ReportsnReports – Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

ReportsnReports.com adds iData Research Market Research Report “Asia Pacific Markets for
Dental Prosthetics and CAD/CAM 2011’’ to its store.
In 2010, the total Asia-Pacific markets for dental prosthetics (made up of Japan, South
Korea and Australia) were valued at $6.4 billion, a 0.1% increase over the previous year.
The overall market CAD/CAM Prosthetics is estimated to grow at a double-digit rate over the
forecast period.

The market segments covered in this report include:
Crowns,
Bridges,
Inlays/Onlays,
Veneers,
Dentures,
CAD/CAM System,
CAD/CAM Prosthetics,
CAD/CAM Blocks
Within the dental prosthetics and CAD/CAM market, companies such as Sirona, Nobel
Biocare, 3M Espe and Degudent lead the market, among many others. This report provides
a comprehensive and detailed analysis of market revenues by device type, market forecasts
through 2017, unit sales, average selling prices, market drivers and limiters and a detailed
competitive analysis, including manufacturer market shares and product portfolios.

TABLE OF CONTENTS
LIST OF FIGURES
LIST OF CHARTS
EXECUTIVE SUMMARY
1.1 TOTAL ASIA-PACIFIC DENTAL PROSTHETICS AND CAD/CAM DEVICE MARKET
1.2 CAD/CAM PROSTHETICS MARKET
1.3 CAD/CAM BLOCK MARKET
1.4 TREND ANALYSIS BY COUNTRY
1.5 TREND ANALYSIS BY SEGMENT
1.6 DENTURE MARKET
1.7 CAD/CAM SYSTEM MARKET
1.8 COMPETITIVE ANALYSIS

RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’ S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities

Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring

INTRODUCTION TO DENTAL PROSTHETICS
3.1 DENTAL HEALTH STATISTICS IN ASIA-PACIFIC
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.2.1 Material Types
3.2.3 Inlays/Onlays
3.2.4 Veneers
3.2.5 Dentures
3.2.5.1 Full Dentures.
3.2.5.2 Partial Dentures
3.2.6 Manufacturing Process and Technological Developments
3.2.6.1 Conventional Fabrication
3.2.6.2 CAD/CAM Technology
3.2.6.3 Rapid Prototyping
3.2.6.4 Intra-Oral Digital Impression-Taking

ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET OVERVIEW
4.4 MARKET ANALYSIS AND FORECAST
4.5 MARKET BY SEGMENT
4.5.1 Crown and Bridge Market
4.5.1.1 CAD/CAM Prosthetics Market
4.5.2 Denture Market
4.5.3 CAD/CAM System Market
4.5.3.1 Full In-Lab CAD/CAM System Market
4.5.3.2 Standalone Scanner CAD/CAM System Market
4.5.3.3 Chairside CAD/CAM System Market
4.6 TREND ANALYSIS BY SEGMENT
4.7 MARKET DRIVERS AND LIMITERS
4.7.1 Total Dental Prosthetics Market
4.7.1.1 Market Drivers
4.7.1.2 Market Limiters

4.8.1 CAD/CAM Prosthetics Market
4.8.1.1 In-Lab CAD/CAM Prosthetics.
4.8.1.2 Chairside CAD/CAM Prosthetics Market
4.9.1 Introduction
4.9.2 Market Overview
4.9.3 CAD/CAM Block Market By Unit Type
4.9.3.1 Zirconia
4.9.3.2 Porcelain
4.9.3.3 Acrylic
4.9.3.4 Metal
4.10 MERGERS AND ACQUISITIONS
4.10.1 Market Highlights

COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 Median Age
5.1.3 GDP per Capita
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
5.1.5 Price Index
5.2 ASIA-PACIFIC DENTAL PROSTHETICS PER CAPITA SUMMARY
5.3 JAPAN
5.4 SOUTH KOREA
5.5 AUSTRALIA
5.6 DENTISTS PER POPULATION

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 93
6.1 INTRODUCTION
6.2MARKET ANALYSIS AND FORECAST
6.2.1 Dental Prosthetic Device Market
6.2.2.1 Porcelain-Fused Metal (PFM) Device Market
6.2.2.2 Full-Cast Device Market
6.2.2.3 All-Ceramic Device Market.
6.2.2.4 Hard-Resin Device Market
6.2.3.2 In-Lab CAD/CAM Prosthetics Market
6.2.4.1 Full Denture Market
6.2.4.2 Partial Denture Market
6.2.5.1 Full In-Lab CAD/CAM System Market.

6.4.2.3 Chairside CAD/CAM System Market Sirona
6.5.2 : CAD/CAM Block Market by Material Type
6.5.2.1 Zirconia
6.5.2.2 Porcelain
6.5.2.3 Acrylic
6.5.2.4 Metal

SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
7.1 INTRODUCTION
7.2.2.1 Porcelain-Fused Metal Market
7.2.2.2 Full-Cast Market
7.2.2.3 All-Ceramic Market
7.2.3.1 Chairside CAD/CAM Prosthetics
7.3.1 Total Dental Prosthetic Device Market

7.4.2 Total CAD/CAM System Market
7.5.1 Introduction
7.5.2 CAD/CAM Block Market
7.5.3 CAD/CAM Block Market by Material Type
7.5.3.1 Zirconia
7.5.3.2 Porcelain
7.5.3.3 Acrylic
7.5.3.4 Metal

AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
8.1 INTRODUCTION
8.2.2.1 Porcelain-Fused Metal Market
8.2.2.2 Full-Cast Market
8.2.2.3 All-Ceramic Device Market.
8.2.5.1 Full In-Lab CAD/CAM System Market

8.4.2.1 Full In-Lab System Market
8.5.2 CAD/CAM Block Market by Material Type
8.5.2.1 Zirconia
8.5.2.2 Porcelain
8.5.2.3 Acrylic
8.5.2.4 Metal

ABBREVIATIONS
LIST OF FIGURES
EXECUTIVE SUMMARY
Figure 4-1: Exchanges Rates for the U.SDollar, 2010
Figure 4-2: Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017
(US$M)
Figure 4-3: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-4: Crown and Bridge Units Sold by Material Type, Asia-Pacific, 2007 – 2017
Figure 4-5: Crown and Bridge Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-6: CAD/CAM Prosthetics Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-7: Denture Units Sold by Type, Asia-Pacific, 2007 – 2017
Figure 4-8: Denture Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-9: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-10: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-11: Standalone Scanner CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-12: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-13: Growth Rates by Segment, Total Dental Prosthetic and CAD/CAM Device
Market, Asia-Pacific, 2007 – 2017
Figure 4-14: Drivers and Limiters, Total Dental Prosthetics Market, Asia-Pacific, 2010
Figure 4-15: Drivers and Limiters, Crown and Bridge Market, Asia-Pacific, 2010
Figure 4-16: Drivers and Limiters, Denture Market, Asia-Pacific, 2010
Figure 4-17: Drivers and Limiters, CAD/CAM System Market, Asia-Pacific, 2010

Figure 4-18: Leading Competitors, Total CAD/CAM Prosthetics Market, Asia-Pacific, 2010
Figure 4-19: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific, 2010
Figure 4-20: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-21: Units Sold by Material Type, CAD/CAM Block Market, Asia-Pacific, 2007 – 2017

COUNTRY PROFILES
Figure 5-1: Price Index, Asia-Pacific, 2010
Figure 5-2: Country Indicators, Asia-Pacific, 2010
Figure 5-3: Population per Dentist, Asia-Pacfic, 2010

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 93
Figure 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M)
Figure 6-2: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (JP¥M)
Figure 6-3: Crown and Bridge Market, Japan, 2007 – 2017 (US$)
Figure 6-4: Crown and Bridge Market, Japan, 2007 – 2017 (JP¥)
Figure 6-5: Crown and Bridge Units Sold by Material Type, Japan, 2007 – 2017
Figure 6-6: PFM Device Market, Japan, 2007 – 2017 (US$)
Figure 6-7: PFM Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-8: Full-Cast Device Market, Japan, 2007 – 2017 (US$)
Figure 6-9: Full-Cast Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-10: All-Ceramic Device Market, Japan, 2007 – 2017 (US$)
Figure 6-11: All-Ceramic Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-12: Hard-Resin Device Market, Japan, 2007 – 2017 (US$)
Figure 6-13: Hard-Resin Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-14: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-15: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-16: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-17: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-18: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-19: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-20: Denture Market by Type, Japan, 2007 – 2017
Figure 6-21: Denture Market, Japan, 2007 – 2017 (US$)
Figure 6-22: Denture Market, Japan, 2007 – 2017 (JP¥)
Figure 6-23: Denture Units by Type, Japan, 2007 – 2017
Figure 6-24: CAD/CAM System Market, Japan, 2007 – 2017
Figure 6-25: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-26: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-27: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-28: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-29: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-30: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-31: Drivers and Limiters, Total Dental Prosthetics Market, Japan, 2010
Figure 6-32: Drivers and Limiters, Crown and Bridge Market, Japan, 2010
Figure 6-33: Drivers and Limiters, Denture Market, Japan, 2010
Figure 6-34: Drivers and Limiters, CAD/CAM System Market, Japan, 2010
Figure 6-35: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
Figure 6-36: Leading Competitors, CAD/CAM System Market, Japan, 2010
Figure 6-37: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan, 2010
Figure 6-38: Leading Competitors, Standalone Scanner CAD/CAM System Market, Japan,

2010
Figure 6-39: CAD/CAM Block Market, Japan, 2007 – 2017 (US$)
Figure 6-40: CAD/CAM Block Market, Japan, 2007 – 2017 (JP¥)
Figure 6-41: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007 – 2017

Figure 7-1: Dental Prosthetics Market, South Korea, 2007 – 2017 (US$M)
Figure 7-2: Dental Prosthetics Market, South Korea, 2007 – 2017 (KRWM)
Figure 7-3: Crown and Bridge Market, South Korea, 2007 – 2017 (US$)
Figure 7-4: Crown and Bridge market, South Korea, 2007 – 2017 (KRW )
Figure 7-5: Crown and Bridge Units Sold by Material Type, South Korea, 2007 – 2017
Figure 7-6: PFM Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-7: PFM Device Market, South Korea, 2007 – 2017 (KRW )
Figure 7-8: Full-Cast Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-9: Full-Cast Device Market, South Korea, 2007 – 2017 (KRW )
Figure 7-10: All-Ceramic Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-11: All-Ceramic Device Market, South Korea, 2007 – 2017 (KRW )
Figure 7-12: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-13: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KRW )
Figure 7-14: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-15: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KRW )
Figure 7-16: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-17: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KRW )
Figure 7-18: Denture Market, South Korea, 2007 – 2017 (US$)
Figure 7-19: Denture Market, South Korea, 2007 – 2017 (KRW )
Figure 7-20: Denture Units by Type, South Korea, 2007 – 2017
Figure 7-21: CAD/CAM System Market, South Korea, 2007 – 2017
Figure 7-22: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-23: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (KRW )
Figure 7-24: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017
(US$)
Figure 7-25: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017
(KRW )
Figure 7-26: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-27: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (KRW )
Figure 7-28: Drivers and Limiters, Dental Prosthetics Market, South Korea, 2010
Figure 7-29: Drivers and Limiters, Crown and Bridge Market, South Korea, 2010
Figure 7-30: Drivers and Limiters, Denture Market, South Korea, 2010
Figure 7-31: Drivers and Limiters, CAD/CAM System Market, South Korea, 2010
Figure 7-32: Leading Competitors, CAD/CAM Prosthetics Market, South Korea, 2010
Figure 7-33: Leading Competitors, CAD/CAM System Market, South Korea, 2010
Figure 7-34: Leading Competitors, Full In-Lab CAD/CAM System Market, South Korea, 2010
Figure 7-35: Leading Competitors, Standalone Scanner CAD/CAM System Market, South
Korea, 2010
Figure 7-36: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$)
Figure 7-37: CAD/CAM Block Market, South Korea, 2007 – 2017 (KRW )
Figure 7-38: Units Sold by Material Type, CAD/CAM Block Market, South Korea, 2007 –
2017

Figure 8-1: Total Dental Prosthetics Market, Australia, 2007 – 2017 (US$M)
Figure 8-2: Total Dental Prosthetics Market, Australia, 2007 – 2017 (AU$M)
Figure 8-3: Crown and Bridge Market, Australia, 2007 – 2017 (US$)
Figure 8-4: Crown and Bridge Market, Australia, 2007 – 2017 (AU$)
Figure 8-5: Crown and Bridge Units Sold by Material Type, Australia, 2007 – 2017
Figure 8-6: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017 (US$)
Figure 8-7: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-8: Full-Cast Device Market, Australia, 2007 – 2017 (US$)
Figure 8-9: Full-Cast Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-10: All-Ceramic Device Market, Australia, 2007 – 2017 (US$)
Figure 8-11: All-Ceramic Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-12: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-13: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-14: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-15: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-18: Denture Market, Australia, 2007 – 2017 (US$)
Figure 8-19: Denture Market, Australia, 2007 – 2017 (AU$)
Figure 8-20: Units Sold by Type, Denture Market, Australia, 2007 – 2017
Figure 8-21: CAD/CAM System Market, Australia, 2007 – 2017
Figure 8-22: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-23: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-24: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-25: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-26: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (US$) 280
Figure 8-27: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-28: Drivers and Limiters, Dental Prosthetics Market, Australia, 2010
Figure 8-29: Drivers and Limiters, Crown and Bridge Market, Australia, 2010
Figure 8-30: Drivers and Limiters, Denture Market, Australia, 2010
Figure 8-31: Drivers and Limiters, CAD/CAM System Market, Australia, 2010
Figure 8-32: Leading Competitiors, CAD/CAM Prosthetics Market, Australia, 2010
Figure 8-33: Leading Competitors, CAD/CAM System Market, Australia, 2010
Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market, Australia, 2010
Figure 8-35: Leading Competitors, Standalone Scanner System Market, Australia, 2010
Figure 8-36: Leading Competitors, Chairside CAD/CAM System Market, Australia, 2010
Figure 8-37: CAD/CAM Block Market, Australia, 2007 – 2017 (US$)
Figure 8-38: CAD/CAM Block Market, Australia, 2007 – 2017 (AU$)
Figure 8-39: Units Sold by Material Type, CAD/CAM Block Market, Australia, 2007 – 2017

ABBREVIATIONS
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017
(US$M) 1
Chart 1-2: Percentage of Prosthetics Sold by CAD/CAM Technology versus Conventional
Methods, Asia-Pacific, 2007 – 2017
Chart 1-3: CAD/CAM Block Unit Share by Material Type, Asia-Pacific, 2010

Chart 1-4: Dental Prosthetics Market by Country, Asia-Pacific, 2010
Chart 1-5: Growth Rates by Segment, Crown and Bridge Market, Asia-Pacific, 2007 – 2017
Chart 1-6: Denture Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-7: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-8: Leading Competitors, CAD/CAM System Market, Asia-Pacific, 2010


Chart 4-1: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-2: Total CAD/CAM System Market, Asia-Pacific, 2010 – 2017 (US$M)
Chart 4-3: Crown and Bridge Units by Material Type, Asia-Pacific, 2007 – 2017
Chart 4-4: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-5: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-6: Standalone Scanner CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-7: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-8: Leading Competitors, Total CAD/CAM Prosthetics Market, Asia-Pacific, 2010
Chart 4-9: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific, 2010
Chart 4-10: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-11: Units Sold by Material Type, CAD/CAM Block Market, Asia-Pacific, 2007 – 2017

COUNTRY PROFILES
Chart 5-1: Country Statistics, Japan, 2010
Chart 5-2: Country Statistics, South Korea, 2010
Chart 5-3: Country Statistics, Australia, 2010

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET

Chart 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M)
Chart 6-2: Crown and Bridge Market, Japan, 2007 – 2017 (US$M)
Chart 6-3: Crown and Bridge Units Sold by Material Type, Japan, 2010
Chart 6-4: Crown and Bridge Units Sold by Material Type, Japan, 2017
Chart 6-5: Crown and Bridge Unit Share by Material Type, Japan, 2007 – 2017
Chart 6-6: Denture Market, Japan, 2007 – 2017 (US$M)
Chart 6-7: CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-8: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-9: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-10: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-11: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
Chart 6-12: Leading Competitors, CAD/CAM System Market, Japan, 2010
Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan, 2010
Chart 6-14: Leading Competitors, Standalone Scanner CAD/CAM System Market, Japan,
2010
Chart 6-15: CAD/CAM Block Market, Japan, 2007 – 2017 (US$M)
Chart 6-16: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007 – 2017


Chart 7-1: Dental Prosthetics Market, South Korea, 2007 – 2017 (US$M)
Chart 7-2: Crown and Bridge Market, South Korea, 2007 – 2017 (US$M)
Chart 7-3: Crown and Bridge Market by Material Type, South Korea, 2010
Chart 7-4: Crown and Bridge Market by Material Type, South Korea, 2017
Chart 7-5: Crown and Bridge Unit Share by Material Type, South Korea, 2007 – 2017
Chart 7-6: Denture Market, South Korea, 2007 – 2017 (US$M)
Chart 7-7: CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-8: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (US$M) 201
Chart 7-9: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017
(US$M)
Chart 7-10: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-11: Leading Competitors, CAD/CAM Prosthetics Market, South Korea, 2010
Chart 7-12: Leading Competitors, CAD/CAM System Market, South Korea, 2010
Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Market, South Korea, 2010
Chart 7-14: Leading Competitors, Standalone Scanner CAD/CAM System Market, South
Korea, 2010
Chart 7-15: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$M)
Chart 7-16: Units Sold by Material Type, CAD/CAM Block Market, South Korea, 2007 – 2017

Chart 8-1: Dental Prosthetics Market, Australia, 2007 – 2017 (US$M)
Chart 8-2: Crown and Bridge Market, Australia, 2007 – 2017 (US$M)
Chart 8-3: Crown and Bridge Units Sold by Material Type, Australia, 2010
Chart 8-4: Crowns and Bridge Units Sold by Material Type, Australia, 2017
Chart 8-5: Crown and Bridge Unit Share by Material Type, Australia, 2007 – 2017
Chart 8-6: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$M)
Chart 8-7: Denture Market Australia, 2007 – 2017 (US$M)
Chart 8-8: CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-9: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-10: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-11: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-12: Leading Competitors, CAD/CAM Prosthetics, Australia, 2010
Chart 8-13: Leading Competitors, CAD/CAM System Market, Australia, 2010
Chart 8-14: Leading Competitors, Full In-Lab CAD/CAM System Market, Australia, 2010
Chart 8-15: Leading Competitors, Standalone Scanner System Market, Australia, 2010
Chart 8-16: Leading Competitors, Chairside CAD/CAM System Market, Australia, 2010
Chart 8-17: CAD/CAM Block Market, Australia, 2007 – 2017 (US$M)
Chart 8-18: Units by Material Type, CAD/CAM Block Market, Australia, 2007 – 2017

Latest Market Research Reports
Japanese Market for Dental Prosthetics and CAD/CAM Devices 2011
South Korean Market for Dental Prosthetics and CAD/CAM Devices 2011
Australian Market for Dental Prosthetics and CAD/CAM Devices 2011
U.S. Market for Infusion Therapy Devices 2011 (Infusion Pumps, Needleless Connectors, IV
Sets)
U.S. Market for Small Bone & Joint Orthopedic Devices 2011
U.S. Market for Anesthesia, Respiratory and Sleep Management Devices 2011
U.S. Market for Vascular Access Devices and Accessories 2011

About Us:
ReportsnReports is an online library of over 75,000 market research reports and in-depth
market research studies & analysis of over 5000 micro markets. We provide 24/7 online and
offline support to our customers. Get in touch with us for your needs of market research
reports.
Follow us on Twitter: http://twitter.com/marketsreports
Our Facebook Page: http://www.facebook.com/pages/ReportsnReports/191441427571689

Contact:
Mr. Priyank
7557 Rambler road,
Suite 727, Dallas, TX 75231
Tel: +1-888-989-8004 EXT 106
E-mail: sales@reportsandreports.com
http://www.reportsnreports.com
Visit Our Market Research Blog

ReportsnReports – Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

Recomendados

Recomendados

Mais conteúdo relacionado

Último

Último (20)

Destaque

Destaque (20)

ReportsnReports – Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011