to gauge how much water you’re using, how long you’re taking
27. Standard 3/4-inch Easy-grip
quick-connect twist valves
Tubing connectors
8-inch anchor
stake for hub
6-inch
sprinkler
50 feet of 1/4-inch
nozzle
polyethylene tubing
(cut to fit)
SPRING 2012
AquaHub Watering & Conservation Device
™
Waters six areas using one faucet
28. Nonslip, ergonomic
rotating handle grips
Cutting blades Telescoping handles
Pivot point
FALL 2011 Secure-lock for adjustable handles
Ergo Clippers Innovative hedge clippers with new ergonomic handle design provides better comfort and improved trimming consistency
29. UV-resistant plastic
3
/8-inch-thick ring
12" tall 12" diameter
Hydration control well
Erosion control wall
FALL 2011
Garden Ring Ensures that plants retain the amount of water given, while strengthening the root system to help minimize erosion
30. Seal-tight gasket
1.2-liter water bottle
Spill-control spout
Tree branch
hanger support
16-unit PDQ
floor display
Easy two-part
assembly
Total height: 36"
Hydrostatic Equilibrium
As the water level drops in the tree-stand reservoir,
the TreeEZwater outlet is exposed. This allows air to
Standard 6-foot tree.
travel up the tube and into the bottle. The water in the
Maintains 2-inch bottle is displaced and sent down into the tree-stand
water level reservoir until the outlet is underwater again.
The Original TreeEZwater Self-Watering System
®
Finally a way to water your tree standing up!
31. Tree branch hanger support
Easy two-part assembly
Total height: 32"
Maintains 2-inch water level
Standard 6-foot tree.
The Original TreeEZwater System ®
Finally a way to water your tree standing up!
32. Hinged arms
1 2 3
Large Earth Anchor
holding umbrella.
Large
4 5 6
Instructions:
1. Turn the threaded ring clockwise until the
hinged arms are able to flip down so they’re
perpendicular to the ground; insert the tip of Latch levers
the threaded anchor into the ground.
2. Hold the two hinged arms and screw the
threaded anchor into the ground until it
reaches the top of the thread. (Do not drive
the anchor into the ground using a hammer Small
or similar tool or object.)
Threaded ring
3. Insert the desired pole or post (outdoor
umbrella for example) into the top opening
on the Earth Anchor.
4. Fold up the two hinged arms so they grip the
pole or post.
5. Tighten the threaded ring counterclockwise
to securely fasten the hinged arms to the
pole or post. Hinged arms
6. Flip down the latch levers to securely grip
and hold the object (umbrella) in position. Small Earth Anchor
holding net post.
Threaded anchor screw
Earth Anchor Install and hold outdoor poles and posts into the ground—without using concrete or machinery!
33. Safety rest
On/off dial with
Stainless-steel heating variable heat settings
element with Teflon®-
molded supports for
unclogged solder distrbution
Heat-resistant
ABS housing
Infrared auto-shutoff
sensor in handgrip
Also available in a Standard version,
without variable-heat selection and
auto-shutoff feature.
Solder spool (2 oz.) included;
also sold separately
Trigger-operated
solder feed
Deluxe Self-Feed Soldering Gun
™
One-handed heat and solder application
34. Spring-loaded
socket-retention cam
Socket-release button
Optional standard
impact-grade
socket
Conventional
hog-ring anvil
Pneumatic coupler
Quick-release
safety anvil Hog ring
Red Mirror Effect Black Nickel
Quick-Release Impact Wrench Socket Tool ™
Safety and convenience—without compromise