1. Dear Summer,
Attached is the new P/I for the 2pcs of AC-6B3B10 which you ordered at the phone. We also enclosed
the controller(monitor) language in English for your translation. Due to there are character number
limit in the language setting, we have abbreviated some words. In order to make you understand what
those words mean clearly, we have also enclosed the controller menu for your reference.
----------------------------------------------------------------------------------------------------------------------------
----------
触摸屏界面英译
8.4” Touch Screen Interface Description
注意:新翻译的语言字符数(含空格)必须小于或等于英文字符数(含空格)
Attention: The character number(including space) of new language should be ≤ the
character number(including space) in English version.
1jpg: (Pls refer to the Page no.1-3 Illustration 5-1-1)
组合称=multihead weigher
1 运行=run
2 手动操作=manual ope
3 程序设置=program set
4 统计=statistic
5 初始标定=calibration
6 系统设置=system set
置零=zero
停止=stop
清空=clear
通电开机,请按“置零”键清除秤斗物料后运行;清空物料请按“清空”键
Please press “zero” key to run after the machine turn on. Clean up machine by pressing “clear”.
2jpg: (Pls refer to the Page no.3-6 Illustration 5-2-1)
2. 运行:=run
程序号=program NO.
产品图片=product ph
品名称=product name
目标值=target wt
上限重量=up limit
下限重量=low limit
平均斗数=ave bucket
实际速度=actual sp
预置速度=target sp
主振机=mf amplitude
线振机=lf amplitude
运行=run
合格=pass
线振=LF
单斗重量= weight
单个重量=weight
数量=number
返回= return
3jpg (Pls refer to the Page no.6-9 Illustration 5-3-1)
手动调试=manual operation
单次运行= cycle run
连续运行=conti run
3. 线形振机=linear fd
主振机=main fd
进料斗=feed
称重斗=weigh
集料斗=collect
称重斗置零=wb zero
主振零复位=mf zero rst
禁止头=inhibit head
提示=range
停止=stop
返回=return
4.0jpg (Pls refer to the Page no.10-11 Illustration 6-1-1)
程序设置=program set
目标重量=target we
上限重量=up limit
下限重量=low limit
产品图片=product ph
产品名称=product name
选择程序号=prog selectio
程序复制=program copy
参数设置=parameter set
提示=range
返回=return
4. 输入键盘=input keyboard
4.1jpg (Pls refer to the Page no.11-14 Illustration 6-1-2)
参数设置=parameter set
程序号= program NO.
产品图片=product ph
产品名称=product name
目标重量=target wt
上限重量=up limit
下限重量=low limit
偏差量=bias wt
包装速度=speed
主振机振幅=mf amp
线振机振幅=lf amp
主振机加料=mf on time
线振机加料=lf on time
AFC=AFC
AFCT 目标斗数=AFCT target NO.
AFCT 重置间隔=AFCT reset int
AFCT 限制斗数=AFCT limit NO.
AFCI 单斗重量=AFCI single wt
AFCI 重置间隔=AFCI reset int
AFCI 限制重量=AFCI limit wt
提示=range
5. 返回=return
输入键盘=input keyboard
下一页=page dn
4.2jpg (Pls refer to the Page no.15-18 Illustration 6-1-3)
参数设置=parameter set
无料检出=no load
无选择检出=no select
自动置零时间=zero interval
料位加料时间=feed time
多次放料次数=feed times
进料斗延时=fb delay
称重斗延时=wb delay
组合卸料间隔=sta interval
集料斗延时=cb delay
集料斗后延时=after cb time
卸料信号延时=dis delay time
卸料信号宽度=dis on time
主振机上限=max mf
主振机下限=min mf
进料马达模式=fb mot patt
称重马达模式= wb mot patt
集料马达模式=cb mot patt
组合加料=enforce feed
6. 保留=single wt
保留= reservation
提示=range
上一页= page up
返回=return
输入键盘=input keyboard
5jpg (Pls refer to the Page no.9-10 Illustration 5-4-1)
统计=statistic
程序号=program NO.
产品名称=product name
目标值=target weigh
上限重量=up limit
下限重量=low limit
开始时间=start time
终止时间=stop time
合格包数=pass package
不合格包数=fail package
合格率=pass rate
平均误差=ave error
总重量=total weight
总个数=total number
下一条记录=next record
上一条记录=up record
7. 不合格记录=fail record
总记录数=total record
该日记录数=day records
输入查看日期=input check date
输入查看记录号=input record number
清除所有记录=clear all record
输入键盘=input keyboard
提示=range
返回=return
5.1jpg (Pls refer to the Page no.9-10 Illustration 5-4-2)
不合格记录=fail record
程序号=program NO.
产品名称=product name
目标值=target weigh
上限重量=up limit
下限重量=low limit
开始时间=start time
终止时间=stop time
合格包数=pass package
不合格包数=fail package
合格率=pass rate
平均误差=ave error
总重量=total weight
8. 总个数=total number
下一页= page dn
上一页= page up
编号=NO.
重量=weight
日期=date
时间=time
返回=return
6jpg (Pls refer to the Page no.18 Illustration6-4-1)
初始标定:calibration
初始标定=initial
重新标定=auto
置零=zero
满度值=full
当前秤斗号=NO.
*Initial: clear scale, input bucket number, Press the “ent” key. When cursor moves from “zero” to “full,
put 1kg on weigh bucket, press “ent” key to end calibration.
*Auto: Clear scale, input bucket number, press the “ent” key. when cursor moves from “zero” to “full”,
press “ent” key to end calibration.
*Clear scale, input bucket number, press the “ent” key .press “ent” key to initial zero.
输入键盘=input keyboard
提示=range
返回=return
7jpg (Pls refer to the Page no.20-24 Illustration6-5-1)
9. 系统设置=system set
日期设置=date set
时间设置=time set
上限倍数=acc times
优化次数=optimu
强排斗数=enforce
集料斗设置=collect
主振机传感器=mf det way
主振输出方式=mf working
小数点位置=decimal
口令设置 1=password
联机状态=network set
背光灯=lamp
触摸屏校准=touch sc cal
触发方式=trigger way
放料方式=disch way
滤波系数=filter
进料斗马达设置=motor of fb
称重斗马达设置=motor of wb
集料斗马达设置=motor of cb
输入键盘=input keyboard
提示=range
返回=return
10. 8jpg (pls refer to page no. 26 Illustration 6-4-6 & Illustration 6-4-7)
马达模式设置=motor pattern
进料马达=fb motor
称重马达=wb motor
集料马达=cb moto
模式号=pa NO.
模式 0=pa 0
段号=ph NO.
一段速度=phase 1
停顿时间=stop time
电流=current
9jpg (pls refer to page no. 22-23 Illustration 6-4-2 & Illustration 6-4-3)
触摸屏校准第一步=fist step of screen calibration
点击红色图标=touch red point
触摸屏校准第二步= second step of screen calibration
请输入密码=password
密码不正确=password error!
Page 1 of 5