When installing or building a pond there are 3 main methods to construction. Firstly you can buy a pre-fabricated pond shell made from either fibreglass or plastic. These are a very easy and quick way to get started with a pond.
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Protecting your pond liner
1. Protecting your pond liner
When installing or building a pond there are 3 main methods to construction. Firstly you
can buy a pre-fabricated pond shell made from either fibreglass or plastic. These are a
very easy and quick way to get started with a pond.
However you will be limited to size and shape of what is available. Some people chose to
concrete form their ponds but this can be an expensive process. Lastly many people
choose to dig our their own pond and line it with a pond liner.
When preparing a site for a pond and before fitting a pond liner, you will need to make sure
the ground is smooth as possible and there are no rocks, protruding roots or any other
sharp objects. Some people lay down about 50 mm of sand to make a firm base or
alternatively you can use a geo textile underlay.
A geo textile underlay adds a protective barrier between a liner and the surface it is being
installed onto. Used not only with pond liners, it is regularly used with tank liners and
dam liners, helping protect the liner against sharp objects like rocks as well as from
intrusion from tree roots.
Geo textile underlay is usually recommended as it is a better alternative to sand. It can
hinder root growth into the pond liner as well as being more flexible with ground
movement.
A good geo textile underlay needs to have a couple of key properties:
1. It should be permeable, which means it lets water pass through it.
2. It needs to be designed to be laid against soil and dirty conditions, and needs to be
rot resistant.
3. Finally in needs the ability to separate, filter, reinforce, protect or drain water that
might be trapped under the pond lining.
2. Geo textile underlay material is also a great DIY solution, as its much easier and quicker to
lay than sand. You can also install the underlay in sections, just overlapping the joins,
which means you waste less by being able to utilise smaller pieces.
Typically made from mechanically bonded polypropylene needle punched material and
usually comes in black, but can be bought in white or grey colours. This long lasting
material is a recommended addition with making any small or large pond with a pond liner.
For More Information Visit :- Pond Lining