molding CERAMICA EXPERIMENTAL

1. FAB ACADEMY 2012
WALTER GONZALES ARNAO
MOLDING, CASTING AND COMPOSITES
(MAR 7)

2. SUMMARY
THE JOB IS TO MAKE A 40X30 40X PART IN A MECHANICAL WAX
MOLD, USING THE MACHINE ROLAND

3. FIRST JOB IN THE SOFTWARE IS DRAWING TO DEFINE THE
GEOMETRY OF THE PIECE

4. STEP TWO. INTRODUCED THE SAVE THE FILE TO STL Open it THEN
THE SOFTWARE THAT MADE LAQUINA MACHINING WITH STRAWBERRY
3mm FLAT

5. STEP THREE. IS THE SIMULATION SOFTWARE IN THE MACHINE TO SEE
THE PATH OF THE STRAWBERRY IN THE WAX ​PEZA machinable

6. STEP FOUR. STANDING IN THE STRAWBERRY 3mm MACHINE TO
PROCEED TO MACHINING

7. STEP FIVE. PULLS THE PART OF THE ROUTER PAR WAX
PROCEED TO REMOVE THE WAX ​TO LET TAILINGS CLEAN

8. STEP SIX. APPLICANTS ARE TO FIT THE MOLD Mescla FLEXIBLE

9. step seven, we proceed to give the flexible part assembly that
will be the mode

10. step eight, the flexible mold is prepared to fill it with white
cement

11. Step nine, white cement is placed and then is expected to
disassemble

12. step ten, is corrected by removing faults early, mold

13. step eleven, final part

14. end