1. Troubleshooting CRC Error in PST File Not an Issue with PST Recovery
Covering many arenas like data recovery, email migration, this Company is a well-known
software solution provider, whose products are known to rule the online market. One
such tool is Outlook Recovery that can even help users in case they are facing CRC error
in PST file & recover PST file.
Outlook users confront many problems while working on Outlook program. One of these
problems is the CRC error in PST file, which basically is a cyclic redundancy check
error that crops up every now and then. This surely calls for some PST CRC error fix
solution. Such type of data error or let’s say the Outlook CRC error can be resolved by
performing the recovery process for PST file using some Outlook PST Recovery
software solution.
Resolving the CRC Error in PST File
Here we will focus on the CRC error emerged while transferring a particular PST file
from one system to another system. CRC or the Cyclic Redundancy Check error with
some specific PST file of Outlook mostly indicate to some bad spots over your hard disk
drive of the system, especially to the location of the hard disk where that PST file has
been located. Such type of error emerges when you try to copy a PST or move it from its
original location to some other location. This is when you can observe such problem.
Therefore, to recover your data in such a troubled situation, you should perform the
operation to repair your hard disk before thinking to go over to some PST repair solution.
Explaining with an Example
Let us take up an example to make you understand the situation clearly so that you can
comprehend it and get a proper solution for this problem encountered. Let us say for
example, you needed to transport all your Outlook mailbox data from your system to
some other machine. In this process, when you attempt to copy that data and transfer it to
another system, you fail to succeed and the operation is not completed. Furthermore, you
even see an error message popping up on your screen that reads: “…PST could not be
accessed...Cyclic redundancy check.” The most probable cause of this issue can be the
corruption in the PST file that has been transferred from one place to another. The
solution of this problem can be in the following ways:
• First of all, you must make sure that when you transport the PST, then the targeted
location where you are transferring it is not at all problematic. For this purpose,
you can attempt to copy the required PST to NUL. For this, you will have to first

2. open the command prompt, and then go to the original location of that PST file,
and then use the 'copy' command for copying that PST file to NUL. If it works on
to copying the file successfully, then you will have to replace or may be repair the
chosen destination drive for the file.
• However, if the problem is with the original disk drive itself, then you must repair
it first. For that, you must first click ‘Start’ >> ‘Run’ and then run 'chkdsk'
command using the '/f 'switch.
• However, if the problem is that the original PST file which has to be transported is
corrupted, then you can try and use 'Scanpst.exe' or the Inbox Repair tool to repair
that PST file.
• If ScanPST tool does not work in your case, then a third-party tool would surely
do. Outlook Recovery software is one such tool that can repair PST and solve CRC
error in PST file, whereby giving you back your mailbox data as well.
For more info: http://www.systoolsgroup.com/outlook-recovery/order-now.html