This document provides information about M/s V.P. Engineering Works, including a list of their machinery, the specifications of their CNC turning center, tooling equipment, and available facilities. They have 2 MACPOWER CNC machines, 1 BFW VMC, 7 center lathes of various sizes, 2 drilling machines, and 1 milling machine. The CNC turning center has a 350mm swing, 500mm max turning length, and can process parts up to 350mm in diameter. Quality control procedures are documented and include gauge calibration, in-process inspections, and 100% inspection records.
MAHA Global and IPR: Do Actions Speak Louder Than Words?
CNC Machining Company with Lathes, Mills and Precision Capabilities
1. M/s V.P. ENGINEERING
WORKS
PRECISION JOB WORKS & ALL TIPES OF CNC MACHINING
LIST OF MACHINERY:
SR. PARTICULARS MAKE CAPACITY QTY
NO.
1 C.N.C. MACPOWER 350 * 600 2
2 V.M.C. BFW 450 * 600 *550 1
3 CENTER LATHE SHEETAL 6 Feet bed 14” 7
Rajkot Chuck 3 HP
4 CENTER LATHE Maysor Kirloskar 8 Feet bed 10” 2
Chuck
5 DRILLING MACHINE M.E.W 0—1 INC 2
6 MILLING MACHINE No.2 1
Overall Specification of CNC Turning Center:
1. Capacity:
i) Swing over Bed mm 350
ii) Maximum Turning Length mm 500
iii) Standard Turning Dia. mm 320
iv) Maximum Turning Dia mm 350
2. Slides:
i) X axis travel mm 320
ii) Longitudinal (Z axis) mm 500
iii) Rapid Feed M/min 24
(X & Z axis)
3. Main Spindle:
i) Spindle Motor Cont/30 9/11
Power min. Kw
ii) Spindle Bore mm 60
iii) Spindle Nose A26
iv) Max Bar Capacity mm 52
v) Spindle Speed range rpm 50-4000
vi) Full power Range rpm 750-4000
2. M/s V.P. ENGINEERING
WORKS
PRECISION JOB WORKS & ALL TIPES OF CNC MACHINING
4. High Speed Servo Turret:
SUPER 200 machine is equipped with high speed and high precision Bi- directional
Servo Turret with hydraulic clamping system. Tool change time is just 0.5 seconds.
i) Number of Station 8
ii) Max Boring Bar Dia mm 40
iii) Tool Size mm 25 X 25
5. Tailstock:
i) Quill Diameter mm 80
ii) Quill Stroke mm 100
iii) Thrust (adjustable) Kgf (Max) 300
6. Accuracy:
(AsperVD/DGGQ3441)
i) Positioning mm 0.015
ii) Repeatability mm +/- 0.003
Item Handled:
SR.NO. PART NAME
1) PULLEY
2) REAR COVER
3) HUB FRONT WHEEL
4) TOP COVER
5) HOUSING
6) VALKAN RING
7) HOUSING JCB
8) STATER SUPPORT
09) BREAK DRUM INDICA
10) SANTRO FLY WHEEL
3. EQUIPMENTS:
M/s V.P. ENGINEERING
WORKS
PRECISION JOB WORKS & ALL TIPES OF CNC MACHINING
SRNO PARTICULARS MAKE SIZE
18-35 MM,
1 BORE DIAL GUAGE MITUTOYO 35-60 MM,
50-150MM.
2 MICROMETER MITUTOYO 0-300
0-25 MM,
3 MICROMETER MITUTOYO/ 0-150 MM,
BAKER 50-75 MM,
75-100 MM.
4 DIAL CALLIPAR VERNIAR Mitutoyo 12”
5 CALLIPEAR VERNIAR Mitutoyo 6”, 8”, 12”, 24”,
6 DEPTH VERNIAR Mitutoyo 8”,12”
7 REDIOUS GAUGE ---------
8 DEGREE PROCTOER ----------
9 INNER COMPASS, OUTER ---------
COMPASS
10 HIGHT GAUGE Mitutoyo 12”
11 SURFACE PLATE SED
Note: Above equipments have been purchased taking into consideration our current
Job orders. We are ready to purchase any other required
equipment for your
Specific job order.
4. M/s V.P. ENGINEERING
WORKS
PRECISION JOB WORKS & ALL TIPES OF CNC MACHINING
DD
Dveloping of jigs & fixtures:
We have independently developed jigs & fixtures in house for above items &
We have capacity to develop any kind of jigs & fixtures for your specific job orders.
Locally Facilities Available:
a) Foundry Facility (Both induction & cupola)
b) Heat Treatment
i) Salt Bath
ii) Induction Hardening
iii) Normalizing, Tempering, Annealing
c) Chemical Analysis
d) Micro Structure
e) Press Work
f) Plating
g) Slotting, Milling, Gear Cutting, Shaping etc.
h) Grinding, internal Grinding, Surface Grinding etc.
i) Balancing up to 50kgs
QUALITY SYSTEM:
1. Periodic checking of gauges & record maintained.
2. Our supervisor does stages inspection.
3. Process chart displayed.
4. Control plans are displayed.
5. Work instruction are given to each and every worker and displayed
Near to each machine.
6. Every lot of job is inspected and records are maintained 100/0 of jobs.