7. 10.21.1 SIM Tool Kit 79
10.21.2 Internet services 79
10.21.3 Data Account 80
10.22 Calculator 81
10.23 Tools 81
10.23.1 Unit converter 81
10.23.2 Currency Converter 82
10.24 Bluetooth 82
10.25 MSN 84
10.26 Facebook 84
10.27 Google 84
10.28 Chat 84
10.29 Cell Broadcast 85
10.30 Theme 85
10.31 Application 85
10.32 E-Book
11.0 Common Faults &
Troubleshooting 86
1. Legal Notice
All rights reserved. Reproduction, transfer, distribution
or storage of part or all of the contents in this
document in any form without the prior written
permission of TVC ICON is prohibited.
-- 7 --
8. TVC ICON operates on a policy of continuous
development. TVC ICON reserves the right to make
changes and improvements to any of the products
described in this document without prior notice.
Under no circumstances shall TVC ICON be
responsible for any loss of data or income or any
special, incidental, consequential or indirect damages
howsoever caused.
The contents of this document are provided "as it is".
Except as required by applicable law, no warranties of
any kind, either expressed or implied, including, but
not limited to, the implied warranties of merchantability
and fitness for a particular purpose, are made in
relation to the accuracy, reliability or contents of this
document. TVC ICON reserves the right to revise this
document or withdraw it at any time without prior
notice. The availability of particular products may vary
by region. Please check with TVC ICON Executive.
-- 8 --
9. 2. Getting Started
Inside the Box
The device package consists of:
Transceiver
Phone
Battery
Charger
USB Data cable
Hands free kit
User Manual
Warranty Card
PC Sync CD /Manual CD
-- 9 --
10. 3. Know your device
Dual SIM Card
Your phone support dual SIM cards, allowing you to
use two different phones numbers on one mobile
phone.
Dual mode
To enable the Dual SIM mode:
Press Main Menu > Settings > Dual SIM Settings and
press Dual SIM Active. However, if you wish to be
reachable only on one SIM, choose Only SIM1 Active
or Only SIM2 Active. To be able to use your handset
whilst in an aircraft, press Flight Mode to restrict the
device‟s capacity to place or receive calls or text
messages ; while still permitting use of other functions
that do not require signal transmission, such as
Camera,.
-- 10 --
11. 4. Basic knowledge
4.1 Introduction
Thank you for choosing Phone Full-Screen
Color-screen Mobile Phone. Through reading this
operation manual, you‟ll find out a full range of
functions and learn to operate the phone easily.
Phone Color-screen mobile phone is designed to
operate within GSM/GPRS : 850/900/1800/1900MHz
network. In addition to basic call functions, it also
provides associating intelligent Chinese/English input,
name-card contacts, 64 polyphonic ring tones, clock,
alarm clock, memorandum, unit conversion, health
control, calculator, game, Mp3 player,Mp4 player,
incoming call picture, Video Recorder , FM radio, and
Bluetooth etc, for the convenience of your work and
entertainment. The personalized interface and
multiple functions will meet different requirements.
Phone Color screen mobile phone is up to GSM
technology stand and it has received certificates from
foreign authorized institutions.
Our company keeps the right to make modifications to
any of the content here in this user guide without
-- 11 --
12. public announcement in advance.
4.2 Safety precautions
If your mobile phone is lost or stolen, inform the
telecom branch or its outlet immediately to forbid the
use of your mobile phone and SIM card, which will
help you to avoid the economic loss caused by other‟s
misuse of your mobile phone.
Please take precautionary measure to avoid abuse of
your mobile phone. Such as
·Set the PIN number of the SIM card,
·Set the phone code
4.3 Safety and health precautions
Safety warning
Please do not use the phone when you driving,
use the hands-free calling device unless in case
of emergency, and place the phone in the phone
seat
Switch off your phone before boarding an aircraft
Do not use your phone a high-temperature place
or use it in a place with flammable gas such as a
gas station.
Please follow relevant rules or regulations in
hospitals and health care facilities. Between the
phone and the pacemaker to maintain at least 6
inches (15cm) distance. Such equipment
information from manufacturer or doctor to use
-- 12 --
13. other medical equipment。
Any phones will be interfered by the radio waves
and affect the call quality
Only professionals can install or repair the phone.
Self-installing or repairing phone may be with
great danger, and contrary to the provisions of
the warranty.
Accessories and battery
Only use the accessories and battery which
approved by the factory
The reasonable use
Uses the handset in normal way.
Emergency call
Ensure your phone has been open and the power
is in the service status, enter the emergency call
number; make a call by dialing key
Attention:
Keep your phone and its accessories away from
children
Precipitation, humidity and liquids will corrode
electronic circuits.
Do not use the phone in dust place ,otherwise will
damages its active part
Do not use the phone with too high temperature,
otherwise the main board and the battery will be
damaged
Do not place the phone in too low temperature,
-- 13 --
14. otherwise the main board will be damaged
Please do not drop ,knock or over-squeezing the
phone, rough handling may cause damage to the
phone
4.4 Technical specifications
Phone: ICON G5
Dimensions (W×D×H): 115X55X9.8mm
Weight: 165g (package)
Lithium battery Rated capacity: Li-Ion 1000
mAh
Continuous standby duration:About 150~170
hrs (Relates to network status)
Continuous conversation duration:About 3~4
hrs (Relates to network status)
Please refer to their labels for other data related to
the battery and the charger.
5. Phone Layout
-- 14 --
15. Headset Menu
1 jack 6 Icons 11 Main Camera
Touch
2 Receiver 7 Panel 12 Flash Light
Front
3 Camera 8 Home Key 13 Back Cover
USB
4 Silent key 9 Interface 14 MIC
-- 15 --
16. Volume
5 Key 10 Power key
5.1 Keypad Definition &Other Definition
No Key Description
Insert the earphone to answer calls
1 Headset jack
and to listen to the music, and so on
Listen to the voice of the other side
2 Receiver
when calling.
With VGA front camera, In Camera
Front
3 mode, take a self photo or record a
Camera
video.
Press this key to directly go to
4 Camera key
Camera mode
Play / call volume keys to adjust the
5 Volume Keys status here, preview it for status by
flipping up and down rows
You can open an applications on
6 Menu Icons Phone by tapping its icon on the
Home screen.
-- 16 --
17. Your device‟s touch screen lets you
easily select items or perform
functions, To select an item or
7 Touch Panel button on the screen, touch the item
directly with your fingertip. You will
know when an item on the screen is
selected when its color changes
It‟s a key below the screen. You can
press this key to perform “return”
function. (Note: There
8 Home Key are three icons situated at the left
side of screen, you can access
camera, increase/or decrease
volume by pressing them.)
USB Connecting USB cable, charger or
9
interface insert the headset
It is situated at the top of the
phone. You can power on/off the
phone by long pressing this key or
10 Power Key
you can lock the keypad and screen
by short pressing it.
(Note: when you use this function to
-- 17 --
18. unlock the phone, there would be
tips display on the screen: Slide
unlock. And you can slide along the
direction of arrow to unlock the
phone.)
With 2 mp camera, In Camera
11 Main Camera mode, take a photo or record a
video.
Camera with Flash light, Flash light
12 Flashlight can be used as for clear pictures in
dim light
13 Back Cover Slide up to release Battery Cover
Listen to the voice to the other side
14 MIC
when calling.
Tap number keys 0 through 9 to
Number input numbers; or hold any of
keys, * key, number keys 2 through 9 for over
# key, dial two seconds in standby state to fast
key and dial the corresponding telephone
Cancel key number in the speed-dial number list
(need to set in advance).
Note: Holding number key 1 on
-- 18 --
19. standby will call the voice mailbox
service center. The voice mailbox
center number, however, must be
preset.
The # key and the * key represent
different functions in different states
or different function menus.
Hold the # key up to 2s in standby
state to activate or deactivate the
mute mode.
Press the # key in edit state to
switch between input methods.
Pressing the * key in edit status to
select a symbol.
Press and hold the * key up for 2s to
input "+" in standby interface. When
the symbol "+" appears, press the *
key quickly to input "P" or "W". "P"
and "W" are used for calling the
extension; "+" are used for dialing
an international call.
Note: The difference between
-- 19 --
20. characters "W" and "P" is that "P"
means pausing three seconds and
then sending the DTMF whereas a
window pops up after "W" inputting,
asking you whether to send the
DTMF.
Tap dial key to originate a call on
SIM1 or SIM2.
6. Before starting the phone
6.1 Insert SIM card
SIM card can save your phone
number ,PIN1 ,PIN2,PUK ,PUK2 and IMSI number
and network data ,phone book data and SMS data
Note:
·Please switch off you phone before you remove or
insert SIM card
·The plug-in SIM card and its contacts can be
easily damaged by scratching or bending
·Keep your phone and its accessories away from
children
-- 20 --
21. When registering mobile phone number, you will
obtain an SIM (Subscriber Identification Module)
card provided by the network service provider. If
you obtain the SIM card with the same size as
credit card, take out the small part and remove
the edges.
With this card, you can use various functions the
mobile phone has. All information in relation to
network connection is recorded in the chip of the
SIM card, including personal data, such as PIN
(Personal Identification Number) number,
phonebook, message and other extra services.
Use your SIM card carefully. Do not distort or
squeeze the SIM card; do not touch the metal
place; keep the SIM card far from
electromagnetic place; always keep the SIM card
touching dust and water. Once the SIM card is
broken, you will be unable to use the mobile
phone normally.
Notice: Make sure you turn off the phone before
getting the SIM card out. Inserting the SIM card or
getting it out with the power supply connected is
absolutely prohibited.
Install Your SIM Card
When you register your mobile phone numbers, you
can apply for two different numbers and two different
-- 21 --
22. network service providers, you will have two SIM
cards provided by network service providers (user
identification card)
With these two SIM cards, you can use various
functions of this mobile phone, store many
parameters needed for communication in SIM card
and store personal information, including PIN code
(personal identification code), telephone directory,
short message and other additional system service.
Note: This phone support dual SIM card,SIM1 is
master,SIM2 is slave.
Warning:Do not distort or score on your SIM cards; do
not contact it with static, dust or water. If your SIM
card is lost, please contact your network operator
immediately for assistance.
Please turn off your mobile phone before installing
SIM card; SIM card is installed in the back of the
phone.
Please install main SIM card into SIM1 card socket,
install subsidiary SIM card into SIM2 card socket.
Note: SIM card is tiny object; please do not make it
available to children, so as to prevent from being
swallowed by children!
6.2 Use the code
Your phone and the SIM card have many codes.
These codes are helpful in prevented your mobile
phone and the SIM card are embezzled. When your
-- 22 --
23. phone needs the code, please press “ok” soft key. If
inputs wrong code, please press del key to delete and
input right code. You can go into the using menu
“setting -> Security setup->change code” to change
the PIN code, PIN2 code and phone lock
6.2.1 Phone code
Phone code is like phone lock .phone password, Used
to prevent your phone be stolen. Passwords are
usually associated with phones with phones provided
by the manufacturers. Phone factory preset password
is 1122, 1234 or 0000. If the phone has been
unlocked, the boot will be asked to enter the
password
6.2.2 PIN code
The network supplier will set a standard PIN (between
4 to 8 digitals) for your SIM card, You will get the PIN
code on same time when you obtains the SIM card
from the network supplier If activated the PIN test
function, then you need input the PIN code when you
switch on the phone, If you input wrong PIN code
three times, the SIM card will be locked, unlock
methods:
According to the screen prompts to input the correct
PUK code to unlock the SIM card
Input the new PIN code and press the “ok” soft key
Input again the new PIN code press ok soft key by the
prompts
-- 23 --
24. The SIM card will be unlocked if the PUK code is right,
the PIN code will be Re-instated.
Warning:the SIM card will be locked if you input
wrong PIN code three times, please use the PUK
code which provide by network supplier to unlocking
the phone.
6.2.3 PUK code
PUK code (PIN unlocking password , numbers )
8
used to unlocking the PIN code ,you will get PUK
code same time with SIM card from network supplier ,
if you input wrong PUK code 10 times , the SIM card
is invalid, you will must associated with the network
supplier to replace a new card.
6.2.4PIN 2 code
PIN2 code (4-8 numbers) provided with the SIM card,
use for the setting "fixed dial-up" features. Please
connect with network supplier, to determine whether
your SIM card supports these features, if you input
wrong PIN2 code three times , the PIN2 code will be
locked , please input the PUK2 code to unlocking
Unlock methods:
1. According to the screen prompts to input the
correct PUK2 code to unlock the PIN2 code
2. Input the new PIN2 code and press the “ok” soft
key
3. Input again the new PIN2 code press ok soft
key by the prompts
-- 24 --
25. 6.2.5 PUK 2 code
PUK2 code (PIN2 code password, numbers)8 used
to unlocking PIN2 code 。 PUK2 provided with the SIM
card from network supplier. Please contact with
network supplier if you don‟t have , if you input wrong
PUK2 code 10 times , the PIN code will be invalid,
please associated with the network supplier to replace
a new card
6.2.6 Prohibited Password
Used to prohibit password, when you use Restrictions
of function call, you will obtain the password from the
network supplier
6.3 Insert T flash card
Because the mobile phone is not provided with
adequate memories, memory card is required for use
of some functions (this phone uses T-FLASH card).
6.3.1 Install T-FLASH Card:
Open the snap close of T-FLASH card, insert
T-FLASH card into T-FLASH card jack, close up the
snap close, the installation is complete.
6.3.2 Uninstall T-FLASH Card:
Open the snap close of T-FLASH card, press the card
inward slightly, T-FLASH will eject out; close up the
snap close, uninstalling is complete.
Note: 1.T-FLASH card is tiny object; please do not
make it available to children, so as to prevent from
being swallowed by children!.
-- 25 --
26. 2. the phone cannot read the T-Flash card if you
insert card when power on, please switch off and
switch on the phone again
6.4 Battery
This mobile phone use rechargeable battery. The
new battery cannot have optimal performance until it
has 2-3 complete charges and discharges (at least
14-16h but no more than 24h). It is recommended to
charge the battery until the battery is empty and the
mobile phone switches off automatically.
6.4.1 Install the Battery
1. Align the metal of the battery to the battery contact
on the mobile phone and insert the battery in at 45°
angle.
2. Press down the battery until its four sides are level.
4. Restore the back cover of the mobile phone.
6.4.2 Take out the Battery
1. Make sure that the mobile phone is off and the
charger and any other device related are removed
from the mobile phone.
2. Keep the mobile phone back upward and press
down the back cover lock to take out the back cover.
3. Look for the release button on the back of the
battery and lift the battery upward to take out the
battery.
-- 26 --
27. 6.4.3 Battery level indicator
1.Your mobile phone can monitor and display
information about the battery.
2.In the normal circumstances, you can know the left
battery capacity from the battery icon displayed on the
upper right corner of the screen.
3.When the battery is too low, “low battery” will show
on the screen, also issued a warning alert tone if you
choose alert tone in any mode- a warning tone by
profile setup
4.When you charging, the battery icon will change
until the battery is full
In order to enable the battery to achieve the
optimum performance, please observe following
rule:
Only use the approved batteries and charger.
Avoid any hurt because of wrong charging.
Please switch off the phone before you remove
the battery
Charging the battery until full if it is new battery or
not use for long time. If the battery is too low and
can‟t switch on the phone, the battery icon only
will be able to change after charging a long time.
Keep the battery at room temperature or near
room temperature when charging
Do not use the battery if there‟s any smell or
overheating during charging, using or storing, or
-- 27 --
28. the batteries is discolored or deformed
Note: For your safety and environment, do not
discarded the battery anywhere
Warning: Any forms battery short circuit has the
possibility to create explodes, the fire or the person
injury
6.5 Travel charger
Insert the battery to the phone before you
charging the battery
connect the travel charger adapter and handset
charge slot; Certainly must guarantee inserts well
Connect the travel charger to the plug
It is normal phenomenon that the battery getting
a little heat when you charging
When finish charging, the icon of battery will stop
change
Note :
Please ensure the charge plug, USB plug is in
right plugging directions, otherwise it can‟t be
charged or cause some other troubles.
Must ensure the voltage and power of your
charger match the local standard frequency and
voltage.
6.6 USB Cable
Connect one end of the USB cable into the USB
port on the computer (desktop or laptop).
-- 28 --
29. Connect the other end of the USB cable into the
the USB port on the top of the mobile phone.
The connection of USB can have two functions,
i.e. download and charging.
When connecting the mobile phone and the
computer with USB cable, in switch-on state,
“Storage unit, network camera and serial
interface” will occur on the LCD screen.
7. Basic Operation
7.1 Switch on
In normal case, press the Power Key to power the
mobile phone on.
If the mobile phone does not set with password or
the SIM card does not set with password protection,
then the mobile phone will automatically search
network. After the mobile phone is registered in the
network desired, the name of the network will occur
in the screen. In such case, you can receive or dial a
call.
-- 29 --
30. If the mobile phone is set with switch-on password,
then the screen will hint you to input the switch-on
password. The mobile phone cannot be switched on
until the correct password is input
7.2 Switch off
To switch off the mobile phone, in standby state,
press the Power Key long. When the screen
displays switch-on cartoon, the mobile phone is
switched off. Never switch off the mobile phone
directly by removing the battery. If so, some
information not saved to the SIM card or mobile
phone will be loss.
number.
7.3Connect network
After the SIM card is unlocked, the mobile phone
searches for network service. Once connected, the
cellular service provider will show on the centre of the
screen. The mobile phone is at idle stage and can
make or receive a call
7.3.1 Dialing a call
You cannot use this function until the network
provider name occurs on the screen.
In standby mode, input phone number with the
touch, press the Dial Soft to dial out number.
Also, you can dial a call by choosing a number from
the Phonebook. In standby mode, press the
“Contacts” Soft Key to enter Phonebook, choose
-- 30 --
31. Quick Search. After finding the contact and its
phone number, press the Dial Soft Key to dial out.
You can dial a call via Messages. If the receive
message contains phone number, you can dial such
phone number via inbox message or send message
to such message sender.
In Inbox, choose the desired message, press the
“OK” Soft Key to enter Options, choose Use Number
to extract the numbers or sender number contained
in the message. Press Options again to choose Dial
or Save the extracted number.
When the cal is connected, you can set Call
Duration as on, then the screen will display call
timer.
After the call is connected, press the “H-Free” Soft
Key to enter the handfree state. When the hand-free
function is activated, please keep the mobile phone
away from you ear, because the amplified sound
may damage your audition. Press the “H-Held” Soft
Key to turn off the handfree function and return the
normal mode.
If the call cannot be connected, the possible
reasons include:
“Busy Line”: It means that the called party is
busy or the network is busy. If automatic redial
function is set, then the mobile phone will
automatically redial.
-- 31 --
32. “Refused”: It means that the call is refused,
for example, call restriction function is set.
If Auto Redial is set as On, when the called party is
busy or there is no answer, automatic redial will be
implemented.
If the dialed number has been stored, then the name
corresponding to this phone number will be
displayed on the screen.
Press Hang-up Soft Key to end the call. In such
case, the screen will display the call duration.
Press Hang-up Soft Key to cancel the current call.
7.3.2Emergency Call
Emergency calls can be dialed even if the mobile
phone is locked or the SIM card is not inserted (You
must be in the area covered by the network).
Different countries have different emergency call
numbers, so the emergency calls in your mobile
phone may not be effective in all areas. Sometimes,
due to the effect from network, environment or
interference, you cannot dial the emergency calls.
“112” is a common GSM emergency call, so it can
be effective under any GSM network.
7.3.3 International call
To dial an international call, please use “+” to
replace “00”. You can press “*” character to input
“+”.
Input country code.
-- 32 --
33. Input area code and phone number.
Like common international call, please omit “0” before
area code.
Note: In some regions in a country, the call between
them is like international call (such as the Mainland
China and Hong Kong SAR).
7.3.4Dial a Latest Call
Whether the call is connected or not, the mobile
phone will save the latest inward and outward call
list, which is ordered from new to old. After the new
number is saved, if the list is full, the oldest number
will be deleted.
In standby state, press the Dial Soft Key to display
the latest number. Choose the desired number and
press the Dial Soft Key to dial out.
7.3.5 Fixed line and extension
After input the operator number, press * three or four
times, input “p” or “w”, input the extension telephone
number and press the call key again.
1) Use phone book to save number and dial a call
Go into the phone book, use the up and down Key to
search the number which you want to dial. Press call
key to dial a call
2) Redial the last number
On standby mode, press dialing key, will list the
dialing number, use direction key to choose the
number and make a call
-- 33 --
34. 7.3.6Adjust Volume of Receiver
In the process of session, you can press volume
adjusting key on the phone to adjust
7.3.7 Receive a Call
When there is a call in, as per phone settings, it will
be alerted by means of Ring, Vibration, Vibration
and Ring, Ring after Vibration together with Cal
Image and Call Movie.
Press the Dial Soft Key to receive a call.
Press Hang-up Soft Key to refuse a call.
If you have opened “Call Display” service, during
call, the caller‟s number will be displayed on the
screen. If this number has been stored in
phonebook, the name corresponding to this name
will be displayed on the screen.
Press Hang-up Soft Key to end the call.
7.3.8 Rapid dial-up or Speed dial
This mobile phone provides 9 shortcut key. You can
self-define the telephone numbers corresponding to
these keys (see “telephone directory” for detailed
description). Only when you press any key from [2-9]
keys under power saving state, you can rapidly dial out;
-- 34 --
35. [1] key is set as rapid dial-up of voice mail box number.
After set up voice mail box number, this key will be
available.
Notice: key of rapid dial-up must be pressed for over 2
seconds. If you press shortcut key and have not
defined in setup/mobile phone setup/rapid dial-up, it is
hard to dial out.
7.3.9 Missed Calls
When there is a missed call, the will be “Missed call”
occurring on the screen. Press View to enter the list
to view such missed call.
If Call Transfer option in Call Settings under
Settings is chosen, the call inward will be
transferred to the specified phone number.
7.3.10Connection to Voice Mail
This mobile phone allows you to transfer incoming
telephone cal to voice mail, then you will receive a
notice on voice message. (Voice mail center number
must be preset).
7.3.11 Additional Functions during Call
During call, press “Option” Soft Key to enter all
options. With these options, you can pause (restore)
call, end call, open a new call, open phonebook,
enter message menu, audio record, silence, close
(open) DTMF
Options Descriptions
Mute Mute the current conversation
-- 35 --
36. After the opening, You will see
the call menu where you can
Dial Panel dial a new number. Also you
call dial number from call
history and phonebook also
Loudspeaker option put a call
Loudspeaker on loudspeaker mode
You can add numbers/Call by
Add Call
selecting this option.
You can put call on hold by
Hold
using this option
This menu automatically
Phonebook
redirected to Phonebook menu
7.4 Touch screen
Tap the icon to instantly open any response
procedures, as shown
-- 36 --
37. You can be up or down or down to scroll drag to
achieve, in some similar screen so you can drag, as
shown in Figure
Browse photos, you can zoom in or out. Expand on
the screen or close the two fingers to zoom in or
pictures. Figure:
7.5 Motion sensor
-- 37 --
38. A major feature of the phone function is to set up a
motion sensor, and in some areas of new technology
to achieve a major breakthrough, you can easily use
the motion sensor shake for standby picture, pictures,
and some of the menu interface to achieve rotation.
7.6 Standby mode
When the phone is ready, and you have not entered
any characters,
mobile phone is in standby mode.
-- 38 --
39. 8. Phone Icons
8.1 Main menus Icons
Main menu is divided into three pages, you can flip
the screen sliding menu. The following table lists the
main menu features the usual
Main Functions
menus
Dia or answer a call.
In standby mode, press this key to
Phone
browse call record list.
In this menu, you can create and edit
new messages.
Message
Built-in music broadcasting machine,
Music classified according to different
albums, Wang Ping can realize a
variety of playback effects.
Stored in the "my music" folder of
Photos pictures can browse, automatic
playback can also be manually Zoom
Effects
-- 39 --
40. Service is SIM card kit. This mobile
phone supports service function, is
provided with menu item determined
by SIM card and network. When
network provides service business
Services and your SIM card supports service
functions, service menu will auto add
it to mobile services.
Play AVI MP4 3GP video formats,
Video support for Bluetooth mode
This menu you can check your status
Call and call in the near future to set the
call.
Center
With a camera phone, video and
camera other functions, this directly into the
camera menu interface
Click here to enter the phone menu
fast record, according to a dial-up
Phoneboo contacts, send text messages, view,
edit and delete functions
k
With this function, you can have
simple calculations with the mobile
phone.
Calculator
-- 40 --
41. Open the Bluetooth mode, can make
calls via Bluetooth, MP3, MP4 to
answer
Bluetooth
Adjust all Phone settings in one
convenient place. Calibrate the touch
screen. Set your ringtone,
Setting
wallpaper,screen brightness,and
settings for network,phone,call,and
more. Set auto-lock and a passcode
for security.
Email This function refers to E-mail client
end software
Radio Select “FM Radio” will open the FM
tuner
This menu into record a sound
Recorder
Clock Includes World
Clock,Alarm,Stopwatch
Note:Customize main menu
You can customize the layout of the icons on the
screen (except at the bottom of the screen icon in the
Dock)
Rearrange icon:
-- 41 --
42. 1. Touch and hold the icon on the screen until the icon
to start swinging
2. Drag the icon, through to order
3. The main screen and press the bottom of the
"middle button" to the
storage array
4. To restore
the default icon, please order the resumption of
mobile phone
8.2 Screen Icons
-- 42 --
43. Indicator icons provide information such as battery
level, network signal strength, current date & time and
so forth.
Icons Descriptions
Show strength of network signal
GPRS service is available
Show the battery level of the phone
Silent
Vibrate and ring
Ringing
Vibrate then ring
Vibrate Only
Earphone was inserted
SIM1 Unread text messages
SIM1 Unread MMS
Bluetooth has been activated
Alarm has been activated
Keypad lock is activated
Indicates Missed calls
Indicating that there is service message
not read
-- 43 --
44. 9.0 Input method
It supports normal English input method, smart
English input method,
number input method, Hindi input method, and
symbols input method.
9.1 Hand-writing input
Hand-writing input mode is the important mode of this
mobile phone. As this mobile phone adopts advanced
word identification technology, you can conveniently
and quickly input English and number in the screen by
hand writing. It is applicable for any function requiring
word and number input.
In English input mode, click to switch between
lowercase and highercase;
Click or to eject or hide the analogue keyboard;
Click 》 to switch between input mode and symbol
input;
Click to input blank in the place where the
cursor is flashing;
Click to delete the character before the cursor;
Click to make the cursor come to a new line.
Before hand-writing input, confirm the type of the
words to be input. Click the English icon and number
icon in the screen to confirm the type of the words to
be input. The cursor will mark the current input
position. Use the touch to write in the hand-writing
-- 44 --
45. area, after a halt, the screen will display the English
characters automatically identified and all candidate
English characters in the selection area. If the desired
word does not occur in the screen, click the candidate
area to choose a substitute.
9.2 Basic letter Input method icon
This mobile phone provides highercase and
lowercase input modes. Click and select the “abc”
icon, the screen will display the number input
analogue keyboard . You can press letter key to input
corresponding letter with the touch pen. Press “ABC”
to switch to Highercase Input method
After go into the edit window (include phonebook edit,
message edit, memorandum ;) input method icon
show up :
Number input :“123”
Multitap ABC input :“ABC”
Multitap abc input :“abc”
Hindi input : “Hindi”
Arabic input : “Arabic”
9.3Number Input
Click and select the number icon, and then the screen
will display the number input analogue keyboard, You
can press number key to input corresponding number
with the touch pen.
-- 45 --
46. 9.4Sign input method
Press“》”key to switch to sign input method, press left
right upper lower direction keys to select the sign
needed.
9.5 General operation for English input
Every key has its corresponding letter, repeat until
the letter you are looking for shows up. After the
cursor moved, input next letter.
Use a key to switch between different input
method
Press SPACE key to input space
Use DEL to clear off wrong input
10. Function Menu
Main Menu Structure
The main menu of the mobile phone consists of
Message Management (Contacts, Messages,
Calls, Alarm Clock and Audio Record),
Multimedia (Music Play, Video Play, Camera,
Video Recorder,), Entertainment (Games,
Services, Tasks and Notes) and System Settings
(Phone Settings, Call Settings, File Management,
-- 46 --
47. Profiles, Security Settings and Shortcuts), etc.
10.1 Contacts
This mobile phone provides two memory
carriers, i.e. SIM card and phone.
This mobile phone supports business card type
phonebook, i.e. you can save Name, Mobile
Number, Home Number, Company name, E-mail,
office number Number, Fax number, caller Ring
and Caller Group etc of the contact with phonebook
function.
You can only input Name and Phone Number into
the phonebook on the SIM card.
In standby state, press the “Contacts” Soft Key to
directly enter and view the phonebook interface.
After entering Phonebook from Menu, you can
choose QuickSearch, Search Name, Add Number,
Copy All, Delete, Callers’ Group, Other Numbers,
Settings, Call Ring and Call pictures etc.
10.1.1 Quick search
You can browse all contacts in the phonebook or
input related information to quick search the desired
contact.
The small icon on the left of the phonebook
indicates the contact is saved on SIM card or the
mobile phone and the name of such contact is on
-- 47 --
48. the right.
In name list and in Pinyin input mode, you can
quickly search the desired contact by press the
initial letter of such contact is. For example, to
search the contact of Lily, press the letter “L”, then
the current selection bar in the list will automatically
roll to the first contact beginning with the letter “I”
After the desired contact is chosen, press the Dial
Soft Key to dial it out or press the “Option” Soft
Key to have the following operations .
Options Descriptions
Call Press call to connect the call
Send text You can send the text message
message by using these function
Send
You can send the Mutimedia
multimedia
message by using these function
message
View the details of such contact.
These details will not be displays
View unless the phone number is
saved on the mobile phone and
the related options are chosen.
You can edit the options
Edit contained in a contact on the
phonebook.
Delete Delete such contact.
-- 48 --
49. You can copy contacts on the
Backup current memory and move them
to another memory.
You can move the contacts on the
Move current memory onto another
memory.
You can copy the contacts on the
Copy
current memory.
You can send or save a business
Send VCard card by means of SMS, MMS,
and Email and Via Bluetooth.
10.1.2 Search Contact
Input the name you need, enter the surname of name
or input the first letter of name you need, Press
“option” soft key, choose “searching”, press “ok” soft
key to search for it in the phone book till you get the
best result, press call key to dial a call
10.1.3 Add new Contact
You can add a new entry to phone, SIM card. Make
sure the card is inserted in your phone when you want
to store entries in card:
To SIM 1: Under one entry you can input the
information: name, phone number
To SIM 2 : Under one entry you can input the
information: name, phone number
To the phone:Under one entry you can input the
information: name, phone number, home number,
-- 49 --
50. company name, E-mail, office number, fix number,
birthday, picture, and sound and caller group
10.1.4 Copy All
You can copy all phone numbers on the SIM card to
the mobile phone or vice versa
10.1.5 Delete
You can choose to delete all contacts on the SIM
card or on the mobile phone or delete them one by
one. If Delete All is chosen and PIN number or
phone password is set, you must input correct
number to have the operation.
10.1.6 Caller groups
This mobile phone supports 5 callers‟ groups. You can
choose a group in the callers‟ group list and view and
edit callers‟ group, including Name, Chord Ring, Call
Big-head Portrait, Call Movie and Group Number.
10.1.7 Extra numbers
Under this menu, you can set My Number, Service
Number and Emergency Call.
Options Descriptions
You can at most edit and set two
Owner Number
groups of owner numbers.
It needs the support from the SIM
Service Dialing
card. At present, this service can
Number
be effective in Europe only.
-- 50 --
51. You can dial these calls even if
Emergency
the SIM card is not inserted or the
Calls
network service is not available.
10.1.8 Phonebook Setting
You will have the options of Memory Status,
Preferred Storage, Fields,Business Card
Settings and My VCard.
Options Descriptions
You can view the storage capacity
Memory and the used space of the
Status phonebook of the phone and the
SIM card.
You can set the default storage
Preferred
position or choose one during
Storage
saving.
You can set whether to display
Home Number, Company name,
E-mail, Office Number, Fax,
Fields
Callers pictures,Caller ringtone,
Callers’ Group etc in the
phonebook.
After setting your business card,
My VCard
you can send it to others.
-- 51 --
52. 10.2 Phone Calls
Making a call on Phone is as simple as tapping a
name and number in your contacts, tapping one of
your favorites, or tapping a recent call to return it.
Making Calls
Buttons at the bottom of the Phone screen give you
quick access to your favorites, recent calls, your
contacts, and a numeric keypad for dialing
manually.
Option Description
Contacts Tap Contacts, choose a
contact, then tap a phone
number.
favorites Tap Favorites, then choose a
contact.
-- 52 --
53. recent calls Tap Recents, then tap a name
or number in the list. If the call
was a FaceTime video call
(indicated by ), tap the item to
make a new video call.
Keypad Tap Keypad, enter the number,
then tap Call.
10.3 Music Player
This mobile phone has an inbuilt music player,
which is used to play music in "My music" folder and
set music as ring
Note: Local support for the motion detection function,
MP3 player, as long as you can shake a switch on
(the first of the next) songs
When enjoying music, choose proper volume.
Continuous high volume may damage your
audition.
In Music Player interface, Press icon to Play,
icon to Stop, Left Direction icon I to
Previous, Right Direction icon I to Next.
In the player interface, press the “option” Soft
Key to enter the track list, after entering
Options and then you can have such options as
-- 53 --
54. Play, Details, Add to Ring Base, refresh list and
Settings etc.
In Settings, you can have such options as
Player settings, Display settings, Sound
effects & Bluetooth settings
Options Descriptions
Pre play You can view track list from the
List mobile phone or the memory card.
When On is chosen, the mobile
phone will automatically check the
music files saved in the folder of the
Auto List music player and add them to the
track list. If the Off is chosen, you
can add music files under any
directory manually.
Lyric
You can display lyric.
Display
You can set to repeat playing music.
Repeat You can repeat the current music or
all music in the track list.
You can play the music in the track
Shuffle
list at random.
When it is set as On, the mobile
phone can still play music even in
Background
other operation interfaces (except
Play
the interfaces without sound or
camera operations).
-- 54 --
55. Sound
You can choose sound effect.
effect
When it is set as On, you can
Bluetooth
choose stereo headset to listen to
Settings
MP3 directly.
10.4 Message (Text)
On standby mode, press icons go into the
message. This mobile phone supports message
sending function. Messages are sent to the
message center of the network and then to the
target mobile phone. If the target mobile phone is
not switched off or cannot receive messages, the
message will be saved in the network temporarily.
The effective period to store the message is
determined by the settings of the user and the
service provider.
When there is a new message in, the screen will
have corresponding hint. Press the “Read” Soft
Key to read the message.
If the receiver has received the message,
then you can receive alert tone from the
mobile phone (Message Alert Tone and
Message Report must be set as on).
-- 55 --
56. If messages are full, you cannot receive any
new message. In Inbox, choose the desired
old message and use Delete to delete it.
Once the space allows, the message not
received will be received. Text message
function is a network service. You must
subscribe to your network operator.
Options Descriptions
This menu allows you to view the
received SMS.
Reply: Replay SMS to the sender.
Delete: Delete the current SMS.
Edit: Edit the current SMS.
Forward: Forward the SMS send to
Inbox others.
Copy to SIM card : You can copy this
SMS to SIM card.
Move to SIM card : You can move
this SMS to SIM card.
Delete all: Delete all SMS in the
Inbox.
-- 56 --
57. Copy all : Copy the message of
current location on SIM to phone or
phone to SIM.
Move all: Move the message of
current location on SIM to phone or
phone to SIM.
Use number: Extract all phone
numbers in this SMS
In this menu, you can view all unsent
Outbox
SMS saved.
In this menu, you can create and edit
new messages.
SIM1/2 Done: After the message is
edited, choose this function and then
Create a you can have such options as Send,
messages Save and Send, Save, Save to Many
and Send by Group.
Insert Templates: Insert preset
common templates into the short
message.
-- 57 --
58. Insert Object: You can insert Picture,
My Picture, Preset Cartoon, My
Cartoon, Ring, My Ring and Preset
Melody into the SMS.
Text format: You can set the size,
font, alignment and paragraph of the
SMS.
Insert Contact Number: After
entering Phonebook, you can insert
the target number into the editing
frame.
Insert Contact Name: After entering
Phonebook, you can insert the target
name into the editing frame.
Insert Bookmark: You can enter
Bookmark and insert the website into
the message editing frame.
Input Method: You can choose the
desired input mode.
The user can have such operations as
Templates
Edit or Delete on Templates.
-- 58 --
59. With this function, you can set the
default information in relation to SMS
characteristics.
Profile settings: In SMS Settings,
you can have such operations as
profile name, SMS center number,
SMS valid period and Sending format
orderly.
Common Settings: You can set
information report and reply route.
SMS After the information report is
Settings activated, SMS center will send status
report, via which you can expediently
know whether the party has received
or not, when the party receives your
message or cannot receive your
message for some reason. This
function needs the support of the
network operator.
Memory status: You can search the
percentage of the SMS saved in the
SIM card and the mobile phone to the
-- 59 --
60. total capacity.
PreferredStorage: You can set the
default storage position of SMS.
Choose To SIM or To Phone.
10.5 MMS
Multimedia messages (MMS), that is, multimedia
message service, with its most outstanding character
supporting multimedia functions, can transmit
multimedia informations in all kinds of forms, such as
texts, images and sounds, etc.
MMS service needs the support of Network
operator. Please make sure that your SIM card
supports this service or contact the network
operator for information before use. Your phone
supports MMS and can send and receive MMS
after necessary MMS settings.
If the receiver‟s mobile phone does not have
MMS function, then the MMS center will create
a temporary mailbox on the special server to
-- 60 --
61. save this MMS and inform the receiver in text
message to read this MMS on Internet. If the
receiver does not read this MMS within 48h,
the temporary mailbox and the MMS will be
deleted.
All MMS messages are saved in the memory of
the phone rather than the SIM card.
If the memory for MMS is full, there will be a
hint dialogue box on the main screen.
If the receiver has received and read the MMS,
then you can receive alert tone from the mobile
phone (MMS Alert Tone and MMS Report must
be set as on).
Options Descriptions
After you choose new message and
input the message
To :Send to the phone number, E-mail
Cc :send MMS to others
Bcc:Other people cannot see the when
Write you sending
Messsage Subject:Edit the subject of this MMS
Edit content: Can input the message,
insert picture, sound, and file,
video,Press “yes” after you edit message
Edit : edit the current MMS
Send :send the message
-- 61 --
62. Save and send :save the message
to outbox
Save to draft: save this message
to draft
Use Details::setting of send messages
To receive MMS into the inbox list, show
information has been received, press the
left soft key "Options" on the operations:
View : view the MMS
Reply:reply the MMS to sender。
Reply all: reply the MMS to sender,
Inbox cc
Forward : Forward the MMS to
others.
Delete:to delete the current MMS
Delete All::to delete all messages
in Inbox
Use Number:to use the sender‟s
number
Choose “outbox” option, the message
from outbox will show up on the screen,
after press “options” to choose these
options:
View : view the MMS
sending/repeat :send the current
MMS to other ,if cannot send the
Outbox “repeat” will show up
-- 62 --
63. Delete:To delete the current MMS.
Delete All::to delete all messages
in Inbox
Use Number:to use the sender‟s
number
The MMS save in the draft after edit,
after press “options” to choose these
options:
View : view the MMS
sending :send the current MMS to
Drafts other
Edit: edit the current MMS
Delete:To delete the current MMS.
Delete All::to delete all messages in
Inbox
Use Number: to use the sender‟s
number
Use the available templates from
Templates
template menu
Send: You can set the time of validity,
sending report, read returns, priority,
internal time, delivery time
Receive: You can set up the main
Message
network, roaming network, send the read
Setting report, to allow sending of the report
Filter:to set the filter while receiving
。
-- 63 --
64. Server Profile:to set the network
service
Memory Status:to show the
memory status of the MMS
10.6 Mails
This function refers to E-mail client end software.
After it is correctly configured, the mobile phone will
access the server of the e-mail service provider and
then you can receive and send e-mails with the
mobile phone. (This function needs the support from
the network and will be charged by the network
operator providing such service).
Options Descriptions
Send and
Send and receive e-mails.
Receive
Write E-mail You can write new e-mails.
The received e-mail will
automatically be saved in the inbox.
Inbox
You can view or deal with the
received e-mail in the inbox.
The e-mail to be sent will be saved
Outbox in the outbox. You can view or deal
with the e-mail to be sent in the
-- 64 --
65. outbox.
You can save the sent e-mail in the
Backup backup folder. You can view or deal
with the sent e-mail.
You can save the unfinished e-mail
Drafts in the draftbox. You can continue
editing or dealing with the draftbox.
Clear
You can clear all mailboxes.
Mailboxes
You can set e-mail transmission,
outward server, inward server,
signed file etc (if you do not know
E-mail
such setting information as link
Accounts
address and port of the server,
please contact your e-mail service
provider).
Use the templates given in the
Templates
template menu
Setup E-Mail accounts: To configure an email
account: click Menu>E-mail>E-mail
>Accounts>New account to begin creating the
e-mail account. The options are:
E-mail address: Specify the e-mail address, and
choose Options >Next to display the Protocol
screen.
Choose the protocol your e-mail provider offers,
options are POP3 and IMAP.
-- 65 --
66. Follow the on-screen instructions for either to
complete the configuration.
To successfully configure e-mail on your phone, you
will need to know the server
Names and port address for both Incoming and
Outgoing.
You would also require a working GPRS connection
that will be used to connect to your e-mail provider‟s
servers.
10.7 Calls
10.7.1 SIM 1 call history
10.7.1.1 SIM 1 missed call
Through this menu you can search for all history
records
Prompt:When screen show up with missed call icon,
press “view” to into the miss call list, choose the
number youneed ,press call key to dialed call
10.7.1.2 SIM 1 dial a call
Use this feature; you can have access to the most
recent dialed calls. Into a feature to choose deleted,
save, dialed calls, edit and send message
10.7.1.3 SIM1 Received calls
Use this feature you can have access to the most
recent received
calls .Into a feature to choose deleted, save, dialed
calls, edit and send
-- 66 --
67. message
10.7.1.4 Delete SIM 1call history
Use this feature you can delete all number from call
history or delete missed call. Dialed call, received call
10.7.1.5 SIM 1 call duration
With this function, you can have such options as
Last Call Duration, Dialed Calls‟ Duration, Received
Calls‟ Duration and Clear All Timers.
10.7.1.6 SIM card 1 Call Cost:
With this function, you can view the previous call
costs, all calls‟ costs, clear cost counters, limit costs
and set rate etc.
Previous Call Units: View and clear the previous
call units.
All Call Units: View and revise call upper limit
costs.
Clear Counters: View and revise call units. It is
necessary to input PIN2 number to revise.
Call Cost Limit: View and revise all calls‟ costs. It
is necessary to input PIN2 number to revise.
Rate: View and revise call cost upper limit. It is
necessary to input PIN2 number to revise.
Note: This function depends on the SIM card.
Some SIM cards do not support this function.
PIN2 number is provided by the network operator.
Please contact the network operator to get this
-- 67 --
68. number.
10.7.1.7 SIM card 1 Counter
From the last reset, you can count the number of the
received and sent messages
Sent: to count the messages those have been
sent
Received: to count the messages those have
been received
Note: This feature has nothing to do with the SIM
card, after replace SIM card sent and receive the
number to will not change
10.7.1.8 SIM card 1 GPRS counter
To record the GPRS counter for the phone. From the
last preset, you can obtain Last Sent GPRS, Last
Received GPRS, All Sent GPRS and All Received
GPRS or Clear GRPS Counter
Attention: some functions need support from network
service provider
10.7.2 SIM2 call history
10.7.2.1 SIM2 missed call
Through this menu you can search for all history
records
Prompt:When screen show up with missed call icon,
press “view” to into the miss call list, choose the
number youneed ,press call key to dialed call
-- 68 --
69. SIM2 dial a call
Use this feature; you can have access to the most
recent dialed calls. Into a feature to choose deleted,
save, dialed calls, edit and send message
10.7.2.3 SIM2 Received calls
Use this feature you can have access to the most
recent received
calls .Into a feature to choose deleted, save, dialed
calls, edit and send
message
10.7.2.4 Delete SIM 2call history
Use this feature you can delete all number from call
history or delete missed call. Dialed call, received call
10.7.2.5 SIM 2 call duration
With this function, you can have such options as
Last Call Duration, Dialed Calls‟ Duration, Received
Calls‟ Duration and Clear All Timers
10.7.2.6 SIM card 2 Call Cost:
With this function, you can view the previous call
costs, all calls‟ costs, clear cost counters, limit costs
and set rate etc.
Previous Call Units: View and clear the previous
call units.
All Call Units: View and revise call upper limit
costs.
Clear Counters: View and revise call units. It is
-- 69 --
70. necessary to input PIN2 number to revise.
Call Cost Limit: View and revise all calls‟ costs. It
is necessary to input PIN2 number to revise.
Rate: View and revise call cost upper limit. It is
necessary to input PIN2 number to revise.
Note: This function depends on the SIM card.
Some SIM cards do not support this function.
PIN2 number is provided by the network operator.
Please contact the network operator to get this
number.
Note: This function depends on the SIM card.
Some SIM cards do not support this function.
PIN2 number is provided by the network operator.
Please contact the network operator to get this
number.
10.7.2.7 SIM card 2Counter
From the last reset, you can count the number of the
received and sent messages
Sent: to count the messages those have been
sent
Received: to count the messages those have
been received
Note: This feature has nothing to do with the SIM
card, after replace SIM card sent and receive the
number to will not change
10.7.2.8 SIM card 2 GPRS counter
To record the GPRS counter for the phone. From the
-- 70 --
71. last preset, you can obtain Last Sent GPRS, Last
Received GPRS, All Sent GPRS and All Received
GPRS or Clear GRPS Counter
Attention: some functions need support from network
service provider
10.7.3 Call settings & advance Setting
In such menu, you can set call transfer, call waiting
etc.
Options Descriptions
SIM1/2Call
Settings
It needs the support from SIM card.
You can have such options as
System Preset, Hide Number and
Send Number etc. It is
recommended to choose “System
Caller ID
Preset”. If “Hide Number” is
chosen, when the local service
provider does not support this
function, maybe some calls cannot
be dialed out.
After this function is activated, during
Call Waiting call conversation, the network will
inform you of any incoming call.
Call Divert This function allows you to transfer
-- 71 --
72. an incoming call to another specified
phone number. You can open or
close this function.
Divert all voice calls: You can
transfer the call incoming to any
other specified phone number
without conditions.
Divert if unreachable: You can
transfer the call incoming to any
other specified phone number
when the mobile phone is off or out
of the service area.
Divert if no Answer: You can
transfer the call incoming to any
other specified phone number
when you cannot receive the call.
Divert if Busy: You can transfer
any call incoming to any other
specified phone number when you
are calling.
All data calls: You can transfer all
calls to any phone number
connected with PC.
Cancel all diverts: You can cancel
all transfers.
This function can prevent your
Call Barring mobile phone from dialing or
receiving some calls. It needs
-- 72 --
73. network support. You must obtain
the call restriction number from the
service provider. In such menu, you
can set the calls to be restricted.
You can choose Line 1 or Line 2:
Note: When Line 2 is chosen, you
Line
cannot dial a call out and the menu
switching
may vary due to different SIM card
types.
Advanced
Setting
Blacklist can be set to prevent not
want to answer the phone. Before
use, first enter the phone number
Blacklist
you want to stop and save the
number in, it open the blacklist
feature
You can choose whether to carry
out automatic redial when the
Auto Redial
called party is busy or there is no
answer.
Speed dialing allows you to make a
call by pressing and holding a
Speed Dial number key when on the idle screen.
You may assign the numbers
ranging from 2-9 to your phonebook
-- 73 --
74. contacts.
This mobile phone supports IP dial
function and you can edit three
groups of IP numbers. Choose one
IP number and press the “Option”
Soft Key to choose Open or Edit.
Open: Choose IP number as the
current IP call number.
IP Dial
Edit: Input IP number and edit it.
In Phonebook, choose the desired
number and pres the “Option” Soft
Key. If IP Call is chosen, the mobile
phone will automatically add the
currently activated IP number in front
of the phone number and dial out.
You can choose whether to have
Call Time
call duration alert (with “click”) and
Reminder
set the alert period.
Call Time You can set whether the call duration
Display can be displayed on the screen.
Auto Quick By setting a time of the call
End automatically hang up.
-- 74 --
75. 10.8 Settings
10.8.1 Dual SIM settings
In dual sim settings you have following option
Option Description
Dual SIM Set this option to open the dual-card
Open standby
Only SIM1
open Open this option only read SIM 1
Only SIM2
open Open this option only read SIM 2
Flight Can select among normal mode and
mode flight node when switch on.
10.8.2 Phone settings
You can set time, date, timed switch-on/off,
language, etc.
Options Descriptions
-- 75 --
76. You can have such settings as
City, Time/Date and Time Format.
- Set Home City: to select a city for
the time setting
Time and Date - Set Time/Date: to set current
time and date
- Set Format: to select a format to
show the time, 12 hours or 24
hours
You can activate or close the
Schedule schedule switch-on/off function.
Switch-on/off This mobile phone provides four
switch-on/off time points, for
which, you set its state and time.
The mobile phone will display the
menu languages, including
Language
English and simplified Chinese,
for your choice.
Wallpaper: to select the
wallpaper for idle screen
Screen saver: to select a screen
Display saver for idle screen and the
characteristics default time setting
Power On Display: to select 3D
to display at switch on. It could be
default setting or downloaded
Power Off Display: to select 3D
to display at switch off. It could be
default setting or downloaded
Show Date and Time: to select
switch on/off the display of time
and date on idle screen
You can set the mobile phone to
update its time and date
-- 76 --
77. Auto Time automatically. Choose it as On.
Update Auto Time Update will not affect
the setting of alarm clock,
because they are subject to the
time upon creation. However,
Auto Time Upgrade may make
some set alarm clocks expired.
Hand-wiring
You can set speed and color.
Settings
Set up the UART on SIM1 or
UART Setup
SIM2
Misc.Setting(LCD You can adjust LCD backlight
Backlight) brightness and time
Pen down You can set pen drive vibration on
vibration or off
You can set LED on Or off by
Instruct LED
using this function
This feature is directly related to
the rejection MP3 songs, video
Gsensor setting player rotation, Lut screen, unlock
sound features such as open and
close
10.8.3 Call settings
In such menu, you can set call transfer, call waiting
etc.
Options Descriptions
SIM1/2Call
Settings
Caller ID It needs the support from SIM
-- 77 --
78. card. You can have such options
as System Preset, Hide Number
and Send Number etc. It is
recommended to choose “System
Preset”. If “Hide Number” is
chosen, when the local service
provider does not support this
function, maybe some calls cannot
be dialed out.
After this function is activated,
during call conversation, the
Call Waiting
network will inform you of any
incoming call.
This function allows you to transfer
an incoming call to another
specified phone number. You can
open or close this function.
Divert all voice calls: You can
transfer the call incoming to any
other specified phone number
Call Divert
without conditions.
Divert if unreachable: You can
transfer the call incoming to any
other specified phone number
when the mobile phone is off or out
of the service area.
Divert if no Answer: You can
-- 78 --
79. transfer the call incoming to any
other specified phone number
when you cannot receive the call.
Divert if Busy: You can transfer
any call incoming to any other
specified phone number when you
are calling.
All data calls: You can transfer all
calls to any phone number
connected with PC.
Cancel all diverts: You can cancel
all transfers.
This function can prevent your
mobile phone from dialing or
receiving some calls. It needs
network support. You must obtain
Call Barring
the call restriction number from the
service provider. In such menu,
you can set the calls to be
restricted.
You can choose Line 1 or Line 2:
Note: When Line 2 is chosen, you
Line switching cannot dial a call out and the menu
may vary due to different SIM card
types.
Advanced
Setting
-- 79 --
80. Blacklist can be set to prevent not
want to answer the phone. Before
use, first enter the phone number
Blacklist
you want to stop and save the
number in, it open the blacklist
feature
You can choose whether to carry
out automatic redial when the
Auto Redial
called party is busy or there is no
answer.
Speed dialing allows you to make a
call by pressing and holding a
number key when on the idle
Speed Dial
screen. You may assign the
numbers ranging from 2-9 to your
phonebook contacts.
This mobile phone supports IP dial
function and you can edit three
groups of IP numbers. Choose one
IP number and press the “Option”
Soft Key to choose Open or Edit.
IP Dial Open: Choose IP number as the
current IP call number.
Edit: Input IP number and edit it.
In Phonebook, choose the desired
number and pres the “Option” Soft
Key. If IP Call is chosen, the mobile
-- 80 --
81. phone will automatically add the
currently activated IP number in
front of the phone number and dial
out.
You can choose whether to have
Call Time
call duration alert (with “click”) and
Reminder
set the alert period.
You can set whether the call
Call Time
duration can be displayed on the
Display
screen.
Auto Quick By setting a time of the call
End automatically hang up.
10.8.4 Network setup
This function is related to the network service provider.
When using this function, please contact your network
service provider.
In SIM1/SIM2 Network setup you can select the
network auto or manually or preferred network also
available
Options Descriptions
You can set it as Auto or Manual
(Auto recommended). When Auto is
Network chosen, the mobile phone will
Selection choose the optimal network from the
networks that the SIM card belongs
-- 81 --
82. to. When Manual is chosen, the
network shall be the same one the
SIM card registers.
Preferred Choose the preferred network
Network operator. In default state, the
preferred network is the network
under which the current SIM card is.
Add from List: Display all PLMN lists.
Add New: Add new network use
priority.
GPRS You can switch between Permanent
Connection Connection or Connection when
Necessary.
10.8.5 Security Setup
This function provides some setting options in relation
to the safe use of the mobile phone.
Options Descriptions
It is required to input PIN number.
After it is input correctly, you can have
corresponding settings. If SIM card is
set as On, then you need to input PIN
SIM Lock number for every switch-on. When
such number is input wrongly for
three times successively, it is required
to input PUK number. PUK number is
used to unlock and revise the locked
-- 82 --
83. PIN number. If PUK number is not
provided or lost, please contact the
network operator.
With this function, you can have
phone lock/unlock operation. During
operation, input the password to
Phone Lock open/close phone lock. When the
mobile phone is locked, if the SIM
card is replaced, it is required to input
phone password during switch-on.
The phone password consists of 4~8
digits.( The default PIN number
usually is 1122)
With this function, you can have
phone touch screen lock/unlock
Touch screen operation. Set the time to
Lock automatically lock the touch screen is
5s, 30s, 60s and 5min. In the set time,
if no any operation is made, then the
touch screen will be locked
automatically.
If your SIM card has such function,
you can limit the phone numbers
Fixed Dial dialed out. If this function is activated,
then your mobile phone can only dial
the phone numbers in the fixed dial
list. The settings of this function need
-- 83 --
84. input PIN2 number. This function
needs the network support.
you can limit the phone numbers to be
Barred Dial dialed out. If this function is activated,
then the mobile phone will not be able
to dial the phone numbers in the list of
fixed dials. This function needs the
network support.
With this function, you can change
Change PIN number, PIN2 number and phone
Password password. This function needs the
network support.
10.8.6 Sound Effect
Choose sounds for music. Set the equalizer to
enhance the sound effects . You can have such
options as Normal, Sub-woof, Dance, Classical, Alt,
Banquet, Pop and Rock & Roll.
10.8.7Touch Screen Calibration
When you feel the touch pen cannot work on the
touch screen smoothly, you should calibrate the touch
screen.
On the bottom of the touch screen, click System
Settings, then Miscellanous and finaly Screen
Calibration ;
According to the hint, click the center of « + » with
the touch pen until the touch screen is calibrated
properly.
-- 84 --
85. 10.8.8 Restore Factory Settings
It is the option to restore the factory settings.
According to the corresponding tip, input phone
password, click “OK” soft key to restore the factory
settings.
Note: The initial factory password is
“1122/1234/0000”.
10.8.9 Change Theme
You can change the theme by using this menu
10.8.10 Theme Image
You can select the Images from this menu to use it for
theme
10.9 Radio
Select “FM Radio” will open the FM tuner. FM tuner will
remember the last channel and set current channel to
that channel. Click ”Options” enter the sub menu :
Options Descriptions
list 9 channels(the channels auto
Channel list searched also save here)
Manual input you can input the channel
auto search auto search the channels
-- 85 --
86. you can set background play on or off,
Loudspeaker on or off , record format,
Settings audio quality, and record storage,
Channel effect
Press the red icon on the display
Record screen to record a programme or
songs playing currently.
Append to append record
File list the record files
10.10 Camera
You can take pictures with the inbuilt camera head
in the mobile phone and adjust its settings. The
pictures taken will be saved in the file system
attached to the mobile phone. The format of the
pictures is JPG.
In preview interface, you can choose Options to
enter the following menus.
Options Descriptions
With this function, you can have
Photos such operations as View, Browse
Mode, Send, Rename, Delete,
-- 86 --
87. Delete All, Sort and Storage Route
on the pictures taken.
Self Capture Set on to take self iamges
You can set Supplemental Lighting,
Shutter Sound, EV, Flicker-free,
Camera
Delay Timer and Continous Timer
Settings
on the camera so that it is in ideal
state and has high-quality pictures.
Image
Set the size and quality of images.
setting
You can set white balance as Auto,
White
Daylight, Tungsten, Fluorescent,
Balance
Cloudy or incandescent.
Scene mode You can set it as Auto or Night.
Effect You can have special effect
Settings disposal to pictures.
You can add various frames for
Frame
pictures.
Storage You can Save to Phone or Save to
Route Memory Card
Restore
You can restore the camera to
Factory
factory settings
Settings
10.11 Photos
-- 87 --
88. The pictures are saved to the album (photos folder),
when you open the album and gently turn around to
be able to feel the picture to bring you different
perspectives on the visual effects, at the same time
with more local "Humane" operations, can switch up
and down about sliding pictures. sliding on the
diagonal image to customize the size of
Options Descriptions
Browse You have two options as List and
Mode Matrix.
Storage You have two options: To Phone
Priority and To Memory Card.
10.12 Video Recorder
With this function, you can have video recording.
After adjusting the camera head direction to the
proper scene or character, click the icon on the
screen or the shooting shortcut key to start or pause
recording. During recording, press the Left/Right
direction icon on Right side to adjust zooming, the
Left/Right direction icon to adjust exposure
compensation parameters. To end recording, press
-- 88 --
89. the “Stop” soft key. The system will automatically
save the videos into the mobile phone or the
memory card. Press “Options” soft key to have the
following functions:
Options Descriptions
You can select the on state to
Self Capture
record self video
Camcorder to set related parameters for
Settings camcorder
Video Settings You can set the quality of movies.
Special Effect You can set movie special effect.
Settings There are 6 options for your
choice.
Storage Route You can Save to Phone or Save
to Memory Card
Restore Settings You can restore the recorder to
factory settings
10.13 Video Player (MP4)
This mobile phone has an inbuilt Video player, which
is used to browse or process the video files saved in
“Phone or Memory card/Video” folder, including
3gp,AVI and MP4 files etc.
Note: Local support for the motion detection
-- 89 --
90. feature, video player, as long as gently rotating
video can feel different visual effects
When enjoying video music, please choose a
moderate volume, because too high volume
may damage your audition.
In Video Player interface, Press Left “Play” Soft
Key to Play, Middle icon / to Play/ Stop,
Right “Stop” Soft Key to Stop, Left Direction
icon to Reverse, Right Direction icon to
Forward, In the play interface, press the “pause”
Soft Key to pause and again to continue.
Choose any option from such options as Play,
Send, Rename, Delete, Delete All, Taxis and
Storage Priority to edit the file.
Press „‟option‟‟ soft key to have following
function
Play: Start playing the current movie.
Send: can be sent to a variety of settings.
Rename: change the current video name.
Delete: delete the current video.
Delete all files: one to delete the list of all the
videos.
Sort by: different file attributes can be
reordered, can be easier to find.
Storage location: Choose the current storage
as a phone or memory card.
-- 90 --
91. 10.14 Sound Recorder (Recorder)
Audio record files are saved under “Phone/Audio” .
In AudioRec File List interface, press Options, then
you can have such options as Record, Play, Attach
and Rename, Delete, Delete All, Settings and
Send etc.
Options Descriptions
New Record Start to record.
In list, press „option‟ to view
List
following
Play You can play music selected.
You can rename of the record.
Note: If this record has been set as
Rename
call ring etc, once it is renamed, the
call ring will restore to default one.
Delete Delete the selected music.
Delete All Delete all music.
You can send the record to
Send
Profiles.
In settings, press „option‟ for
Settings
following
-- 91 --
92. Select the storage phone or
Storage
memory card
You can select the Different audio
File Format
format
Audio
Select the audio quality
Quality
10.15File Manager(Document)
This mobile phone provides certain space for the user;
besides, it supports Memory Card. With this function,
you can conveniently manage all directories and files
saved on the mobile phone and Memory Card
With this function, you can manage all your files.
Options Descriptions
Open Open a specified folder.
New Folder Create a new folder.
You can format files. Note: After
Formatting formatting, all data in the file stem
will be lost.
10.15.1 Open
With this function, you can enter the root directory of
the memory, which will list system default folders; and
you can create folders and user files (for the first
switch-on or when the user does not change
directories, the root directory has system default
-- 92 --
93. folders only).
Options Descriptions
Open Open the appointed folder
Create You can create a new folder in the
Folders appointed folder
Rename You can rename the appointed folder
Delete Delete the appointed folder
You can have taxis operation on the
files on the memory and display them
Sort by in the mode after taxis. You can sort
them by name, type, time, size and
none
The appointed item is files, and have the following
operations according to different file types:
Options Descriptions
View or play the appointed file.
View (Play) Change may occur for files of
different types
You can send audio files to Profiles
and Bluetooth and video files to
Wallpaper, Screen Protector,
Send
Switch-on Cartoon, Switch-off
Cartoon, Phonebook and
Bluetooth
List the date and size of the
Details
appointed file
Rename You can rename the appointed file
You can copy the appointed file to
Copy
the appointed place. Click “Back”
-- 93 --
94. to cancel this order. If the space is
not sufficient for copy operation,
then the mobile phone will give tip
information
You can move the appointed files
Move
to the appointed position
Delete Delete the appointed file
You can delete all files under the
Delete All
appointed directory
Mark several You can select the several files
You can have taxis operation on
the files on the memory and
Sort by
display them in the mode after
taxis.
10.16 Games
Local support for the java programming language,
network users can freely download a variety of WAP
games, action comics, novels, and other small, but
also through the data line from the computer to
download cell phone games (JAR format) to the
phone memory, the installation! Enjoy Similar to the
Internet on a variety of services
Games
Bring their own cell phone, two mobile phone-general
of the game, the user can be required to download
-- 94 --
95. and install on the WAP network
Game Settings: You can set BGM,
Background sound effect, Game
Vibration,volume
Enter the desired game from Game List and
then you can choose New Games or view
Ranking and Instructions.
10.17 Clock
10.17.1 World Clock
With the Left and Right Direction icon , you
can view the GMT time of the major cities in the
world. The screen will display the city name and the
current date and time.
Press the Left and Right Direction icon
once or multiple times to choose the city to be
viewed, and then the screen will display the local
data and time. You can press the “Option” Soft
Key to have corresponding settings.
10.17.2 Alarm Clock
This mobile phone can set four alarm clocks. You
can set alarm clock on/off, alarm time, alarm mode
and alarm period.
-- 95 --
96. 10.17.3 Stopwatch
The mobile phone provides stopwatch function.
There are general stopwatch and multi-directional
stopwatch available.
Please see the following descriptions:
Options Descriptions
Split Timing: If Split Timing is
chosen, press “Start” to stat timing.
To measure Split Timing, press “Split
Timing”, and then the screen will
General display “Split Timing” on the top to
Stopwatch the working time. You can roll to view
each time. Press “Stop” to stop
timing; press “Continue” to continue
timing; press “Back”, then the screen
will display “Save” dialogue box.
Press “Yes” to save time.
Lap Timing: If Lap Timing is chosen,
press “Start” to stat timing. To
measure Lap Timing, press “Lap
Timing”. Press “Stop” to stop timing.
Please refer to the above “Split
Timing”.
View Records: The mobile phone will
display the name list of the time sets
or the final time list, you can choose
the desired time set or save and
delete it.
Multi-directio In the same interface, choose any
nal stopwatch to have timing operation.
-- 96 --
97. 10.18 Profiles
This mobile phone provides such profiles as
General, Meeting, Outdoor, Indoor, Headset and
Bluetooth and has default settings. After you insert
the headset, you can directly enter the headset
mode.
For every profile, you can enter customize Settings
and set the following options.
Options Descriptions
Include Incoming Call, Alarm Clock,
Tone setup power-on, power-off, Message Alert
Tone and Keypad Tone.
Set the volume of Ring and Keypad
Volume
Tone.
You can choose any one from Ring,
Vibration, Vibration and Ring ,and
Ring Mode
Ring after Vibration as the current
ring mode.
You can choose any one from single,
Ring Tone
Repeat and Ascending as the current
Type
ring type.
Extra Tone You can have Select/Cancel settings
-- 97 --