1. Copper Weld-thru Primer self-Etching Primer
reduces metal distortion is for excellent
Copper Weld-Thru Primer is adhesion
designed to eliminate the corrosion • True acid-etching formulation
that forms between welded sticks to virtually any clean
substrates. The copper provides bare metal
• Enhances adhesion and
excellent adhesion and superior
durability of most non-
conductive properties that minimize epoxy top coats
the heat zone, thereby reducing • Available in easy-to-use
distortion and welding spatter. aerosol cans or economical
11281Z Eastwood Copper quarts. Etch and prime bare,
Weld-Thru Primer, rust-free metal in one step.
Aerosol $19.99 Saves time, adheres to steel,
3 or more $19.49 each aluminum, stainless steel,
and scuffed galvanized steel.
Prevent rust, even on Compatible with most paint
ready-to-weld subassemblies or auto finishes. Bonds better to bare metals than other primers. Enhances
adhesion of non-epoxy topcoats. Great base for high-build primers or spot
stored outdoors repairs. Quarts pre-thinned for spraying. Not for use under Chassis Black.
Bloxide is a weldable rust
16014Z Self-Etching Primer, Gray, Aerosol 16 oz. $14.99 3 or more $14.49 each
preventative that ensures x-ray
16009ZP Self-Etching Primer, Gray, Quart $19.99 3 or more $19.49 each
quality welds. The 16108ZP Self-Etching Primer, Gray, Gallon $69.99
aluminized coating 16114Z Self-Etching Primer Black, Aerosol 16 oz. $14.99 3 or more $14.49 each
acts as an oxygen 16109ZP Self-Etching Primer Black, Quart $19.99 3 or more $19.49 each
barrier that protects
against rust. It also
forms aluminum Dissolve rust in one easy step
oxide in the weld with Eastwood’s Fast Etch!
puddle which reduces The Fast Etch one-step process effectively
porosity and pin-holing. dissolves rust and leaves a protective zinc-
The use of Bloxide® eliminates re-cleaning of phosphate coating on the surface. Spray, brush,
subassemblies prepared for welding even after wipe or dip Fast Etch onto rusted parts; then
they have been in outside storage for several for maximum results, wipe treated parts with
months. It is an excellent weldable primer paint. Eastwood’s PRE (10041Z) to neutralize the Fast
16050Z Bloxide Aerosol, Etch. Fast Etch is an excellent metal prep for
net wt. 12 oz. $30.99 powder coating and painting. One gallon will
3 or more $30.49 each
16055ZP Bloxide, Quart $20.99
treat 200-300 square feet of metal. Also available
3 or more $20.49 each in Gel for vertical and overhead surfaces.
51080ZP Bloxide, Gallon $69.99 19416Z 16 Fl. oz Bottle $15.99 20558ZP 1 Gallon Gel $38.99
19418ZP 1 Gallon Bottle $36.99 21721ZP 5 Gallon $149.99*
*Special shipping charges may apply
Cold galvanizing prevents
rust on bare steel
Formulated with 93% pure zinc. NEW stop
Will deter rust even if scratched.
Ideal for use on bare steel and inside
rust from the
surfaces of body panels to provide inside out
long-lasting rust protection. Not for Formulated with tough
use as a primer. Phenolic resin that
16006Z Cold Galvanizing penetrates, converts and
Leaves a
Compound, Aerosol, encapsulates the rust dull-green
13 oz. $12.99 on the internal frame protective
3 or more $12.49 each surface. The addition of coating
Zinc Phosphate in the
High Build Primer is coating seals the surface
great for spot repairs and assures no future
corrosion will occur.
If you’ve ever block sanded down
The viscosity is formulated to assure “creep” and penetration under even the
to bare metal, here’s an easy way to
heaviest of surface rust. This is a must-have coating for any frame or subframe.
touch up. SEM’s High Build Primer
If not treated the exposed metal surface will continue to rust and begin to show
Surfacer provides superior adhesion
as paint flaking, pin holes or even worse – structural frame failure. Included
with fast film build and flexibility
with each can is our 18” long “Conical Nozzle” that applies a radial spray
when priming steel, aluminum,
pattern to assure complete coverage. Simply insert the nozzle into openings,
urethane, plastic and other similar
bolt holes, etc. and spray. It’s that easy! 2 cans will coat a standard size
surfaces. Sands easily with 320 - 400
frame – we recommend 3 for truck frames.
grit. One aerosol covers about 15 square feet.
12515Z Eastwood Internal Frame Coating, 14 oz. Aerosol $19.99
50056Z SEM High Build Primer $15.99
Order toll-free 800-345-1178 rust sOlutiOns 63