1. The document describes the SX range of enclosures, which are available in mild steel or stainless steel in various standard sizes. 2. The enclosures feature hinged, lift-off doors with captive screws, internal/external earthing, and optional gland plates and accessories. 3. The SX enclosures are suitable for hazardous areas and have various international certifications. They provide IP66/IP67 protection and wide temperature ranges.

1. WWW.CABLEJOINTS.CO.UK
SX Range
BPG Range
BPGA Range
3
ZAG Range
4
High Voltage
5
Fire Rated
Stainless Steel and Mild Steel Enclosures
2
6
ZP Range
SX
1
7
Specials
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
8
Technical
THORNE & DERRICK UK
9

2. SX
1
SX Range
Stainless Steel and Mild Steel Enclosures
The SX range comprises 14 sizes of enclosure
manufactured in either mild steel or stainless
steel. 11 sizes are available in depths of 140 or
200mm and 8 sizes are available in depths of
140, 200 or 300mm. The majority of the range
can be fitted with removable gland plates on
any or all of the four sides. The mild steel
version (MSX) is available with a number of
paint options (most RAL colours are available)
and anti-corrosion finishes. Further advice on
surface finishes can be sought from the
ABTECH sales office.
Earthing is accomplished by means of an
Internal / external earth stud fitted as standard
which can be connected to the terminal
mounting rail or component mounting plate.
Optionally, earth studs can be fitted to
the door and gland plates. Rail mounted
earth terminals or proprietary earth bars can
be fitted inside the enclosure and ABTECH
Sales staff will be happy to advise on this.
When fitted with a standard neoprene
gasket, the enclosure is suitable for ambient
temperatures of - 40°C to + 80°C. Alternatively,
when fitted with an optional silicone gasket the
temperature range is increased to - 70°C to to
+ 130°C.
The SX range of enclosures are suitable for
use in hazardous areas and can be supplied
with a number of certificates. ATEX EEx‘e’ to
BS EN 50019 (Zone 1 & 2) EEx‘nA’ to BS
EN50021 (Zone 2) and NEMA 4X (CSA, UL &
FM class 1, div 2) and GOST.
The stainless steel range (SSX) is
manufactured in 316 grade stainless steel to
give the maximum environmental protection.
The main body is manufactured from 2mm
thick sheet and the mounting straps and
gland plates from 3mm thick plate. Cable
entries can be drilled in the enclosure door or
sides or through the gland plates, if fitted.
Entries may also be drilled through the rear
face of the enclosure (EEx’e’ versions also.)
Another important feature of the SX range is
the hinged, lift-off door, which is held to the
enclosure by at least 4 captive stainless steel
screws, which also maintain the correct
compression on the gasket. The hinges are
solid block, machined oversize to enable the
screws to control the closing of the door, not
the hinge, its only function being to support the
door when opened. The hinges allow easy
removal of the door with only minimal opening
required before removal (less than 10°).
8
The SX range can be supplied fitted with any
component approved terminal to apparatus
level or can be supplied empty as component
approved for the clients own certification
requirements.

3. SX
SX Range
BPG Range
BPGA Range
• Ingress Protection up to IP68
• Fire Resistant to IEC331
The SX range has many features which lend
itself to a wide variety applications, not least of
which is the ability to be constructed to almost
any dimension due to its fabricated nature. This
can also be applied to EEx‘e’ enclosures
where the certification allows oversize
enclosures to be manufactured whilst retaining
the next smallest sized enclosure’s power
rating.
• Impact Resistant > 10 Nm
• Corrosion Resistant
• Gland plates can be fitted to any or all
four sides (size SX0 and above)
• Certification for use in Zone 1 and 2
• UL, CSA, ATEX and GOST Approvals
The SX range is also suitable for fire resistance
applications and when fitted with ceramic
terminals meets the requirements of IEC 331
(750°C for 3 hours) and also BS6387/1983
(950°C for 3 hours). Further details are
available in Section 6 of this catalogue.
• Ideal for Petrochemical and Marine
applications
ZAG Range
• Wide Operating Temperature
(- 70°C to + 130°C)
4
High Voltage
SX Range Features
3
5
Fire Rated
Other applications include junction boxes, both
industrial and hazardous area, OEM
applications, fire protection systems, tunnel
wiring, IP68 applications, etc.
2
6
ZP Range
IP68 enclosures are also available for depths
up to 120 ft to special order. Further
information on submersible enclosures is
available in Section 8 of this catalogue.
1
7
Specials
The SX range was specifically designed to
meet the rigours of the North Sea environment
and is capable of achieving IP66 and IP67. It
has also undergone and passed the Shell/ERA
deluge test which was devised to adequately
test enclosures and electrical equipment which
is routinely subjected to ships deck conditions
or fire deluge systems.
8
Technical
Stainless Steel and Mild Steel Enclosures
9
9

4. SX
Stainless Steel and Mild Steel Enclosures
229
-
SX0.5
184
274
-
SX1
234
324
-
SX1.5
306
306
-
SX2
372
324
-
SX3
372
448
-
SX4
372
510
-
SX5
510
510
-
SX6
510
780
-
SX7
650
950
-
SX8
800
1250
-
Ordering Example;
SX1.5 300 4GP LB EB
(Stainless Steel SX1.5 300mm deep, 4 gland plates, label bracket on door and internal earthing bar)
1. The range is available either in stainless steel 316 (SX variants) or mild steel (MSX variants).
2. Manufacturing tolerances are +/- 3mm on overall dimensions and +/-0.5mm on fixing hole centres.
3. Silicone gasket increases temperature rating (-70º to +130º C) and may increase working life in some applications.
4. Breather drain available in IP66 stainless steel or plastic.
5. Radio Frequency Interference (RFI) gasket may reduce IP rating.
10
RF – RFI Protection
(see note 5)
152
MP - Component Mounting
Plate (Steel /Stainless Steel)
102
SX0
TP - Tamper Proof Lid Fixing
Screws
152
BD - Breather Drain
(see note 4)
152
SIL - Silicone Gasket
(see note 3)
63
SX66
EB - Internal Earthing Bar
152
ES - Earth Stud fitted to Door
and Gland Plates
102
LB - Label Bracket Welded to
Door
SX64
Gland Plates
(on any or all four sides)
51
300mm Depth
Depth (mm) (see note 2)
114
200mm Depth
Height (mm) (see note 2)
114
140mm Depth
Width (mm) (see note 2)
SX45
EP – Electro-polished external
surfaces (SX range only)
The following table is a list of the available accessories suitable for particular standard sizes of SX
enclosures. Care should be taken when ordering accessories for use with enclosures intended for
hazardous areas to ensure that compliance with certification is retained.
Part Number (see note 1)
1
SX Range
Accessories and Options

5. SX
SX Range
BPG Range
BPGA Range
ZAG Range
High Voltage
Component Mounting Plate
(steel or stainless steel 316)
4
5
Fire Rated
Internal Earthing bar
(can be fitted with clamps)
Electro-polished
(external surfaces on SX range only)
3
6
ZP Range
Label Bracket
(welded to door)
Earth Stud fitted to door and gland plates
2
7
Specials
Full width, full height Gland Plates
(can be fitted to any or all sides)
1
8
Technical
Stainless Steel and Mild Steel Enclosures
9
11

6. MSX 45 / SSX 45 Drawing
1
12
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

7. 281-691
281-992
281-993
282-691
284-691
5
4
3
0
0
SAK 6
SAK 10 *
SAK 16 *
SAK 35
SAK 70
4
1
1
1
1
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
9
7
4
3
0
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N
7
0
8
0
0
9
264-120
281-998
280-998
285-691
0
0
0
7
7
0
8
1
UK 2.5 N
Phoenix
280-999
7
SAK 4
283-691
280-992
7
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Side B-D
0
0
2
Side B-D
SX 45 Photo
114 x 51mm
114 x 51mm
0
0
2
2
4
4
2
Side A-C
Entry Matrix
Drilling Envelope
Side A-C
M40
M32
M25
M20
M16
Entry Size
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone
2)
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
8.0W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
1200g
Stainless steel 316 (1.4404)
Mild steel
51mm
114mm
114mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 45 / SSX 45 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
13

8. MSX 64 / SSX 64 Drawing
1
14
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

9. 281-691
11
9
0
0
0
SAK 6
SAK 10 *
SAK 16 *
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone
2)
262-132 (2)
15
9
7
0
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N
262-134 (4)
264-134 (4)
17
UK 3 N
2
3
2
3
9
15
15
18
0
0
0
0
0
15
15
0
18
Side B-D
0
1
2
Side B-D
SX 64 Photo
152 x 63mm
102 x 63mm
0
2
3
4
8
6
3
Side A-C
Entry Matrix
Drilling Envelope
Side A-C
M40
M32
M25
M20
M16
Entry Size
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
7
Specials
8
Technical
Power Rating
10.258W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
17
264-220
264-120
281-998
280-998
285-691
283-691
284-691
282-691
281-993
UK 2.5 N
Phoenix
280-999
15
SAK 4
281-992
280-992
15
Wago
SAK 2.5
Weidmuller
1
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
1500g
Stainless steel 316 (1.4404)
Mild steel
63mm
152mm
102mm
Terminal Populations
Maximum Number of Rows
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 64 / SSX 64 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
15

10. MSX 66 / SSX 66 Drawing
1
16
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

11. 281-691
281-992
281-993
282-691
284-691
11
9
7
6
0
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
2
3
2
264-134 (4)
262-132 (2)
262-134 (4)
17
14
9
7
6
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
Side B-D
.
Side B-D
8
2
3
152 x 102mm
SX 66 Photo
152 x 102mm
2
3
6
8
14
6
14
Side A-C
Entry Matrix
Drilling Envelope
Side A-C
M40
M32
M25
M20
M16
Entry Size
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
7
Specials
8
Technical
Power Rating
14.287W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
3
264-132 (2)
10
16
15
18
0
264-220
264-120
281-998
280-998
285-691
17
7
10
11
15
15
15
18
18
UK 2.5 N
Phoenix
280-999
15
SAK 4
283-691
280-992
15
Wago
SAK 2.5
Weidmuller
1
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
2200g
Stainless steel 316 (1.4404)
Mild steel
102mm
152mm
152mm
Terminal Populations
Maximum Number of Rows
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 66 / SSX 66 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
17

12. MSX 0 / SSX 0 Drawing
1
18
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

13. 200mm deep
4000g
281-691
281-992
281-993
282-691 *
284-691 *
16
12
10
7
5
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
12
4
3
4
3
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
25
21
12
10
8
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
21
20
24
0
264-220
264-120
281-998
280-998
285-691
25
0
12
15
20
20
20
24
24
UK 2.5 N
Phoenix
280-999
19
SAK 4
283-691
280-992
21
Wago
SAK 2.5
Weidmuller
1
Side B-D
SX 0 Photo
87 x 75mm (4 x gp 140)
144 x 75mm (4 x gp 140)
2
2
3
Side B-D
Drilling Envelope
1
1
2
6
9
5
3
Side A-C
Entry Matrix
Side A-C
M40
M32
M25
M20
M16
Entry Size
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
7
Specials
8
Technical
Power Rating
19.874W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
2200g
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
229mm
152mm
Terminal Populations
Maximum Number of Rows
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 0 / SSX 0 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
19

14. MSX 0.5 / SSX 0.5 Drawing
1
20
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

15. 200mm deep
6000g
281-691
281-992
281-993
282-691 *
284-691 *
42
34
14
10
7
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
32
12
8
12
8
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
68
56
34
14
11
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
56
27
31
0
264-220
264-120
281-998
280-998
285-691
68
28
16
21
27
27
27
31
31
UK 2.5 N
Phoenix
280-999
52
SAK 4
283-691
280-992
56
Wago
SAK 2.5
Weidmuller
2
Side B-D
4
189 x 75mm (4 x gp 140)
SX 0.5 Photo
119 x 75mm (4 x gp 140)
2
3
Side B-D
Drilling Envelope
1
2
4
8
7
2
12
Side A-C
Entry Matrix
Side A-C
M40
M32
M25
M20
M16
Entry Size
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
7
Specials
8
Technical
Power Rating
19.874W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
5000g
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
274mm
184mm
Terminal Populations
Maximum Number of Rows
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 0.5 / SSX 0.5 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
21

16. MSX 1 / SSX 1 Drawing
1
22
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

17. 200mm deep
7200g
281-691
281-992
281-993
282-691
284-691 *
54
44
18
14
10
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
42
14
10
14
10
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
86
72
44
18
14
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
72
34
41
12
264-220
264-120
281-998
280-998
285-691 *
86
18
21
27
34
34
34
41
41
UK 2.5 N
Phoenix
280-999
66
SAK 4
283-691 *
280-992
72
Wago
SAK 2.5
Weidmuller
2
Side B-D
6
7
4
239 x 75mm (4 x gp 140)
SX 1 Photo
169 x 75mm (4 x gp 140)
3
Side B-D
Drilling Envelope
2
4
10
10
2
14
Side A-C
Entry Matrix
Side A-C
M40
M32
M25
M20
M16
Entry Size
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
7
Specials
8
Technical
Power Rating
29.206W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
6300g
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
324mm
234mm
Terminal Populations
Maximum Number of Rows
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 1 / SSX 1 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
23

18. MSX 1.5 / SSX 1.5 Drawing
1
24
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

19. 200mm deep
8800g
99
60
34
24
20
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
283-691 *
284-691 *
282-691
281-993
281-992
281-691
280-999
280-992
Wago
32
38
48
64
64
64
74
74
60
21
15
21
15
264-220
264-132 (2)
264-134 (4)
262-132 (2)
262-134 (4)
120
99
60
34
26
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
99
64
74
11
UK 2.5 N
264-120
281-998
280-998
285-691 *
120
75
SAK 4
Phoenix
93
SAK 2.5
Weidmuller
3
Side B-D
5
10
6
221x 75mm (4 x gp 140)
SX 1.5 Photo
241 x 75mm (4 x gp 140)
3
Side B-D
Drilling Envelope
3
3
10
14
4
12
Side A-C
Entry Matrix
Side A-C
M40
M32
M25
M20
M16
Entry Size
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
7
Specials
8
Technical
Power Rating
32.284W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
7300g
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
306mm
306mm
Terminal Populations
Maximum Number of Rows
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 1.5 / SSX 1.5 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
25

20. MSX 2 / SSX 2 Drawing
1
26
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

21. 200mm deep
11.3Kg
99
78
66
42
24
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
27
18
27
18
264-134 (4)
262-132 (2)
262-134 (4)
156
132
78
66
54
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
6
7
239x 75mm (4 x gp 140)
SX 2 Photo
307 x 75mm (4 x gp 140)
3
Side B-D
Drilling Envelope
4
4
10
14
5
14
18
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
36.500W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
156
78
132
126
150
30
44
78
99
84
126
264-220
264-120
281-998
280-998
285-691 *
283-691 *
284-691 *
282-691
281-993
281-992
126
150
150
3
UK 2.5 N
Phoenix
280-999
123
SAK 4
281-691
280-992
132
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
9.5Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
324mm
372mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 2 / SSX 2 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
27

22. MSX 3 / SSX 3 Drawing
1
28
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

23. 200mm deep
13.3Kg
281-691
281-992
126
102
84
63
45
SAK 6
SAK 10 *
SAK 16 *
SAK 35 *
SAK 70 *
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
264-134 (4)
262-132 (2)
262-134 (4)
201
168
102
84
69
UK 3 N
UK 5 N
UK 10 N *
UK 16 N *
UK 35 N *
24
36
24
36
99
168
162
189
38
56
99
126
108
162
162
189
189
3
9
7
363 x 75mm (4 x gp 140)
SX 3 Photo
307 x 75mm (4 x gp 140)
5
Side B-D
Drilling Envelope
4
6
16
14
5
20
18
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
42.289W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
264-220
264-120
281-998
280-998
285-691 *
201
283-691 *
284-691 *
282-691
UK 2.5 N
Phoenix
280-999
156
SAK 4
281-993
280-992
168
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
11.3Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
448mm
372mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 3 / SSX 3 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
29

24. MSX 4 / SSX 4 Drawing
1
30
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

25. 281-992
281-993
282-691
284-691
120
99
75
54
SAK 10
SAK 16
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
42
30
42
30
264-134 (4)
262-132 (2)
262-134 (4)
237
198
102
99
81
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
10
7
7
5
425 x 75mm (4 x gp 140)
SX 4 Photo
307 x 75mm (4 x gp 140)
Side B-D
Drilling Envelope
6
20
14
4
24
18
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
44.726W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
237
117
198
189
222
44
264-220
264-120
281-998
280-998
285-691
66
117
147
126
189
189
222
UK 2.5 N
Phoenix
281-691
150
SAK 6
283-691
280-999
183
SAK 4
222
3
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
280-992
198
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Terminal Populations
1
BPG Range
Temperature
IP Rating
-40º to 80º C
(standard neoprene gasket)
66 or 67
Weight
200mm deep
14.8Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
510mm
372mm
140mm deep
12.7Kg
Material
Depth
Length
Width
MSX 4 / SSX 4 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
31

26. MSX 5 / SSX 5 Drawing
1
32
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

27. 200mm deep
20.0Kg
281-691
281-992
281-993
282-691
200
160
132
100
72
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
56
40
56
40
264-134 (4)
262-132 (2)
262-134 (4)
316
264
160
132
108
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
10
7
10
7
425 x 75mm (4 x gp 140)
SX 5 Photo
445 x 75mm (4 x gp 140)
Side B-D
Drilling Envelope
6
20
20
6
24
26
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
50.328W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
316
156
264
252
296
66
99
264-220
264-120
281-998
280-998
285-691
283-691
156
196
189
252
252
296
296
4
UK 2.5 N
Phoenix
280-999
244
SAK 4
284-691
280-992
264
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm deep
17.0Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm
510mm
510mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 5 / SSX 5 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
33

28. MSX 6 / SSX 6 Drawing
1
34
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

29. 200mm
27.0Kg
300mm
32.0Kg
281-691
281-992
281-993
282-691
284-691
332
264
220
168
120
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone 2)
92
64
92
64
264-134 (4)
262-132 (2)
262-134 (4)
524
440
264
229
176
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
34
18
11
9
20
11
7
6
695 x 75mm (4 x gp 140)
SX 6 Photo
445 x 75mm (4 x gp 140)
Side B-D
Drilling Envelope
40
26
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
57.383W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
264
440
424
496
114
264-220
264-120
281-998
280-998
285-691
524
165
264
328
318
424
424
496
496
4
UK 2.5 N
Phoenix
280-999
404
SAK 4
283-691
280-992
440
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm
24.0Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm or 300mm
780mm
510mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 6 / SSX 6 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
35

30. MSX 7 / SSX 7 Drawing
1
36
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

31. 200mm
39.0Kg
300mm
52.0Kg
281-691
281-992
281-993
282-691
284-691
520
415
345
260
150
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone
2)
145
100
145
100
264-134 (4)
262-132 (2)
262-134 (4)
820
685
415
345
280
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
60
39
28
16
28
13
10
8
865 x 75mm (4 x gp 140)
SX 7 Photo
585 x 75mm (4 x gp 140)
Side B-D
Drilling Envelope
81
34
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
68.000W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
820
410
685
660
775
188
264-220
264-120
281-998
280-998
285-691
272
410
510
528
660
660
775
775
5
UK 2.5 N
Phoenix
280-999
635
SAK 4
283-691
280-992
685
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm
35.0Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm or 300mm
950mm
650mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 7 / SSX 7 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
37

32. MSX 8 / SSX 8 Drawing
1
38
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
SX Range
SX
Stainless Steel and Mild Steel Enclosures

33. 200mm
52.0Kg
300mm
59.0Kg
281-691
281-992
281-993
282-691
284-691
520
415
345
260
150
SAK 6
SAK 10
SAK 16
SAK 35
SAK 70
GOST-R Ex e (Zone 1 & Zone 2)
FM - AEx e (Class 1 Zone 1 & Zone2)
CSA - Ex e (Class 1 Zone 1 & Zone
2)
145
100
145
100
264-134 (4)
262-132 (2)
262-134 (4)
820
685
415
345
280
UK 3 N
UK 5 N
UK 10 N
UK 16 N
UK 35 N
66
58
30
20
17
42
36
18
12
10
Side B-D
SX 8 Photo
1165 x 75mm
735 x 75mm
Drilling Envelope
Side A-C
M40
M32
M25
M20
M16
Side B-D
Side A-C
Entry Matrix
ZAG Range
4
High Voltage
5
Fire Rated
6
ZP Range
7
Specials
* Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.
3
8
Technical
Power Rating
119.462W
NEMA 4X (CSA, UL & FM)
(class 1 division 2)
2
BPGA Range
Certification
264-132 (2)
820
410
685
660
775
188
264-220
264-120
281-998
280-998
285-691
272
410
510
528
660
660
775
775
5
UK 2.5 N
Phoenix
280-999
635
SAK 4
283-691
280-992
1295
Wago
SAK 2.5
Weidmuller
Maximum Number of Rows
Entry Size
SX Range
ATEX EEx nR (Zone 2)
BS EN 60079-15
ATEX EEx nA (Zone 2)
BS EN 60079-15
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7
-70º to 130º C
(silicone gasket)
-40º to 80º C
(standard neoprene gasket)
66 or 67
140mm
40.0Kg
Stainless steel 316 (1.4404)
Mild steel
140mm or 200mm or 300mm
1250mm
800mm
Terminal Populations
1
BPG Range
Temperature
IP Rating
Weight
Material
Depth
Length
Width
MSX 8 / SSX 8 Specifications
SX
Stainless Steel and Mild Steel Enclosures
9
39

34. SX
1
SX Range
Stainless Steel and Mild Steel Enclosures
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
40