More than Just Lines on a Map: Best Practices for U.S Bike Routes
Low flow rotameter
1. Low Flow Acrylic Body
Rotameter
Defination: Low Flow Acrylic Body
Rotameter
Low flow Acrylic Body Rota meter is a simple
and reliable instruments for reading of
continuous flow rate indication, in the Acrylic
tube area.
Manufacturing Process:
Acrylic Body Low Flow Rota meter is a tapered
tube, drilled directly in acrylic body, with engraving the Flow rate. In Acrylic Body Low Flow
Rotameter, flow range is calibrated, engraved and colored with black or other colors on
Acrylic body itself for long lasting durability.
Flow Control valve :
These flow meters or Low Flow Acrylic Body rotameter, are provided with the Flow control
valve / Needle Valve, at the entry point of the rotameter, to control the flow of the fluid, as
required.
End Connection :
End-Connection comes as back or rear connection, also known as an Inlet & outlet of the
flow meter or Low Flow Acrylic Body Rotameter, generally fitted with as a Screwed or Nozzle
connection.The end connection comes as a Back or Rear connection, with its suitable line
size required.
How It Works:
Your line fluid raises the float in tapered in a Acrylic Tube Area, increases float moves
upward, thereby showing the exact (Increasing) flow in the Acrylic Tube area & it can be
control by the Flow control valve or Needle valve, at the entry point of the rotameter, as per
your asking range.
Available Ranges :
0.10 LPM to 1.00 LPM ( 10 LPH to 60 LPH ) or More or As per Buyer's requirment
Uses:
Low Flow Acrylic Body Rotameter is generally used for measuring the flow range of Air,
Water, Chemical, Gases, Etc.
2. Low Flow Glass Tube
Rotameter
Defination : Low Flow Glass Tube
Rotameter
Low flow Glass Tube Rota meter is a simple and
reliable instruments for reading of continuous
flow rate indication, in the Glass tube area of the
rotameter.
Manufacturing Process:
Low Flow consists of a vertical mounted, calibrated with taperedGlass Tube Rotameter
Glass tube, with float inside and a scale directly calibrated as per flow range. This flow
meters are provided with flow control valve at the entry point, to control the flow , as per
your asking range. It also comes with an Aluminium encased body, to provide safety, to the
Glass tube area.
Flow Control valve :
These flow meters or Low Flow Acrylic Body rotameter, are provided with the Flow control
valve / Needle Valve, at the entry point of the rotameter, to control the flow of the fluid, as
required.
End Connection :
Generally, it comes with a Back or Rear connection, also known as a Inlet & Outlet of the
rotameter, fitted with a Nozzle or Screwed Connection, with your asking line size, required.
How It Works :
Your line fluid raises the float in tapered in a Glass Tube Area, increases float moves upward,
thereby showing the exact (Increasing) flow in the Glass Tube area.The flow can be control
by the Flow Control valve or Needle Valve, at the entry point of the Glass Tube Rotameter,
as per your required asking range.
Available Ranges : 0.10 LPM to 1.00 LPM or more or as per buyer's requirment.
Uses :
Low Flow Glass Tube Rotameter, are generally used for, measuring the flow range of Air,
Water,chemical, Gases, Etc.
3. Low Flow Rotameter
Defination :
The Low Flow Acrylic Body Rotameter in Screwed or
Nozzle Connection , as a top-Bottom or Back Connection,
is a relatively simple & reliable instrument for measuring
the continuous a very Low flow rate indication.
Manufacturing Process:
Acrylic Body is a tapered tube, drilled directly in acrylic body, withLow Flow Rotameter
engraving the Flow rate. In Acrylic Body , flow range is calibrated,Low Flow Rotameter
engraved and colored with black or other colors on Acrylic body itself for long lasting
durability.
Flow Control valve :
These flow meters or Low Flow Acrylic Body rotameter, are provided with the Flow control
valve / Needle Valve, at the entry point of the rotameter, to control the flow of the fluid, as
required.
End Connection :
End-Connection comes as back or rear connection, also known as an Inlet & outlet of the
flow meter or Low Flow Acrylic Body Rotameter, generally fitted with as a Screwed or
Nozzle connection.The end connection comes as a Back or Rear connection, with its suitable
line size required.
How it Works :
Your line fluid raises the float in tapered in a Acrylic Tube Area, increases float moves
upward, thereby showing the exact (Increasing) flow in the Acrylic Tube area & it can be
control by the Flow control valve or Needle valve, at the entry point of the rotameter, as per
your asking range.
Uses :
The Low Flow Acrylic body Rotameter are generally used for measuring the flow range of
Air, Water, Chemical and Gases, etc.
Available Ranges :
0.10 LPM to 1.00 LPM ( 10 LPH to 60 LPH ) or More or As per Buyer's requirment