Hhs en05 system_identification

LESSON 5
SYSTEM IDENTIFICATION

LESSON 5 – SYSTEM IDENTIFICATION

“License for Use” Information
The following lessons and workbooks are open and publicly available under the following
terms and conditions of ISECOM:

All works in the Hacker Highschool project are provided for non-commercial use with
elementary school students, junior high school students, and high school students whether in a
public institution, private institution, or a part of home-schooling. These materials may not be
reproduced for sale in any form. The provision of any class, course, training, or camp with
these materials for which a fee is charged is expressly forbidden without a license including
college classes, university classes, trade-school classes, summer or computer camps, and
similar. To purchase a license, visit the LICENSE section of the Hacker Highschool web page at
www.hackerhighschool.org/license.

The HHS Project is a learning tool and as with any learning tool, the instruction is the influence
of the instructor and not the tool. ISECOM cannot accept responsibility for how any
information herein is applied or abused.

The HHS Project is an open community effort and if you find value in this project, we do ask
you support us through the purchase of a license, a donation, or sponsorship.

All works copyright ISECOM, 2004.

2


Table of Contents
“License for Use” Information.................................................................................................................. 2
Contributors................................................................................................................................................
4
5.0 Introduction..........................................................................................................................................5
5.1 Identifying a Server.............................................................................................................................. 6
5.1.1 Identifying the Owner of a Domain.......................................................................................... 6
5.1.2 Identifying the IP address of a Domain.................................................................................... 6
5.2 Identifying Services.............................................................................................................................. 6
5.2.1 Ping and TraceRoute................................................................................................................... 6
5.2.2 Banner Grabbing......................................................................................................................... 7
5.2.3 Identifying Services from Ports and Protocols.......................................................................... 7
5.3 System Fingerprinting.......................................................................................................................... 9
5.3.1 Scanning Remote Computers.................................................................................................... 9
Further Reading........................................................................................................................................ 12

3


Contributors
Chuck Truett, ISECOM
Marta Barceló, ISECOM
Kim Truett, ISECOM
Pete Herzog, ISECOM

4


5.0 Introduction
It is obvious that someone who sits down at the keyboard of your computer can gather
information about it, including the operating system and the programs that are running, but it
is also possible for someone to use a network connection to gather information about a
remote computer. This lesson will describe some of the ways in which that information can be
gathered. Knowing how this information is gathered will help you to ensure that your local
computer is safe from these activities.

5


5.1 Identifying a Server
There are a number of useful sources on the Web which will allow you to collect information
about domain names and IP addresses.

5.1.1 Identifying the Owner of a Domain
The first step in identifying a remote system is to look at the domain name or IP address. Using
a Whois lookup, you can discover valuable information, including the identity of the owner of
a domain and contact information, which may include addresses and phone numbers. Note
that there are now a number of domain name registrars, and not all whois databases contain
information for all domains. You may have to look at more that one whois database to find
information on the domain that you are investigating.

5.1.2 Identifying the IP address of a Domain
There are a number of ways to determine the IP address of a domain. The address may be
contained in the whois information or you may have to use a DNS or Domain Name Service
lookup. (A web search engine will provide a number of resources for discovering IP addresses
from domain names.)
Once you have the IP address, you can access the records of the various members of the
Number Resource Organization (http://www.arin.net/ or http://www.ripe.net/), to gain
information about how IP addresses are distributed. IP numbers are assigned to service
providers and networks in large groups, and knowing which group an IP address is contained
in, and who has the rights to that group, can be very useful. This can help you determine
information about the server or service provider that a website uses.
Exercises:
Pick a valid domain name and use a Whois lookup to find out who owns that domain.
dominio (http://www.whois.com -> “isecom.org”+Go -> Whois Lookup) What other
information is available? When was the domain created? When will it expire? When was it last
updated?
Find the IP address for this domain name. Using the whois lookups for the various members of
the Number Resource Organization determine who this IP address has been assigned to. (Start
with the www.arin.net, page, which also links to the other members of the NRO.) What is the
range of the other numbers that have also been registered to this entity?

5.2 Identifying Services
Once you have established the owner and the IP address of a domain, then you can start to
look for information about the server to which that domain refers.

5.2.1 Ping and TraceRoute
Now that you know who owns the domain, and who the IP number has been assigned to, you
can check to see if the server that the website is on is actually active. The ping command will
tell you if there is actually a computer associated with that domain or IP. The command
ping domain or
ping ipaddress

6


will tell you if there is an active computer at that address.
If the output of the ping command indicates that the packets sent were received, then you
can assume that the server is active.
Another command, tracert (in Windows) or traceroute (in Linux) will show you the steps that
information takes as it travels from your computer to the remote computer. Tracing the route
that the packets take will sometimes give you additional information about the computers in
the network with the computer that is the target of your trace. For example, computers will
similar IP addresses will often be part of the same network.
Exercises:
Ping a valid website or IP address (ping www.isecom.org or ping 216.92.116.13). If you get a
successful response, ping the next IP address. Did this produce a successful response?
Use tracert or traceroute to trace the route from your local computer to the IP address that
you used in the previous exercise. How many steps does it take? Do any of the listed
computers have similar IP addresses?

5.2.2 Banner Grabbing
The next step in identifying a remote system is to try to connect using telnet and FTP. The
server programs for these services display text messages called banners. A banner may state
clearly and precisely what server program is running. For example, when you connect to an
anonymous FTP server, you might get the following message:
Connected to anon.server.
220 ProFTPD Server (Welcome . . . )
User (anon.server:(none)):
While the number 220 is an FTP code which indicates that the server is ready for a new user,
the text message ProFTPD Server identifies the FTP server program that is running on the
remote computer. Using a web search engine, you can learn what operating system the
program runs on and other details about its requirements, capabilities, limitations, and flaws.
The primary flaw in the use of banner grabbing to gather information about a system is that
clever system administrators can spoof banners. A banner that reads NoneOfYourBusiness
Server is obviously misleading, but a Unix system with a banner that reads WS_FTP Server (a
Windows-based FTP server) is going to complicate any intelligence gathering that may be
done.

5.2.3 Identifying Services from Ports and Protocols
You can also determine what programs are running on a system by looking at what ports are
open and what protocols are in use.
Start by looking at your own local computer. Go to a command line or shell prompt and run
the netstat program using the -a (or all) switch:
netstat -a
The computer will display a list of open ports and some of the services that are using those
ports:
Active Connections

7


Proto Local Address Foreign Address State
TCP YourComputer:microsoft-ds YourComputer:0 LISTENING
TCP YourComputer:1025 YourComputer:0 LISTENING
TCP YourComputer:netbios-ssn YourComputer:0 LISTENING
TCP YourComputer:1110 216.239.57.147:http TIME_WAIT
UDP YourComputer:microsoft-ds *:*
UDP YourComputer:isakmp *:*
UDP YourComputer:1027 *:*
UDP YourComputer:ntp *:*
UDP YourComputer:netbios-ns *:*
UDP YourComputer:netbios-dgm *:*
From this you can see many of the programs and services that are running on your local
computer – many of which you don't even realize are running.
Another program, called fport, provides information similar to that which netstat does, but it
also details which programs are using the open ports and protocols. (Fport is available for free
download from www.foundstone.com.)
Another program, called nmap (for network mapper), will more thoroughly probe your
computer for open ports. When nmap is run, it will display a list of open ports and the services
or protocols that use those ports. It may also be able to determine what operating system
your computer is using. For example, if you run nmap on your local computer, you might see
the following output:
Port State Service
22/tcp open ssh
68/tcp open dhcpclient
139/tcp open netbios-ssn
445/tcp open microsoft-ds
Device type: general purpose
Running: Linux 2.4X|2.5.X
OS details: Linux Kernel 2.4.0 – 2.5.20
Uptime 1.024 days (since Sat Jul 4 12:15:48 2004)
Nmap is available on your Hacker Highschool or L. A. S. cd. It is also available for download
from www.insecure.org.
Exercises:
Run netstat on your local computer, using the -a switch.
netstat -a

8


What ports are open? Using a web search engine, can you match these ports with the
services that run on them? (This would be a good exercise to try at home, also, to see if your
computer is running unnecessary – and potentially dangerous – services, such as FTP and
telnet.)
Run nmap, using the -sS (for SYN Stealth scan), and -O (for guess operating system) switches
and the IP address 127.0.0.1 as the target.
nmap -sS -O 127.0.0.1
The IP address 127.0.0.1 specifies the local host, or your local computer. (Note: this is different
from the IP address that other computers on the internet use to communicate with yours; on
any machine, the IP address 127.0.0.1 refers to the local computer) What open ports does
nmap find? What services and programs are using these ports? Try running nmap while you
have a web browser or telnet client open. Does this change the results?

5.3 System Fingerprinting
Now that you know how to identify a server and how to scan for open ports and use this
information to determine what services are running, you can put this information together to
fingerprint a remote system, establishing the most likely operating system and services that the
remote computer is running.

5.3.1 Scanning Remote Computers
Using an IP address or a domain name other than 127.0.0.1 as an argument for nmap allows
you to scan for open ports on remote computers. It doesn't mean that there will be open
ports, or that you will find them, but it does allow you to try.
For example, imagine that you have been receiving a large amount of spam e-mails, and you
want to discover information about the person who is sending you these e-mails. Looking at
the headers of one of the e-mails, you see that many of the e-mails have originated from the
same IP address: 256.92.116.13 (see Lesson 9: E-mail Security for more details on reading e-
mail headers).
A whois lookup shows you that the address is part of a block assigned to a large ISP, but gives
you no information regarding this particular IP address.
If you then use nmap to scan the computer at that address, you get the following results:
nmap -sS -O 256.92.116.13

Starting nmap 3.50 ( http://www.insecure.org/nmap ) at 2004-07-03 20:13
Eastern Daylight Time
Interesting ports on 256.92.116.13:
(The 1632 ports scanned but not shown below are in state: closed)
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
23/tcp open telnet
25/tcp open smtp
80/tcp open http

9


110/tcp open pop3
113/tcp open auth
135/tcp filtered msrpc
136/tcp filtered profile
137/tcp filtered netbios-ns
138/tcp filtered netbios-dgm
139/tcp filtered netbios-ssn
143/tcp open imap
144/tcp open news
161/tcp filtered snmp
306/tcp open unknown
443/tcp open https
445/tcp filtered microsoft-ds
513/tcp open login
514/tcp open shell
No exact OS matches for host (If you know what OS is running on it, see
http://www.insecure.org/cgi-bin/nmap-submit.cgi).
TCP/IP fingerprint:
SInfo(V=3.50%P=i686-pc-windows-windows%D=7/3%Time=40E74EC0%O=21%C=1)
TSeq(Class=TR%IPID=RD%TS=1000HZ)
T1(Resp=Y%DF=Y%W=FFFF%ACK=S++%Flags=AS%Ops=MNWNNT)
T2(Resp=N)
T3(Resp=N)
T4(Resp=N)
T5(Resp=Y%DF=N%W=0%ACK=S++%Flags=AR%Ops=)
T6(Resp=N)
T7(Resp=N)

Uptime 1.877 days (since Thu Jul 01 23:23:56 2004)

Nmap run completed -- 1 IP address (1 host up) scanned in 775.578 seconds
The ports marked as filtered are well-known as potentially vulnerable to attack, so it is not a
surprise to find them listed as filtered. What is most interesting is that ports 21, 22 and 23 – for
ftp, ssh and telnet – are all listed as open.
The last thing that nmap does is to try to identify the operating system that is running on the
scanned computer. In this instance, the tests that nmap runs are inconclusive, however, since
nmap does show that ftp and telnet services are both running, you can attempt to connect
through each of those to see if there is a banner that will be broadcast.
When you connect through FTP you see a banner that says:

10


220 ftp316.pair.com NcFTPd Server (licensed copy) ready.
When you then connect through telnet, the computer displays a banner which says
FreeBSD/i386 (ttyp7)
A quick web search tells you that NcFTPd is a Unix program and that FreeBSD is a Unix-type
operating system, so it is likely that the server is running a version of FreeBSD as its operating
system. You can't be certain that this is accurate (banners can be spoofed), but you can
accept this as a reasonable guess.
So, by using nmap, along with FTP and telnet, you have determined that the server which has
been sending you spam runs a Unix-type operating system – probably FreeBSD – and is set up
to send and receive a large variety of information, through a number of services including FTP,
telnet, http, smtp and pop3.

11


Further Reading
Nmap: http://www.insecure.org/nmap/
More on Nmap:
http://www.networkmagazine.com/shared/article/showArticle.jhtml?articleId=8702942&classr
oom=
Fport:http://www.foundstone.com/index.htm?subnav=resources/navigation.htm&subcontent
=/resources/proddesc/fport.htm
A number of site detailing ports and the services that use them:
http://www.chebucto.ns.ca/~rakerman/port-table.html
http://www.chebucto.ns.ca/~rakerman/port-table.html#IANA
http://www.iana.org/assignments/port-numbers
http://www.networksorcery.com/enp/protocol/ip/ports00000.htm
Various DNS lookups: http://www.dnsstuff.com/
Ping:http://www.freesoft.org/CIE/Topics/53.htm

12

Hhs en05 system_identification

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Semelhante a Hhs en05 system_identification

Semelhante a Hhs en05 system_identification (20)

Último

Último (20)

Hhs en05 system_identification