The document provides instructions for recutting a smart glass film after the busbar has already been installed. It advises opening the tape and copper slightly to expose the extra film without cutting the installed busbar. The extra film should then be cut away and the tape and copper reinstalled. Smart glass film is composed of two transparent conductive films laminated around a polymer liquid crystal core that allows the film to appear transparent or translucent depending on whether electricity is applied.
Call Girls Electronic City Just Call 👗 7737669865 👗 Top Class Call Girl Servi...
Re-Cut Size of Smart Glass Film After Busbar Installed
1. Re-Cut Size of Smart Glass Film After Busbar Installed
Re-
BY PETER SHIN LIN WWW.CNCNEXT.COM WWW.HELLOGLASS.COM
It's better if you don't put yourself in this situation, so please double make sure that you have
correct size of the smart glass film you need before the busbar is installed
Open the tape slightly
Open the tape slightly
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
2. Open the tape slightly
Open the copper slightly
Open the copper slightly
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
3. Open the copper slightly
Cut the extra size smart glass film without
cuting the copper
Reinstall the copper
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
4. Reinstall the copper
Reinstall the tape
SMART GLASS FILM is composed by two transparent conductive film laminating with a
polymer liquid core. And the polymer liquid core composes crystal ball and polymer. When
the light pass through the SMART GLASS FILM and reach the liquid crystal ball and
polymer, the light is scattering. And the SMART GLASS FILM appears translucent.
When electricity power is connected, the polymer-liquid crystal core is allowing light pass
through, the SMART GLASS FILM appears transparent.
All rights reserved by CNC -INTERLAYER TECH:
CNC-
【1】CNC -Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
1 CNC Force®
CNC-
【2】CNC -Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
2 CNC Smart®
CNC-
【3】CNC -Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
3 CNC Shield®
CNC-
Web: www.CNCnext.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
All rights reserved by CNC INTERLAYER TECH www.cncnext.com