In order to maximize the lifetime and efficacy of a transformer, it is important to be aware of possible
faults that may occur and to know how to catch them early. Regular monitoring and maintenance can
make it possible to detect new flaws before much damage has been done. To read more articles on this topic visit http://pacificcresttrans.com/home.html
![-276225-390525Transformer Fault and Detection26955751934210 In order to maximize the lifetime and efficacy of a transformer, it is important to be aware of possible faults that may occur and to know how to catch them early. Regular monitoring and maintenance can make it possible to detect new flaws before much damage has been done. The four main types of transformer faults are: Arcing, or high current break down Low energy sparking, or partial discharges Localized overheating, or hot spots General overheating due to inadequate cooling or sustained overloading ,[object Object],Large quantities of hydrogen and acetylene (C2H2) can indicate heavy current arcing. Oxides of carbon may also be found if the arcing involves paper insulation. The presence of hydrogen and lower order hydrocarbons can be a sign of partial discharge Significant amounts of methane and ethane may mean localized heating or hot spots. CO and CO2 may evolve if the paper insulation overheats; which can be a result of prolonged overloading or impaired heat transfer. Techniques to Detect Faults Techniques to detect transformer faults include the Buchholz Relay safety device, dissolved gas analysis (DGA) tests and a range of tests for detecting the presence of contaminants in the oil, as well as for measuring indicators of oil quality such as electric strength and resistivity. Buchholz Relay A Buchholz Relay is also called a gas detection relay. It is a safety device generally mounted at the middle of the pipe connecting the transformer tank to the conservator. A Buchholz Relay may be used to detect both minor and major faults in the transformer. This device functions by detecting the volume of gas produced in the transformer tank. Minor faults produce gas that accumulates over time within the relay chamber. Once the volume of gas produced exceeds a certain level, the float will lower and close the contact, setting off an alarm. Major faults can cause the sudden production of a large quantity of gas. In this case, the abrupt rise in pressure within the tank will cause oil to flow into the conservator. Once this is detected the float will lower to close the contact, which causes the circuit breaker to trip or sets off the alarm. Dissolved gas analysis (DGA) Dissolved gas analysis, or DGA, is a test used as a diagnostic and maintenance tool for machinery. Under normal conditions, the dielectric fluid present in a transformer will not decompose at a rapid rate. However, thermal and electrical faults can accelerate the decomposition of dielectric fluid and solid insulation. Gases produced by this process are all of low molecular weight, and include hydrogen, methane, ethane, acetylene, carbon monoxide and carbon dioxide. These gases will dissolve in the dielectric fluid. Analyzing the specific proportions of each gas will help in identifying faults. Faults detected in such a way may include processes such as corona, sparking, overheating and arcing. Abnormal functioning within a transformer can be caught early by studying the gases that accumulate within it. If the right countermeasures are taken early on, damage to equipment can be minimized. Other oil tests Other oil tests used to detect faults include acidity tests, electric strength tests, fiber estimation tests, color tests, water content tests, Polychlorinated Biphenyl Analysis (PCB) tests, furfuraldehyde analysis tests, metal in oil analysis tests and resistivity tests. Acidity test: The acidity of transformer fluid should be monitored regularly. High acidities can hasten the degradation of paper insulation and cause steel tanks to corrode. Electric Strength: The electric strength of an insulating fluid is its capacity to withstand electrical stress without failing. The lower the dielectric strength of a fluid, the less it will be able to insulate. Transformer failure can result if the dielectric strength drops too low. Fiber estimation: If fibers or other contaminants are present in a transformer's oil, they may reduce the oil's electric strength. Wet fibers in particular can be drawn into an electrical field, resulting in arcing. Passing polarized light through an oil sample can make fibers and other sediments visible, making it possible to estimate the fiber content of the sample. Sampling should be done carefully, since both fibers and moisture may be picked up during the process of sampling itself. Color: Obvious changes in oil color (for instance, light oil abruptly growing dark) may indicate deeper changes within the oil itself that need to be examined further. PCB Test: A Polychlorinated Biphenyl Analysis (PCB) test calculates the concentration or presence of polychlorinated biphenyl within the oil. Capillary column chromatography can be used for this process. While the presence of PCBs is not an indication of oil quality, PCBS are a banned substance, no longer allowed in new liquid filled transformers. Metal in oil analysis: The concentrations of various metals in a transformer's oil can be calculated by using methods such as atomic absorption spectroscopy (AA) and inductive coupled plasma spectrometry (ICP). Furfuraldehyde Analysis: The concentration of furfuraldehyde in an oil sample can be used as a measure of paper degradation. Furfuraldehyde is one of the byproducts of paper degrading and growing weaker, a process which sets a natural limit on a transformer's life. Monitoring its concentration levels can help determine the remaining service life of a transformer. Moisture: Excess moisture in the oil can cause the oil's electric strength to plummet, leading to transformer failure. It is therefore very important to monitor moisture levels in the transformer. Resistivity Test: High resistivity indicates low levels of free ions and ion-forming particles, as well as low levels of conductive contaminants. Resistivity tests are generally carried out at ambient temperature. It can also be useful, however, to carry out tests at much higher temperatures, the results of which can be compared to results at ambient temperature.](https://image.slidesharecdn.com/transformersfaultsanddetection-091125225544-phpapp02/85/transformers-faults-and-detection-1-320.jpg)
