![Cisco ADU and ACAU Overview ,[object Object],[object Object],[object Object],[object Object],AIR-CB21AG-X-K9 AIR-PI21AG-X-K9](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recomendados
Mais conteúdo relacionado
Mais procurados
Mais procurados (20)
Semelhante a Iuwne10 S03 L02
Semelhante a Iuwne10 S03 L02 (20)
Mais de Ravi Ranjan
Mais de Ravi Ranjan (20)
Último
Último (20)
Iuwne10 S03 L02
- 1. Wireless Clients Describing Cisco Aironet WLAN Client Adaptors
- 3. Installing the Cisco ADU Plug and play install, three install options
- 10. Cisco ADU: Creating Profiles
- 11. Cisco ADU: Profile Security
- 13. Cisco ADU: Other Tools — Diagnostic Diagnostic tab gives more detailed information on your adapter and your connection. Also used for monitoring and troubleshooting.
- 14. Cisco ADU: Other Tools — Diagnostic (Cont.) In the client managed test, the network connectivity is tested from the WLAN adapter, starting from the driver installation up to network and authentication test, and through card insertion, enable, radio and association tests. There is also a network managed test, where the test is conducted from the WLC, the client being passive. This tests how the networks sees you, rather than how you see it.
- 18. Cisco Aironet Site Survey Utility: Thresholds From Threshold>Configure Thresholds, determine how you want to log events detected by the utility. They can be changes in the association, connection (or loss) to an URL, RSSI, noise, SNR, or speed thresholds. This allows you to determine physical limits of your cells. To avoid too many entries in the logs, you can configure the minimum duration of an event worth noticing.
- 19. Cisco Aironet Site Survey Utility: AP Scan List The AP scan list reports all the APs detected by your adapter, not for you to pick one to associate to, but to analyze the APs around the adapters and determine their physical characteristics. You can interrupt the scanning process to stay on one channel, log the list. Accumulate writes all the detected APs over time, without deleting those not in range anymore.
- 20. Cisco Aironet Site Survey Utility: AP Scan List (Cont.) Click AP Scanning>Configure to determine how often the AP list would be logged automatically, and/or in which case a log entry should be written.
- 22. Cisco Aironet Configuration Administration Utility: Profile Management Creating a profile from the ACAU is very similar to the same process on the ADU, general, security, advanced tabs are the same.