2. may 14 2010
Introduction
Spreading is the process of superimposing
the plies of fabric one over other according to
the predetermined plan.
Spreading speed may affect productivity,
quality and cost of operation
About 40-50% of companies turnover depends
on effective fabric utilization
3. may 14 2010
Requirements of Spreading
• Shade sorting of cloth rolls
• Correct ply direction and adequate lay stability
• Alignment of Plies
• Grain Alignment (bowing)
• Correct Ply Tension
• Elimination of Fabric Faults
• Elimination of Static Electricity
• Avoidance of Fusion of Plies during Cutting
4. may 14 2010
Spreading Modes
Face To Face & Nap either way Face One Way & Nap One Way
Face To Face & nap one way Face to Face & Nap Either Way
5. may 14 2010
Types of Spreader
It can be categorized into two categories
• Stationary spreaders: portable and fixed
• Traveling spreaders: semi automatic and
automatic
• Stationary spreaders remain in one position on
the table during the spreading process
• Traveling spreaders traverse the length of the
spread during the spreading process
7. may 14 2010
Supply Roll Positive Feed
Roller
Frame
including Fabric
spaced Clutter Box and
uprights Clamp Assembly
Movement of the
clutter box
Upstanding
Basic bar and Roller
Frame or
Carriage Catcher
Assembly
Table
Catcher Bar
SPREADING MACHINE
8. may 14 2010
Spreading Equipments
• Spreading table
• Spreading machines
• Fabric control devices
• Fabric cutting devices
9. may 14 2010
Spreading Table
1. Spreading table
surface must be
level, smooth, even
2. Air floatation
system as a
conveyor
3. Pin /spike table for
stripe matching
4. splicing marks
10. may 14 2010
Spreading Table Width
• Can support 50-1000kg
Max width of Max width of
material (cm) table (cm)
90 110
100 120
120 140
140 160
160 180
180 200
200 220
210 230
220 240
11. may 14 2010
Fabric Control Devices
• These are those mechanisms that control fabric
as it is carried up and down the table and
unrolled by the spreading machine
• These include- Edge sensor
-Tensioning control mechanisms
-Positioning devices
-End treatment devices Width indicator
End catchers Turn table
12. may 14 2010
Fabric Cutting Devices
• Knife box contains a
cutting unit
• Usually a small rotary
knife
• It cuts across the
fabric width when
engaged
15. may 14 2010
Manual Spreading
One operator at each
side of table.
Fabric package
supported on frame.
Operator aligns the
plies manually
Ply cut with hand
shears, circular knife
etc.
Ideal for small-scale
production
16. may 14 2010
Fabrics Preferred for Manual Spreading
• Knitted fabric
• Crepe fabric
• Stretchable fabric (spandex blend)
• Checks
• Stripes
• Regularly repeating pattern etc.
17. may 14 2010
Manual Spreading Frames
Fixed type Eastman Pacemaker
• Light weight machine with
A very basic fixed size manual a fast pace
spreading machine
18. may 14 2010
Manual Spreading Frames
Expandable Basic Turn Table Spreading
Machine
• Spreading machine that is width size
adjustable.
• Has manual edge control.
20. may 14 2010
Basic automatic spreading machine
A motor drives the
carriage
A platform on which the
operator rides
A ply cutting device with
automatic catcher holding
ends of ply in place
A ply counter
Automatic sensing of
flaws
21. may 14 2010
Automated Spreading Machines
with special features
• Single ply fabric feeder
• Tubular systems
• Turntable spreader
• Spreader synchronic
23. may 14 2010
Factors affecting spreading cost
• Labour cost
• Fabric cost
• Equipment cost
24. may 14 2010
Factors affecting labour cost of
spreading
• Machine set-up time
• Delay during reloading
• Fabric type
• Roll size
• Machine Automation