Lean Six Sigma Group Free Project Case Study Overviews http://www.linkedin.com/groups/Lean-Six-Sigma-37987
Sponsored by the International Standard for Lean Six Sigma, e-Zsigma http://www.e-zsigma.com, IQPC, and PEX Network.
Please contact Lean Six Sigma Master Black Belt, Steven Bonacorsi, Owner of the Lean Six Sigma Group to have your project case studies to be added to the Lean Six Sigma Group Library. Steve Bonacorsi sbonacorsi@comcast.net
1. Six Sigma DMAIC Project
GEITS: GEAE Account
Project Leader/Green Belt: Dan Subit
Project Leader Title: Customer Engineer
Project Start Date: 08/05/2003
Master Black Belt: Steven Bonacorsi
2. Six Sigma in Action
Redeploy Diagnostics
Customer Profile – 8, 000 Seat Aircraft Engines Manufacturing Company
Business Problem & Impact
Process Capability – Before
PC and Laptop Hardware which was surplused prior to it’s
warranty end date was not being checked for functionality prior Defect 8%
to being sold. This cost GEITS revenue by not receiving 5 Units
Success 92%
warranty claims. 55 Units
Measure & Analyze
Data Collection: Systems which were surplused <36 months
old but pulled from redeploy to be sold after 36 were measured
for functionality. As is the process was 8% defective. Z(ST) = 2.9
Root Causes: System did not have diagnostics ran when
received and technicians were unaware of the diagnostic
check procedure.
Baseline Improved
Improve & Control
All systems received at the warehouse which are <36 months Units: 60 47
old are now checked for functionality prior to being placed in Defects: 5 0
redeploy. Surplus system functionality will be checked Qrtly. A
C-chart will be used to validate and update financials. DPMO 83,333 0
Results/Benefits Z (ST) 2.88 6.0
After implementation, defects were reduced to 0 resulting in a Z (LT) 1.38 4.5
GEITS expected direct benefit of 11.4 K annually.
A savings of US$11.4K in 2003!