Communications Systems

1. Communications
Systems
The topics within this unit are:
Characteristics of communication systems.
Examples of communication systems.
Transmitting and receiving in communication
systems.
Other information processes in communication
systems.
Issues related to communication systems.
Graham Betts

2. TOPICS MENU
Click on the topic of your choice
Characteristics of Communication
Systems
Examples of Communication Systems
Transmitting and Receiving
Other Information Processes
Issues Related To Communication
Systems
Graham Betts

3. Communications Terms
Communications Glossary
Communications Networking Glossary
Glossary of Networking terms at Clock.org
Graham Betts

4. Characteristics of
Communication Systems
Protocols
Handshaking
Speed of Transmission
Error Checking
Communication Settings
Graham Betts

5. Characteristics of
Communication Systems
More Information
must be a Sender and Receiver
A protocol is a set of rules which governs the transfer of
data between computers. Protocols allow communication
between computers and networks.
Handshaking is used to establish which protocols to use.
Handshaking controls the flow of data between computers
protocols will determine the speed of transmission, error
checking method, size of bytes, and whether synchronous
or asynchronous
Examples of protocols are: token ring, CSMA/CD, X.25,
TCP/IP
Graham Betts

6. 5 Basic Components
Every communication system has 5 basic requirements
•Data Source (where the data originates)
•Transmitter (device used to transmit data)
•Transmission Medium (cables or non cable)
•Receiver (device used to receive data)
•Destination (where the data will be placed)
Graham Betts

7. 5 Basic Components
Graham Betts

8. Transmission Media Speed
•Bandwidth:The amount of data which can be
transmitted on a medium over a fixed amount of time
(second). It is measured on Bits per Second or Baud
•Bits per Second (bps): A measure of
transmission speed. The number of bits (0 0r 1) which
can be transmitted in a second (more)
•Baud Rate: Is a measure of how fast a change of
state occurs (i.e. a change from 0 to 1) (more)
Graham Betts

9. Packets
Transmissions are broken up into
smaller units or data transmissions
called packets
Example
A This file is divided into broken into four packets
data has now been packets.
It does not matter what the transmission is. It could be Word
document, a PowerPoint or an MP3.PACKET this Green box
PACKET PACKET Imagine PACKET
is a file for transfer
Graham Betts

10. Packets and OSI
After the file is divided into packets
extra information is required to make
sure it all goes back together correctly.
The OSI model helps to look after this.
The OSI model also provides much
more information which is included with
each package.
Graham Betts

11. OSI 7 Layer Model
Originally Created by Bob Baker
Modified 2006 More Information on OSI
Graham Betts
•OSI “Open System Interconnection”
•OSI is not a protocol but a list of protocols
divided between 7 layers with each layer having
a different set of functions.
•Each packet is layered/packaged with protocols
from each of the layers as it is processed.
•The process of layering the protocols around
each package is called encapsulation. The final
encapsulated data packet is called a frame.
Graham Betts

12. Originally Created by Bob Baker
Open Systems
Modified 2006
Graham Betts
Interconnection
OSI Reference model Sende Receive
 Layer 7 application r
Each Packet
r
Each file
The protocols
 Layer 6 presentation is divided
will
The encapsulated
Will be added
 Layer 5 session then be
into
Packet is called
systematically The received
File
File
Encapsulated
packets
 Layer 4 transport aLayer
frame frame is then
with File
By layer unpacked
 Layer 3 network PROTOCOLS
in the
 Layer 2 data link opposite order
 Layer 1 physical
Transmission Medium
Graham Betts

13. Originally Created by Bob Baker
Services Performed at
Modified 2006
Graham Betts
Each Layer
 Layer 7 application  Identification, authentication
 Layer 6 presentation  Format conversion
 Layer 5 session  Set-up coordinate conversation
 Layer 4 transport  Ensures error-free transfer
 Layer 3 network  Routing of data through network
 Layer 2 data link  Error control and synchronisation
 Layer 1 physical  Placing signals on the carrier
Graham Betts

14. Originally Created by Bob Baker
Modified 2006
Graham Betts
Examples of protocols
More on Protocols
 Layer 7 application  E-mail, Web browser, Directory
 Layer 6 presentation  POP, SMTP, FTP, HTTP, DNS
 Layer 5 session  Sockets
 Layer 4 transport  TCP
 Layer 3 network  IP
 Layer 2 data link  PPP, Ethernet, Token ring
 Layer 1 physical  100baseT
Graham Betts

15. Originally Created by Bob Baker
Modified 2006
Graham Betts
Encapsulation
Device 1 Device 2
Application data Application
Presentation H6 data T6 Presentation
Session H5 data T5 Session
Transport H4 data T4 (Packet) Transport
Network H3 data T3 (packet Network
Data Link ) Data Link
H2 data T2
Physical H1 data T1 Physical
carrier FRAME FRAME FRAME FRAME
Destination Source
A typical frame Preamble
Address Address
Data Padding CRC
Graham Betts

16. Error Checking Methods
More on internet
• Parity bit check
• Check sum
* data transmitted in blocks, each block added
to give a total – checksum
* used in X Modem protocol
• Cycle redundancy check
Graham Betts

17. HSC Topic 3.3
Examples of
Communication Systems
Graham Betts

18. Examples of Communication Systems
- E-mail
- Voice Mail - Fax
- Smart Phone - Instant Messaging
- Telecommuting - Video-conferencing
- Groupware - Telephony
- E-Commerce - The Internet
- Bulletin board system - The Web
- Global positioning system
Graham Betts

19. HSC Topic 3.4
Transmitting and
Receiving in
Communication Systems
Communication concepts
(transmission of data, protocols and handshaking, networks, LANs and
WANs,Topologies, Network Access Methods)
Network Hardware
(NICs, Servers, Routers and Switches, Bridges and gateways, Hubs,
Transmission media
Network Software
NOSs, Network Operating System Tasks, Logon and Logoff Procedures, Intranets
and Extranets
Graham Betts

20. Communication
Concepts
Any transmission May be:
•analog or digital
•Serial or parallel
Graham Betts

21. Serial Transmission
Data is transmitted, on a single channel, one bit at a
time one after another
- Much faster than parallel because of way bits
processed (e.g. USB and SATA drives)
1 0 0 1 1 0 0 1
Sender transmitted Receiver received
Graham Betts

22. Parallel Transmission
-each bit has it’s own piece of wire along which it travels
- often used to send data to a printer
Sender transmitted
1
Receiver received
0
0
1
1
0
0
1
All bits are sent simultaneously
Graham Betts

23. Why Not use Parallel
Instead of serial?
Due to inconsistencies on channels data
arrives at different times
Because of the way it is transmitted packet
switching cannot be used
The above two points makes parallel slower
than serial and requires higher bandwidth.
Parallel transmissions are rarely used
anymore
Graham Betts

24. Synchronous Vs
AsynchronousTransmissions
Synchronous Transmission
all data sent at once and no packet switching
Asynchronous Transmission
•Uses stop/ start bits
•most common type of serial data transfer
•Allows packet switching
•Allows sharing of bandwidth (i.e. talk on phone
while another person is using internet)
Graham Betts

25. Transmission Direction
- simplex: One direction only
Graham Betts

26. Half Duplex
Transmission
half duplex: Both
directions but
only one
direction at a
time
Graham Betts

27. Full Duplex
Transmission
full duplex:
send and
receive both
directions at
once
Graham Betts

28. 3 Common Protocols
•Ethernet (Ethernet Network)
-Carrier Sense Multiple Access/Collision Detection
(CSMA/CD)
-TCP/IP
Graham Betts

29. Ethernet
Developed at Xerox in 1976.
First protocol approved as an industry
standard protocol 1983
LAN protocol used on bus and star
Most popular LAN protocol
Inexpensive
Graham Betts

30. Carrier Sense Multiple
Access/Collision
Detection (CSMA/CD)
- Used on bus networks to avoid data
collisions.
Graham Betts

31. TCP/IP
• Developed in 1973 for use on the
ARPANET which was a defense force
research network.
-Adopted in 1983 as the Internet standard.
all hosts on the Internet are required to
use TCP/IP.
- Allows transfer of data using packet
switching
Graham Betts

32. LANs Vs WANs
LAN is “local Area network” which is a
network confined to a small geographic
area which is a building or a group of
buildings.
WAN is “wide area network” which is a
network spread over a large geographic
area. The largest WAN is the internet.
Graham Betts

33. Examples of LANS
3 different types of LANS are:
 Ring
 Bus
 Star
Graham Betts

34. Uses an empty data
Ring packet called a token
and a special protocol
called “token ring”.
Packets travel around
the ring in a clockwise
direction. Clients
require an empty token
to transmit data.
Advantages
- no collisions
because all data travels
in same direction.
Disadvantages
- fails if an individual
node in the network
fails
Graham Betts

35. BUS TOPOLOGY
A bus is a form of Ethernet. Nodes linked by a cable known as the
bus. Bus transmits in both directions and uses CSMA/CD protocol
Advantages Disadvantages
- Easy to set up and maintain -Higher rate of data collision than
failure of one node does not affect with a bus network
network -fails if there is any damage to the
bus
Graham Betts

36. Star
All data is sent from
one client to another
through the server.
Advantages
- If one client fails no
other clients are
affected.
Disadvantages
- If central file server
fails the network fails.
Graham Betts

37. Network Hardware
Graham Betts

38. What is a Network?
A network is a number of computers and
peripheral devices connected together so as
to be able to communicate (i.e. transfer
data)
Each device in a network is called a
node.
Terminals are data entry points which
can also display.
Graham Betts

39. NETWORKS: categorized
by size
LAN – a network that connects computers in a limited
geographical area.
MAN – a backbone that connects LANs in a metropolitan
area such as a city and handles the bulk of communications
activity across that region.
WAN – covers a large geographical area such as a city or
country. Communication channels include telephone lines,
Microwave, satellites, etc.
Graham Betts

40. NETWORK TOPOLOGIES
(categorizing by shape)
Graham Betts

41. Bridge
Large networks can be separated into two or more smaller
networks using a bridge. This is done to increase speed and
efficiency. This type of network is called a segmented LAN and
has largely been superseded by the use of switches which can
transfer data straight to a computer and thus avoid bottleneck jams
which bridges were designed to fix.
Bridge
Graham Betts

42. Gateway
Often used to connect a LAN with a WAN. Gateways join two or
More different networks together.
Gateway
Graham Betts

43. Internet, Intranet, Extranet
Internet
public/international network which is used to access
information, e-shopping, e-banking, email
Intranet
private network (LAN or WAN) used to share resources in secure
environment
uses web pages (HTML to view) and TCP/IP protocols (to make
connection)
Extranet
intranet that has been extended to include access to or from selected
external organizations such as customers, but not general public.
Note: Connections via leased lines, or network interconnections.
Graham Betts

44. Transmission Media
More on internet
twisted pair – telephone cable
coaxial cable –Thick black cable used for
higher bandwidth communications than
twisted pair (i.e. Optus cable)
fibre optic – data transferred through
pulses of light. Extremely fast.
Non cable methods such as satelite,
microwave, wireless and bluetooth
Graham Betts

45. Network Hardware
More on Internet
SERVERS: Help to manage the network and the resources
of that network. On larger networks servers commonly have
specialised tasks such as: File Servers: stores and manages
files, Print Servers: manages printers and print jobs, Mail
Server: Manages email, Web Server: manages web access.
Routers: connects multiple networks and are protocol
independent. can be used in place of a switch or bridge.
Switches: smart hubs which transmit packets to the
destination port only
Hubs: like double adapters /power boards in the home
except instead of plugging in extension cords we are plugging
in computers to allow them to communicate.
Graham Betts

46. Some Network
Administration Tasks
- adding/removing users
- assigning users to printers
- giving users file access rights
- installation of software and sharing with users
- client installation and protocol assignment
- logon and logoff procedures
- network based applications
Graham Betts

47. Other Information
Processes in
Communication Systems
Collecting: phone as collection device with voice mail,
EFTPOS terminal as a collection device for electronic
banking
processing: sending of attachments with e-mail,
encoding and decoding methods, including: analog data
to analog signal, digital data to analog signal, digital
data to digital signal, analog data to digital signal, client-
server architecture: the client controls the user interface
and the application logic server controls access to the
database
Graham Betts

48. Collecting
Collecting: The following are collection devices: ATMs
for internet banking, EFTPOS for stores, microphone and
video camera for video conferencing. Data can be analog
or digital
Graham Betts

49. Processing
Processing: Is the manipulation or
changing the data into a more useable
format. The processing may include
changing the appearance of the data,
the file type or storage options.
Graham Betts

50. Displaying
Displaying: How the information
is made available for the user to
see
Graham Betts

51. Issues related to
Communication Systems
Messaging Systems (social context, Danger of Misinterpretation, Power
Relationships, Privacy and confidentiality, power relationships, electronic junk
mail, information overload)
Internet (Internet trading, taxation, employment, nature of business, trade
barriers, censorship, child protection, internet banking, security, changing
nature of work, branch closures and job losses, radio and video)
Telecommuting (work from home), blurring between work and home,
more stress, advantagesand disadvantages)
Graham Betts

52. Issues relating to
messaging systems
•‘netiquette’ is etiquette/ manners on net
•Many people rely on messaging systems more
than spoken or face to face communication.
•written word only recipient miss out on (e.g. body
language and voice inflection)
•privacy (employers have right to read e-mail at
work)
•Spam is overloading mailboxes
•Work/ information overload from ever growing
number of emails
Graham Betts

53. Issues relating to
internet trading
employment ramifications
Effect on trade barriers and
taxation laws
Phishing and security
Graham Betts

54. Issues relating to
internet banking
•branch closures and job losses
•decreasing number of bank branches
•job losses
•changing nature of work
•security of banking details
Graham Betts

55. Physical boundaries
telecommuting is working from home
virtual organisations
national trade barriers
Graham Betts

56. Acknowledgements
Slides 11-15 were originally created by
Bob Baker and have been modified by
Graham Betts
A number of slides have been adapted
from a slide show by Loretta Kocovska
around 2001 especially the illustrations
on slides 18,39,40, 41, 42 and 43
Graham Betts