Clifford & Snell - Manual Call Point, Hazardous Area (ATEX) - Yodalex MCP

1. Tom Cribb Road, Thamesmead,
London SE28 0BH
Tel: +44 (0)20 8316 4477
or (0)20 8317 1717
Fax: +44 (0)20 8317 2400
Email: sales@cliffordandsnell.com
Web Site: www.cliffordandsnell.com
• Break Glass and Push Button Call Point Station
• Light Weight Glass Reinforced Polyester (GRP) Ex d Enclosure
• Dual 20mm gland entries, one fitted with approved stopping plug
(2 * M20 holes located at the top of the Call Point. Glands supplied
separately)
• Monitoring facility (DC only)
• Weather resistant high performance red paint finish as standard
• High intensity Red LED can be fitted as an optional extra to indicate
operation. Available up to 24Vdc
• Meets the requirements of BS EN 54-11
• Break Glass version - Optional stainless steel Lift Flap
Test Key provided as standard
• Push Button version - Push to operate - Reset Key provided.
Protection Flap as standard
• Stainless steel fixings
TECHNICAL SPECIFICATION
• IP 66 rated
• Weight Approx. 1Kg
• Relative Humidity 95% @ 40 degC
• Cetified Temp –55ºC to +70ºC
• Voltage Up to 250V
• Switch Ratings DC 12 - 30V 5A (resitive) or 3A (Inductive)
• 30 - 50V 1A resitive or inductive
• AC 12 - 250V 5A resistive or inductive
• Suitable for Zones 1 & 2
• Up to 4 cable entries. Top Entries 2 * as standard.
• Internal earth continuity provided as standard
• 7 way 2.5mm terminal block mounted on a PCB.
• Single Pole change over switch supplied as standard and fitted directly
onto the 7 way connector.
MAIN FEATURES
Controlled document No.D7489-01-02 (CN100301) My DocumentsSALES DATAdata
MOUNTING
Via holes through the Back Box. See Installation Instructions.
Unit type
APPROVAL SPECIFICATION
C l i f f o r d & S n e l l
DIMENSIONS (mm)
ATEX
Clifford & Snell a division of Signature Industries Ltd part of the Digital Angel Corporation
Manual Call Points
Yodalex
Break Glass
Switches
Single Pole
Double Pole
Additional
Options
(User to specify
resistor & diode
values)
Lift FLap
End Of Line Resistor
In line Resistor
IN Line & EOL resistor
Push Button
CONFIGURATOR
Break Glass (BG)
Push Button (PB)
Explosion Proof
132.5 (5.2”)
74 (2.9”)
132.5 (5.2”)
98 (3.9”)
A B
C D
Duty Label (Customer to specify wording)
Tag Label (Customer to specify wording)
LED
Labels
Entries 2 * M20 top entries A+Bstandard
(Suffix A = AC or D = DC. Example SPD = single pole dc switch)
(For other options select position of entries required
and list
Finish Red (standard). (Other options upon application)
Standards for Manual Call Points
European Standards (ATEX)
EN60079-0:2006 & EN60079-1:2007
EN61241-0:2004 & EN61241-1:2004
Break Glass Baseefa08ATEX0269 Ex II2 GD Ex tD A21 (Tamb –55°C to +70°C)
Push Button Baseefa08ATEX0269 Ex II2 GD EX tD A21 (Tamb –55°C to +70°C)
International Standards (IECEx)
IEC60079-0:2004 Edition 4 & IEC60079-1:2007 Edition 6
IEC61241-0:2004 Edition 1 & IEC61241-1: 2004 Edition 1
Break Glass IECEx BAS 08.0089 Ex II2 GD Ex tD A21 (Tamb –55°C to +70°C)
Push Button IECEx BAS 08.0089 Ex II2 GD Ex tD A21 (Tamb –55°C to +70°C)
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK