![Sandmaster 3000User Manuel For Model #MT3000Thank you for purchasing the Sandmaster 3000 by MT TOOLS! Get ready to enjoy a high performance sander that gives you the comfort that you deserve. MT TOOLS patented MOUSE TECH ergonomics gives you the comfort of your own computer mouse while using a powerful detail sander. Before you go and enjoy your product please take time to read the user manuel. 2009Michael TasevskiMAE 377 Project 0812/14/2009 WARNING: SPECIFIC SAFETY RULES • Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a
live
wire will make exposed metal parts of the tool
live
and shock the operator. • Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. ALWAYS use safety glasses. Always exhibit caution when charging and using the battery Never use the battery for any other use other than intended • Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. FUNCTIONAL DESCRIPTION 1762125146685 ,[object Object]](https://image.slidesharecdn.com/usermanuel-091214085121-phpapp02/85/User-Manuel-1-320.jpg)
Recomendados
Recomendados
Mais conteúdo relacionado
Mais procurados
Mais procurados (20)
Semelhante a User Manuel
Semelhante a User Manuel (20)
Último
Último (20)
User Manuel
- 2. Sanding Base
- 3. Vacuum Bag
- 4. Battery
- 7. 10,000 opm (orbits per minute)
- 8. Hook and loop sandpaper attachment
- 10. Ergonomic “MOUSE TECH” design grip and buttons.OPERATION: Detail Sanding The SANDMASTER 3000 is equipped with a pointed base which allows you to use it on large flat surfaces and tight spots or corners. 375285038100Turning the Sander ON and OFF • Insert Battery • Push the button labeled “I” on the sander to turn it “ON.” (See Figure 2) • Push the button labeled “O” on the sander to turn it “OFF.” Inserting and Removing Battery • Insert Battery by placing it into battery Port. • Use clips on the side of the housing to secure battery. • Remove Battery by releasing clips and pulling from port. Figure 2: “ON” button 381000034925Cleaning Vacuum Bag (Figure 3) • After a period of use the vacuum bag will need to be removed. • First remove the bag by pulling it out from the port. • Turn cloth part of bag inside out to remove dust. • Replace vacuum bag and continue use. Replacing sanding sheets • Detach the old sheet. • Hold the tool with the sanding base facing upwards. • Place the new sanding sheet onto the sanding base, by matching it up to the base and attaching it to the Velcro hook & loop. Figure 3: Vacuum bag removal TROUBLESHOOTING Problem Possible Cause Possible Solution • Unit will not start. • Battery pack not installed properly. • Check battery pack installation. • Battery pack not charged.• Check battery pack charging requirements. THREE YEAR LIMITED WARRANTY MT Tools will repair or replace, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase for tools. PARTS LIST