Tire Handling Attachments

1. SPECIAL APPLICATION PRODUCTS
Tire Handling
Designed to handle tires ranging from passenger car sizes to large mining truck wheels.
These attachments offer a safe, practical and economically method for handling tires in
various applications from warehousing to wheel replacement. This type of attachment can
be offered in a few different ways described below. As with all special application designed
units, detailed load information is required to determine the features for each attachment.
1. Dedicated Tire Manipulator DTI-Series
 Integral on Pin mounting
 Frame and arms dedicated for handling tires only
 Designed to handle large heavy tires with rim.
 Four function attachment, Clamp, Sideshift,
Frame Rotate, and Contact Pad Rotation.
 Optional joystick electronic controls.
 Various capacities and tire size ranges.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785

2. SPECIAL APPLICATION PRODUCTS
Tire Handling
2. Fork Clamp with Tire Tipping Pads
 Based on standard Fork Clamp.
 ITA Class III and IV mounting
 Slip On fork mounted arms with
powered 90 degree tipping pads to
handle a single tire.
 Slip on arms require single function
and are supplied with QD hydraulic
hose couplers.
 Tire capacities up to 5,500 lbs. and
diameters up to 85 inches.
 Typically for trucks 8,000 lbs to
15,000 lbs Capacity
 Can be offered as sideshifting or
with 360 degree frame rotation.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785

3. SPECIAL APPLICATION PRODUCTS
Tire Handling
3. Roll Clamp Design
 ITA hook mounting.
 Based on standard Pivot Arm Roll Clamp
with special contact pads.
 360 degrees frame rotation. 180 degree
stop group is available.
 Two function attachment, clamp and
rotate.
 Various size contact pads, capacities and
diameter ranges available.
 Designed to handle stack of tires for
warehousing and transport applications.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785

4. SPECIAL APPLICATION PRODUCTS
Tire Handling
4. Tire Stack Handler 50D-TSH-SP
 Specially designed to grab and compress stack of tires for loading transport trailers.
Compressing the stack to fit into the trailer, allows more tires to be shipped.
 Unit includes a specially designed mast with mounting brackets to fit truck.
 Consists of two independent top and bottom clamping frames.
 Bottom clamp based on 50D series bale clamp. Top clamp is specially modified bale clamp.
 Designed to fit 6,000 lbs capacity lift trucks.
 This is a four function unit. Top and bottom clamps are operated (raise/lower & open/close)
independently as required to handle the stack of tires.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785

5. SPECIAL APPLICATION PRODUCTS
Tire Handling
5. Hydraulic Turnafork Clamp
 This type of attachment offers the versatility of a clamp arm and fork positioner all in one.
 The fork tines can be hydraulically rotated 90 degrees from a vertical to horizontal position
and vice versa as required.
 With the tines in the horizontal position, the unit can be utilized as a fork positioner to
easily carry palletized loads. With the tines rotated to the vertical position, this unit can
clamp large tires easily.
 These are typically two function attachments
(clamp and arm rotation) but sideshifting feature
can be offered. A solenoid valve is normally used
when sideshift feature is needed.
 The fork tines can be offered with smooth facing
or various other facings. Rigid tines or
articulating are available to suit the application.
 Models available from 4,000 lbs. to 8,000 lbs.
capacity.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785

6. SPECIAL APPLICATION PRODUCTS
Tire Handling
6. Tire Chamfered Forks
 Based on a standard fork clamp with special forks.
 Forks have the top inside corners specially chamfered to handle tires. This type of chamfer
allows the forks to easily slide under the tire.
 Typically available in a 50D-CFS series, but various capacities and opening ranges and fork
sizes are available to suit a specific application.
7. Slip On Tire Pads
 Designed as a simple low cost alternative to handle
single or stack of tires.
 Must be used with a fork clamp attachment.
 Clamp forks need to have a hole drilled to secure
pads with locking pin.
 Various pad sizes available to suit application.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785