Five Reasons to Adopt Layer 2 Ethernet Switching Over DWDM Networks Now
1. Five Reasons to Adopt Layer 2
Ethernet Switching Over
DWDM Networks Now
A white paper issued by:
Siemens® Networks
Dr. Hans-Juergen Schmidtke, VP of Optical Transport
Alan Gibbemeyer, Director, Next Generation Networks BU
2. Executive Summary
A new network is emerging for delivering media-rich and bandwidth-hungry content,
applications and services. Traditional SONET (Synchronous Optical NETwork)/SDH
(Synchronous Digital Hierarchy) architectures, developed for the narrowband world of a
generation ago, are overloaded. Such practices as stacking SONET/SDH rings to
increase capacity are complex and costly, while Ethernet-over-SONET/SDH protocol
A Metro
conversions waste tremendous bandwidth. Ethernet
Forum (MEF)
study
With data traffic exploding and now dwarfing the Time Division Multiplexing (TDM)-based
suggests that
demands, a move to pure packet-based transport over Dense Wavelength Division an Ethernet-
Multiplexing (DWDM) has significant economic benefit by avoiding packet to TDM over-optical
network costs
conversions at each node. In addition, newer protocols such as Gigabit Ethernet (GigE),
about half as
10GigE and Fibre Channel are coming forward alongside advances in smart DWDM much to
technology. operate as a
legacy
SONET/SDH
Together, these advances offer increased flexibility, reduced operational complexity and
one.
lower equipment costs compared with today’s widespread SONET/SDH infrastructure. In
fact, a Metro Ethernet Forum (MEF) study suggests that an Ethernet–over-optical
network costs about half as much to operate as a legacy SONET/SDH one.
Aside from its high bandwidth capacity, DWDM’s key advantages are its ability to easily
transport these newer data protocols and effectively collapse current network overlays by
eliminating optical-electrical-optical (O-E-O) conversions. OEO conversions are the
major cost drivers in today’s transport network, both in terms of investment CAPEX, as
well as the long-run operational costs. From a topology and service delivery point of view,
meshed capable Ethernet and meshed DWDM layer is the perfect match.
Siemens® Ethernet Switching Over DWDM Page 2 of 18
4. This paper identifies five compelling reasons service providers should consider
implementing Layer 2 Ethernet Switching over DWDM now:
1. Eliminate Network Layers While Reducing Complexities and Equipment
Costs
2. Improve Resource Use to Achieve Optimal Bandwidth Efficiency
3. Simplify End-to-End Provisioning to Speed Time to Market
4. Automate Network Management for Scalability and Reduced Operating
Expenses
5. Detect Problems Automatically and Resolve Them Faster Across the Entire
Network
By combining packet-processing intelligence and optical-wavelength assignment into a
single, unified system – e.g., Layer 2 Ethernet Switching over DWDM – service providers
can achieve significant operational savings, make better use of their resources, achieve
optimal bandwidth efficiency and gain nearly limitless scalability. These advantages make
a business case for DWDM especially compelling for metro and regional applications,
and for network operators who may have considered DWDM solely a long-haul transport
technology.
In effect, the price-performance of Layer 2 Ethernet Switching over DWDM can help
service providers deliver content, services, and applications more cost-effectively, while
sharpening their competitive edge and reducing customer churn.
Siemens® Ethernet Switching Over DWDM Page 4 of 18
5. Table of Contents
1. Situation Analysis ................................................................................................6
2. Five Reasons to Adopt Layer 2 Switching Over DWDM.................................10
#1: Eliminate Network Layers While Reducing Complexities and Equipment
Costs ..............................................................................................................11
#2: Improve Resource Use to Achieve Optimal Bandwidth Efficiency ................12
#3: Simplify End-to-End Provisioning to Speed Time to Market ..........................13
#4: Automate Network Management for Scalability and Reduced Operating
Expenses .......................................................................................................15
#5: Detect Problems Automatically and Resolve Them Faster Across the Entire
Network ..........................................................................................................16
3. Conclusion ..........................................................................................................16
4. Abbreviations and Acronyms............................................................................18
Siemens® Ethernet Switching Over DWDM Page 5 of 18
6. 1. Situation Analysis
A dynamic market shift is taking place toward a much richer and increasingly
personalized everything-on-demand information, communications, and entertainment
environment. Fully realized, this environment will enable consumers and businesses to
access whatever content, applications, and services they want – whenever and wherever
they want them.
So what do they want? New and exciting IP-based content, applications and services
such as IPTV (Internet Protocol TV); Video on Demand (VOD); triple-play voice, data and
video; the so-called smart home; 3G/mobility; IP video telephony; multi-player network-
based gaming and more.
Ethernet on the rise
Of course, all this generates packet traffic – Ethernet, more and more – that needs
massive and independently scalable real-time ingest and streaming capabilities, along
with colossal storage capacities. Plus, it needs ingest and streaming to be separated for
the sake of efficiency and Quality of Service (QoS) / Quality of Experience (QoE)
guarantees.
In response, service providers are building out their metro and regional networks to
handle today’s demands while both supporting legacy TDM services and keeping an eye
on tomorrow’s needs. Service providers have quickly realized the legacy technologies in
today’s Metro Area Networks (MANs) lack the dynamic functionality and scalability to
handle the ever-increasing bandwidth demands from the access network at the requisite
QoS / QoE level.
Siemens® Ethernet Switching Over DWDM Page 6 of 18
7. These new IP-based services and applications require a flexible transport infrastructure
to handle their unique network demands and requirements. For example, they require
massive real-time ingest capabilities as well as the separation and independent scaling of
streaming/ingest and storage capacity.
The challenge
The challenge that service providers are faced with is finding the right carrier-grade that service
network elements or “building blocks” that offer cost-efficiency, simplified operations and providers are
faced with is
scalability to meet the exponentially increasing bandwidth demands resulting from the
finding the
adoption of these new services. Operators have to figure out how to cost-effectively right carrier-
move these multiple-service offerings without compromising operational efficiency. grade network
elements or
“building
DWDM on the march blocks” that
In order to remain competitive today, service providers need to move away from legacy offer cost-
efficiency,
transport networks such as SONET/SDH and Frame Relay toward highly reliable and
simplified
intelligent DWDM networks. DWDM transport networks reduce fiber requirements by operations and
unlocking the embedded capacity of existing fiber infrastructures. The idea is to use fiber scalability to
meet the
- not to transmit signals just on a single wavelength - but to convey them through the
exponentially
same fiber over multiple wavelengths to better utilize almost unlimited fiber-optic increasing
capacity. bandwidth
demands
resulting from
After a long period of stagnation and decline in the last years, demand for optical the adoption
equipment is now rapidly accelerating again as service providers around the world have of these new
services.
begun to consume the excess network capacity that resulted from the massive network
expansion they began in the mid-1990s, and are starting projects to leverage recent
technological advances to deliver on the promise of everything-on-demand and the
increasingly high-definition, personalized TV.
Siemens® Ethernet Switching Over DWDM Page 7 of 18
8. The next graph illustrates the continuous rapid sales growth of Wave Division
Multiplexing gear in North America from the latest Infonetics Research.
North Am erica Metro WDM Revenue
(USD Million)*
700
600
500
400
300
200
100
- Even service
CY 2003 CY 2004 CY 2005 providers who
traditionally
did not need
*Source: Infonetics Research
DWDM
networks
The reason for this strong growth is that DWDM offers greater transport and should
consider them
operational efficiencies. Because of its bit-rate and protocol-independent nature,
today in order
service providers can collapse current overlays and seamlessly support the
to deliver
increasingly ubiquitous newer low-cost protocols, such as GigE and 10 GigE, in their these new,
media-rich
native formats. Even service providers who traditionally did not need DWDM networks
content,
should consider them today in order to deliver these new, media-rich content,
applications,
applications, and services in a cost-effective and reliable way. Otherwise, they risk and services
in a cost-
their ability to play in this new world of everything on demand and personalized user
effective and
experiences.
reliable way.
A DWDM network, when combined with Layer 2 Ethernet switches, enables service
providers to achieve operational efficiencies and savings while also positioning
themselves for future revenue-generating services.
Siemens® Ethernet Switching Over DWDM Page 8 of 18
9. The cost savings of a DWDM network, when combined with GigE and wire-speed Layer 2
Ethernet switches, are significant. According to a Metro Ethernet Forum (MEF) study
based on a three-year build-out of a medium-sized metro area network, a network based
on optical Ethernet design principles costs 49 percent less to operate than a legacy
SONET/SDH-based network.1
From the network economics analysis that Siemens has performed to date, we estimate
the capital savings potential of L2 Ethernet over DWDM to be approximately 40-45
percent, assuming that 20 percent of the cost is attributed to access and 80 percent to
core optics. A recent detailed study suggested that 70 percent capital savings is possible
when Carrier Ethernet replaces legacy ATM access networks.
Capital expenditure savings when an automated DWDM replaces
a legacy transport network.
On the optical core side, about 30 percent in capital savings can be realized when an
automated DWDM regime replaces a legacy transport network. The savings come from
1
Billing World and OSS Today, January 2006, “Metro Ethernet Finally Delivers.”
Siemens® Ethernet Switching Over DWDM Page 9 of 18
10. reduced optical-electrical-optical (O-E-O) conversion plus the initial build capital reduction
due to future-proof and scalable network design. On top of the capital savings, human
effort is also reduced for service provisioning and operations, resulting in an up to 80
percent savings of operational expenses over time.
In addition, significant technology advancements are occurring in the areas of intelligent
optical DWDM line systems. These include systems incorporating ROADMs
(Reconfigurable Optical Add-Drop Multiplexers), which more than make up for their cost
by eliminating the need for costly O-E-O conversions, and even PXCs (Photonic Cross
Connect) that enable a transparent optical mesh architecture. Another big advancement
comes from distributed control mechanisms like Generalized Multi-protocol Label
Switching (GMPLS) that help provide intelligent management of data capacity and
throughput. Together these innovations can provide increased flexibility, reduced
operational complexity, and lower equipment costs through the reduction of DWDM
transport network components.
A completely integrated network employing Layer 2 Ethernet Switching over DWDM
allows for dynamic data capacity and throughput sharing/distribution across multiple
server ports, blades and complexes. This results in an inherently more reliable and
scalable system able to handle tomorrow’s ever-growing bandwidth demands most cost
effectively.
2. Five Reasons to Adopt Layer 2 Switching Over DWDM
Whether networks are TDM-based or packet-based, Layer 2 Ethernet switching can be
integrated with DWDM optical transport systems to cut costs, make better use of network
resources and provide simple end-to-end provisioning.
Siemens® Ethernet Switching Over DWDM Page 10 of 18
11. Although there are many reasons to adopt Layer 2 Ethernet Switching over DWDM, the
top five most compelling reasons why service providers should consider deploying this
next generation optical network technology today are as follows:
#1: Eliminate Network Layers While Reducing Complexities and Equipment
Costs
A DWDM optical transport network can extend from the core to the edge and access
networks. ROADMs can eliminate the complex O-E-O layer, thereby reducing the number
of network elements. For example, traffic that needs switching or routing can be dropped
to an appropriate device while traffic that does not benefit from a sub-lambda packet
processing can be optically switched. In effect, this collapsing of the optical network
layers dramatically reduces network complexities and operating costs.
Now add to that carrier-grade Layer 2 Ethernet for transport, aggregation, and switching.
Carrier Ethernet has proven to reduce costs in terms of capital expenses as well as
operating expenses without compromising the availability of the delivered services and
QoS. Especially effective is this packet-based technology, due to the fact that the next
generation network applications are typically native packet-based applications. A costly
transformation from packet to TDM and back is being avoided and a full layer of
transformation is eliminated.
For example, putting carrier-grade Ethernet over DWDM allows for a very cost-optimized
solution, such as the ideal placement of aggregation and grooming sites to share the
resources in the optical and electrical layers, minimizing wavelength usage. Again, it
requires less network elements and therefore is much easier to manage and operate.
Siemens® Ethernet Switching Over DWDM Page 11 of 18
14. to-end provisioning – from network planning to the final step of verifying a Service Level
Agreement (SLA), offering minimal fault-prone human intervention.
With a
With a collapsed network, planning and configuration tools are linked via software simplified end-
interfaces to make sure the link is installed exactly as planned. Work orders are issued to-end
provisioning
automatically and sent from the network manager down to the network elements.
system,
Reconfiguration or installation of new channels is done continuously within the software service
suite while SLA data can be monitored and logged automatically and verified via the providers can
offer the
network.
highest
service
Example of ease of use – availability to
HiT 7300 can provision a new wavelength by noon
increase
Today’s w/ simplified
process end-to-end customer
provisioning satisfaction
Customer request
Days <2h
and reduce
churn, while
achieving
Hardware Days <2h
record-setting,
time-to-market
Automation Days <5min goals with new
Implement service in network management services.
Days <5min
Switch on service & clear for customer
Faster time to market, faster return on investment
Page 1 August-06
Example of a simplified end-to-end provisioning system
for Layer 2 over DWDM Networks.
With a simplified end-to-end provisioning system, service providers can offer the highest
service availability to increase customer satisfaction and reduce churn, while achieving
record-setting, time-to-market goals with new services.
Siemens® Ethernet Switching Over DWDM Page 14 of 18
15. #4: Automate Network Management for Scalability and Reduced Operating
Expenses
A single, automated network management system within a Layer 2 Ethernet over DWDM
network can provide full support for all management tasks from the element layer to the
service layer, as well as an overall network view of the complete next generation optical
network.
The system should be able to scale within wide limits to provide customized and cost-
optimized network management solutions. This “pay-as-you-grow” concept allows
operators to start with a cost-effective system and gradually add more growth as the
network demand increases.
It should also support the new generation Multi-service Provisioning Platform (MSPP)
networks, and should be flexible enough to stand alone or be integrated into the NMS
(Network Management System), thus providing a seamless extension of the existing
management network.
In order to support SONET and SDH interfaces, TDM circuit emulation support is
required. Data layer management – Layer 2 switches, for example – Virtual Local Area
Networks (VLANs) or Resilient Packet Ring (RPR) networks are handled within a single
network management platform.
By supporting open and standard interfaces, the network management system can be
integrated into virtually any high or low-level management system, allowing for further
reduction in operating expenses.
Siemens® Ethernet Switching Over DWDM Page 15 of 18
16. #5: Detect Problems Automatically and Resolve Them Faster Across the Entire
Network
With a Layer 2 Ethernet over DWDM network, a much higher resiliency and drastically
simplified operations can be achieved. An integrated solution can support very intelligent
protection mechanisms with shared protection over different OSI layers.
In addition, enhanced alarm correlation and troubleshooting simplify the network-level for
root-cause determination and problem resolution across the entire DWDM network. For
example, a dropped signal typically causes alarms to go off everywhere in the network –
across amplifiers, multiplexers, transponders, and other network elements. A collapsed
network is able to correlate and isolate the problem to the direct source much faster,
eliminating unnecessary alarms in the network and resolving problems more quickly. It
also immediately pinpoints critical issues with powerful alarm logging, alarm filtering,
repetitive alarm suppression, and intelligent root-cause alarm correlation functions across
packet and optical domains.
3. Conclusion
The industry is rapidly moving toward a bandwidth-intensive, multi-service world; and with
service providers increasingly reaching their network capacity, they are struggling with
how to cost-effectively deliver on the promise of these new services and applications
without compromising operational efficiency.
Over the past five years, many service providers have deployed DWDM networks as the
underlying and enabling Layer 0/1 optical technology, which lets them collapse current
overlays and easily support new low-cost protocols, such as GigE/10 GigE and Fibre
Channel, in their native formats.
While it may seem obvious that the network demand is moving to Layer 2 or IP over
DWDM, there are problems in network migration for service providers. Circuit emulation
Siemens® Ethernet Switching Over DWDM Page 16 of 18
17. with Ethernet/IP transport or overlay packet and TDM with TDM as the transport
technology are the two main options available to maintain legacy services. The tendency
is moving toward circuit emulation for the best economic solution.
The DWDM transport network, combined with Layer 2 Ethernet switching allows for
unprecedented dynamic data capacity and throughput sharing and distribution across
multiple ports, blades and complexes, and drastically improved resiliency and availability.
The Layer 2 Ethernet packet switch technology is especially optimized for the next
generation network traffic that is dominantly and natively packet-based.
These capabilities enable service providers to drastically cut equipment and operational
costs; reduce complexities in the network by eliminating/collapsing layers within the
network; make better use of network resources to achieve optimal bandwidth efficiency;
offer the highest service availability through a single-automated network management
approach that gives an overall view of the complete next generation optical network; and
easily scale to handle tomorrow’s nearly limitless bandwidth demands.
Siemens® Ethernet Switching Over DWDM Page 17 of 18
18. 4. Abbreviations and Acronyms
CAPEX Capital Expenditures
DCC Data Communications Channel
DWDM Dense Wavelength Division Multiplexing
GigE Gigabit Ethernet
GMPLS Generalized Multi-protocol Label Switching
IP Internet Protocol
IPTV Internet Protocol TV
LER Label Edge Router
LSR Label Switched Router
MAN Metro Area Network
MEF Metro Ethernet Forum
MSPP Multi-service Provisioning Platform
NMS Network Management System
O-E-O Optical in Electrical processing Optical out
OPEX Operational Expenditures
PXC Photonic Cross Connect
QoS Quality of Service
QoE Quality of Experience
RPR Resilient Packet Ring
ROADM Reconfigurable Optical Add-Drop Multiplexer
SDH Synchronous Digital Hierarchy
SLA Service Level Agreement
SONET Synchronous Optical NETwork
TDM Time Division Multiplexing
TNMS Telecommunications Management System
VLAN Virtual Local Area Network
VOD Video on Demand
Siemens® Ethernet Switching Over DWDM Page 18 of 18
19. Appendix: The Siemens® Family of Integrated Layer 2 over DWDM Products
The Siemens family of integrated Layer 2 switching over DWDM products are based on
Siemens' SURPASS® Transparent Optical Networks solution (including the SURPASS
hiT 7300 and SURPASS hiD 6630/50/70 series DWDM platforms, and the TNMS network
management system), enabling the roll-out of high-bandwidth, flexible, and scalable
networks.
Next Generation Multi-haul DWDM Platform – SURPASS hiT 7300
The SURPASS hiT 7300 is a flexible and cost-efficient 40-channel DWDM transport
platform optimized for high-capacity transport within regional and long-haul networks. It
is designed and optimized for bit rates of 2.5 Gbit/s, 10 Gbit/s and 40 Gbit/s per
wavelength. SURPASS hiT 7300’s key building blocks include terminal, optical line
repeaters, OADMs, and ROADMs that allow for tailored solutions for any kind of network
size and architecture. It offers a full range of transponders, enabling Ethernet (GigE and
10 GigE), SAN, TDM and OTH services.
SURPASS hiT 7300 offers comprehensive automation and customization of network
handling within one common DWDM platform, which drastically reduces operational costs
and speeds return on investment. This next-generation multi-haul DWDM platform also
offers a high degree of modularity, enabling an easily scalable, pay-as-you-grow strategy
and guaranteeing a fast return on investment.
Carrier Ethernet Switches – SURPASS hiD 6630/50/70 Series
The Carrier Ethernet switches platform – the SURPASS hiD 6630/50/70 series – is
designed to meet the requirements of metro aggregation and metro core carrier grade
networks. It includes industry-leading traffic management, enabling service providers to
offer revenue-generating quality services to their customers on a DWDM converged
network, backed by guaranteed SLA delivery. Siemens’ family of Carrier Ethernet
switches have been certified as compliant with specification 14 of the Metro Ethernet
Forum.
Automated Network Management System – TNMS (Telecommunications Network
Management System)
TNMS is the management system for next generation optics. It provides an easy-to-
understand overall network view and simple network navigation coupled with uniform
fault, configuration and security, and performance management. The TNMS carries out
all common management functions in the element, network, and service layer extremely
efficiently. By supporting open and standard interfaces, TNMS can be easily integrated
into different management network scenarios, allowing for further reduction in operating
expenses. Its ergonomically designed and intuitive user interface creates a new
dimension in operating convenience, resulting in higher efficiency, error-free routine
operations and reduced staff training time – and lowering over all costs and operating
expenses.
Siemens® Ethernet Switching Over DWDM Page 19 of 18