EMICoL represents a cooperative cluster group of industries predominantly made up of small to medium businesses in the manufacturing, engineering, mining and fabrication sectors of industry.
Mysore Call Girls 8617370543 WhatsApp Number 24x7 Best Services
Engineering and Manufacturing Industry Cooperative Ltd
1. EMICoL
PO BOX 1780
Malaga WA 6944
Tel:(08) 9249 3444
Fax: (08) 9249 3573
Email:emicol@tccp.com.au
Web:www.emicol.com.au
Engineering and
Manufacturing Industry
Cooperative Ltd
Capability Brochure
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
2. Company Overview
COMPANY OVERVIEW
Index
Description
Introduction
Group Summary
Group Clients
Company Overviews A - Z
Avtech Engineering
Bohler Uddeholm
Challenge Chemicals Aust
CVR Crushing
Diverse Engineering
Goodwill Engineering
Grundfos Pumps
Inter-Steel
Kingston DNA
Lightspeed Communications
MatchTech Services
Panther Powdercoating
Pedco Engineering
Pirtek Malaga
Precision Jobbing
Precision Sheet Metal
Primary Sales
Prime Motion and Control
Project Industries
Southern Wire
Sushi Digital
Swan Chamber of Commerce
Verriers Engineering Services
Wallis Drilling
West Coast Fasteners
Writewell Systems
Company Name
Summarised Group Contacts
CNC and Manual Machining Services
General Fabrication and Welding Services
Project Management Engineering and Drafting
Sheet Metal, Fabrication, Cutting, Rolling and Bending Services
Suppliers of Parts and Accessories
Providers of beneficial support and services to EMICoL members
Site Services
Sponsors of our EMICoL Cooperative
Thinking of Joining?
Page
Section 1
Section 2
Section 3
Section 4
Member
Sponsor
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Member
Sponsor
Member
Member
Member
Member
Member
}
Section 5
Section 6
Engineering and Manufacturing Industry Cooperative Limited
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Working Cooperatively to get the Job Done
Section 4
Index
3. Tech - Spec
Introduction
Members of EMICoL, the Engineering and Manufacturing Industry Cooperative Limited have worked
in partnership in producing this document of their resources.
EMICoL represents a cooperative cluster group of industries predominantly made up of small to
medium businesses in the manufacturing, engineering, mining and fabrication sectors of industry.
The quality goods produced for their clients either individually or collaboratively is testament to the
capability within the group.
EMICoL members are very keen to provide their clients with service and products that match the
requirements of Australian and International standards.
The EMICoL cooperative is in place as a conduit between the needs of industry and the capabilities
of its members. EMICoL has prepared this brochure as a tool for industry that will provide the user
with a detailed introduction to each EMICoL Member.
This Capability Brochure captures the individual capabilities of each member organisation, sponsor
or supplier and provides the end user with an opportunity to pursue a working relationship with a
single EMICoL company or group of EMICoL companies to meet project needs.
The formation of EMICoL serves to enrich the commercial capabilities of its members through
building networks, seeking commercial opportunities, sharing resources, and developing EMICoL into
a reputa-Working Cooperatively to Get the Job Done
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 1
4. Company Overview
COMPANY OVERVIEW
Group Summary
WORKSHOP SPACE
36,000 Square metres of under cover area
30,000 Square metres of yard space
WEEKLY FABRICATION CAPACITY
2,500 Boiler making hours
400 Sheet metal hours
1,250 Fitting hours
2,700 Machining hours
100 Electrical hours
WEEKLY ENGINEERING CAPACITY
700 hours (covering mechanical, structural and civil engineering and design, CAD/CAM and finite
engi-neering analysis)
WEEKLY PROJECT MANAGEMENT CAPACITY
350 Project management hours
Consulting, training and business development services available
QUALITY ASSURANCE
Members accredited to ISO 9001: 2008.
SAFETY MANAGEMENT
Members accredited to AS/NZS 4801-2001
ENVIRONMETAL MANAGEMENT SYSTEMS
Members accredited to ISO 14001:2004
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
5. Tech - Spec
Group Clients
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
6. Avtech Engineering
Avtech Engineering
6 Wildon Street
Bellevue WA 6056
Tel: (08) 9274 4122
Fax: (08) 9274 5012
Email: steve@avtech-eng.com.au
www.avtech-eng.com.au
Satisfying the customer’s requirements
by producing quality parts
Capability Statement
Avtech has been in the precision manufacturing business since 1979, specialising in
machining precision components for a diverse range of industries.
We continually invest in the latest in CNC machining technology, including a large
selection of high-tech machine tools for your precision component manufacturing.
The majority of our lathes have live milling spindles on the turret, enabling them to
complete a component in one operation, preventing multiple setups and at the same
time, providing a cost saving benefit for our customers.
Many of our CNC lathes are equipped with automatic bar feeders, allowing us to machine
larger batch quantities unattended, producing high volume machining with low labour
inputs. Our machining centres have a rotary 4th axis, with one having an extra tilting 5th
axis for more complex machining.
Our machining capability is supported by the programming department that utilises the
latest 3D CAD/CAM and 3D modelling software.
We can assist with design or provide improvement for your product with Solidworks
modelling. We also offer complete turn-key solutions to take your ideas from concept to
the manufactured component.
Our quality is backed up when required using a CMM measurement.
Our customers’ needs come first and we can manufacture their components in batch
quantities of one or two, to batches of larger quantities.
Engineering and Manufacturing Industry Cooperative Limited
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Working Cooperatively to get the Job Done
Section 4
Engineering and Manufacturing Industry Cooperative Limited
See the Tech Spec. over the page for detailed capablities
Section 4
7. TECH - SPEC
PRODUCTS
The Oil & Gas Industry
Various components for exploration, production and
recovery tools, requiring that specific materials be used
when manufacturing their components.
Mechatronics/Electronics Industry
Cases, standoffs, brackets, chassis and electromechanical components.
Materials
Hydraulics Industry
Cylinders, rams, manifolds and valve blocks
Mining Industry
Tools to support exploration & drilling areas from ‘down
the hole’ equipment to surveying tools.
We have extensive experience in machining high strength alloy steels, aluminium, brass/bronze, cast iron,
inconel, nickel, various plastics, stainless steels, exotic materials, steel & titanium for a variety of local & overseas
industries, who rely on consistent, high quality precision components manufactured on time, every time.
We manufacture components for local and international manufacturers of CNC machinery.
CAPABILITY AND SERVICES
7 x CNC turning CCentres ~ 5 with milling
CNC mill/turn ~ 2~65 dia. bar feed
CNC mill/turn ~ 2 x 350mm dia. x 950mm long chucking
3 x CNC machining centres
CNC milling (max XYZ) ~ 4 & 5 axis ~ 1,050 x 560 x 810
Okuma LT10 MYB ~ 7 axis twin chuck, twin turret both with live tooling, and one with Y axis - 50mm barfeed
Okuma LU15 MY ~ 5 axis single chuck, twin turret, one with live tooling, and Y axis-65mm barfeed
Mazak Integrex 200Y ~ 5 axis mill/turn centre
Mazak SQT/M ~ 250M single chuck, single turret with live tooling-65mm barfeed
Hardinge T42 ~ 2 axis lathe 50mm bar feed
Hardinge GT ~ 2 axis gang style tooling-27mm bar feed
Hardinge GT ~ 3 axis gang style tooling-27mm bar feed
Okuma MB56 ~ 4 Aais ~ Max spindle speed 15,000RPM, through tool coolant + 1 metre x travel
Okuma MX45 ~ 5 axis ~ max spindle speed 8,000RPM
Mori Seiki MV40 ~ 3 axis
Brown & Sharp ~ CMM x x
Camworks
Engineering and Manufacturing Industry Cooperative Limited
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Working Cooperatively to get the Job Done
8. Bohler Uddeholm
For high performance metals
Bohler Uddeholm (Australia) Pty Ltd
23-33 Gauge Circuit
Canning Vale WA 6155
Tel: (08) 9455 8672
Fax: (08) 9455 8673
Email: perth.sales@buau.com.au
www.buau.com.au
Capability Statement
Mission Statement
•
•
•
•
•
•
•
To offer the best possible service and commitment to our customers every single day.
To establish long term partnerships with our customers.
To ensure that our customers remain the centre of our attention.
To remain the leaders in quality.
To continue to regard our employees as our key asset.
To work together to achieve success.
To guarantee the highest standards of quality.
Customer Care Commitment
• You will receive friendly, courteous, prompt and efficient service at all times.
• We value the business that our customers provide.
• Our aim is to provide you with the products and service that enables us to add value
to your business.
• We will conduct our business with absolute honesty and integrity.
• Our aim is to deliver our products to you when promised.
• We will communicate openly.
• We welcome any comments you may have which will improve our service.
• Our sales people are trained and determined in ensuring that your dealings with
our company meet your expectations.
• Our staff are committed in following these customer care guidelines at all times.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
9. TECH - SPEC
PRODUCTS
Tool steel
Hollow bar
Cold work
Hot work
Plastic mould steel
High speed steel
Alloy steel
Case hardening
High tensile
Nitriding
Mild steel
Stainless steel
Non ferrous
Aluminium
Cast iron
Copper
Chrome bar
Tube
Miscellaneous
Ground flat stock
High speed steel tool bits/carbide
Forgings
Manganese
Profiles
Key steel
Knives
Silver steel
Fittings
Bronze
Brass
CAPABILITIES & SERVICEs
Cutting: 100 band saws in operation - vertical saws that can cut 1,250mm x 1,250mm x 3,600mm long to 260mm
band saws.
Machining: Grinder with a capacity of 750mm x 500mm and two milling machines, the largest having a capacity
of 2,600mm x 720mm.
Heat Treating: Our production mills in Austria and Sweden are equipped with state-of-the-art heat treatment
facilities. Details on heat treatment can be found in the various product information brochures and in support
information. For information on local heat treatment please contact your local branch.
Logistics: Before any product can be accepted into our stores, goods must have been checked against the
paperwork for conformance. With over 11,000 line items, our stores are organised to ensure prompt accurate
delivery, with corresponding paperwork and full product traceability. Customer’s will be advised as soon as it
becomes evident if delivery within 24 hours cannot be met.
Charts and Support Information
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
10. Challenge Chemicals Aust
Service with products for technology
Challenge Chemicals Aust
6 Butcher Street
Kwinana Beach WA 6167
Tel: (08) 9419 5577
Fax: (08) 9419 4958
Email: sales@challengechemicals.com.au
www.challengechemicals.com.au
Capability Statement
Challenge Chemicals Aust was established in Kwinana Beach over 28 years ago by a group of people who wished to
make a difference to the chemical industry.
Challenge Chemicals Aust is a priivately owned, totally Australian business with distributors throughout Australia.
The business has developed and grown from it humble beginnings to being a major supplier in the mining and general
industry, hospitality, food processing, transport, laundry, and water treatment sectors, as well as supplying specialty
chemicals sold under brand names. The manufacturing plant, warehouse, distribution and administration are situated
in Kwinana Beach.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
11. TECH - SPEC
PRODUCTS
Automotive
Beer line/glass cleaners
Carpet treatment
Food processing
Hand & Body
House keeping
Industrial
Kitchen
Laundry
Marine
Mining
Miscellaneous
New products
Paper products
Sundry products
Vinyl/wood floor treatments
Water treatment
CAPABILITY AND SERVICES
Quality: Quality and continuous improvements are hallmarks of Challenge Chemicals Aust operations, and
great pride is held in the fact that we are certified to ISO 9001:2000.
TECHNICAL EXPERIENCE: Challenge Chemicals Aust provide technical expertise which delivers the best result
for our customers through the knowledge of our experienced people. We constantly research and develop our
products to stay abreast of new developments and technologies.
Environment: Challenge Chemicals Aust considers the environment in which we live and work as a priority,
and are able to provide businesses with local support along with the latest technology and the changes
associated with the methods and use of chemicals.
Customer Service: By taking time to know and understand every customer’s business and their unique
requirements, Challenge Chemicals Aust have built long term relationships though consistent professional and
effective customer service.
Commitment: Challenge Chemicals Aust is committed to working to provide the most innovative and
environmentally sound chemistry, together with the best people who know how to apply it.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
12. CVR Crushing
The specialist in impact crushers, parts and
general engineering
CVR Crushing Equipment
2 Mooney Street
Bayswater, WA 6053
Tel: (08) 9370 2267
Fax: (08) 9371 6607
Email:enquiries@cvrcrushingequipment.com.au
www.cvrcrushingequipment.com.au
Capability Statement
CVR Crushing Equipment was established in 1993 and is a privately owned Australian
company. Our extensive workshop is located in Bayswater industrial area.
Directors have drawn on their 55 years of experience in the processing, mining and
mechanical fabrication industries to design and fabricate a whole series of impact
crushers. We also manufacture in-house a wide variety of spare parts for crushing
equipment items.
We also specialise in general engineering, fabrication and machining. With our variety
of equipment and qualified personnel we can manufacture those small precision type
components right through to machining or fabricating large items for your project.
CVR Crushing Equipment has built its success on business by focusing on our customers
needs backed by the commitment to supply a quality product on time every time.
When you do business with our company, you are guaranteed that the level of service,
quality and price competitiveness is second to none. At CVR, not only do we believe that
our clients are one of our greatest
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
13. TECH - SPEC
PRODUCTS
Construction and mining material handling equipment
Custom designed and standard vertical and horizontal impact crusher series
Range of 15 impact crushers in both the horizontal and vertical feed styles that will suit most
requirements. For design range capacity of impact crushers and feeders check out our website,
www.cvrcrushingequipment.com.au
Spare Parts
We supply the general crushing and mining industry with spare parts for all types of jaw crushers, cone crushers,
ball and hammer mills, screening units, conveyors, feeders, mobile and fixed crushing units. We also supply a huge
quantity of conveyor pulleys (lagged and none-lagged) to the crushing and mining Industries.
General Engineering
We supply the domestic industry with a large selection of machines and sub-assemblies along with pins, bushes,
shafts, bearing housings, pump repairs, replacement wear parts, hydraulic cylinders as well as repairs and
maintenance to all facets of equipment.Mobile and fixed machinery repairs carried out to customer’s specifications.
We have approximately 2,000sq metres under-roof in separate fabrication and machining workshops.
CAPABILITIES AND SERVICES
General Fabrication Capabilities
Full fabrication and boiler maker capabilities able of handling individual works up to 10 tonne each. We also
perform submerged arc welding, standard profile cutting, plasma cutting and laser cutting.
General Machining Capabilities
We are able to handle standard turning projects up to 5.2m in length at a diameter of 1,250mm, along with those
minor projects on our smaller machines.We have are a range of CNC machines including lathes and machining
centres that are capable of operating 24 hours a day. Our machining workshop also contains horizontal and vertical
milling machines, a 2.5m vertical borer, radial arm drills, surface grinding machines, manual lathes.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
14. Diverse Engineering
Quality service since 1986
Diverse Engineering
66 Stebbing Road
Maddington WA 6109
Tel: (08) 9493 0855
Fax: (08) 9493 0866
Email: reception@diversewa.com.au
www.diversewa.com.au
Capability Statement
Diverse Engineering is a proudly Western Australian owned and operated,
multi-disciplined engineering company that provides an array of services to the
energy, industrial, oil and gas, marine, mining and transport sectors.
Established in 1986, Diverse Engineering has developed an enviable reputation
for consistently delivering quality, cost effective engineering services to our
clients.
Diverse Engineering relocated to new premises in Maddington in 2006, allowing
the administration, machining, fabrication and mechanical departments to
operate from one location.
By designing innovative solutions, providing exceptional turnaround times and
quality workmanship, Diverse Engineering has established itself as a reliable
business partner with a wide spectrum of small and large clients, including
several market leading original equipment manufacturers.
Marine division experienced significant growth due to the acquisition of BJ
Marine in 2009 and since then, becoming agents for Yanmar, Steyr and the
Barnacle Buster product range.
The success of the business is driven by our talented management team who
ensure each division of Diverse Engineering operates under those same core
values of quality, integrity and reliability.
Our professional, technical and trades personnel cover a broad range of
disciplines, which gives Diverse Engineering the operational capacity to
undertake complex, large scale projects.
Today, Diverse Engineering’s commitment to deliver outstanding service to
every client remains as strong as it was in 1986.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
15. TECH - SPEC
PRODUCTS
Machining
Marine Division
Re-babbitt of white metal bearings, seals and thrust
pads.
Manufacturing of turbine bearings and labyrinth seals.
Manufacture of governor valve spindles, sleeves and
bushes.
Repairs and machining of large wheel motor hubs.
Hydraulic cylinder repair, design and manufacture.
Machine tool repairs and parts manufacture.
High pressure pump repairs and parts manufac-ture.
Earth moving equipment spare parts repair and
manufacture.
Pre-purchase Inspections.
Scheduled servicing.
Generator set repairs/rebuilds.
Engine and transmission repairs/rebuilds.
Propellers, shafts and stern drive repairs.
Machining and fabrication including stainless and
aluminium.
Electronic engine diagnostics.
Instrument and auto-pilot installation/repairs.
Alterations.
Re-powering.
Agents for Steyr Motors and Yanmar.
Agents for TRAC Ecological Marine Products.
Fabrication
Mechanical Repairs
Automated safety access ladders and platforms.
Design, fabrication and installation of cooling,
intake and exhaust systems to fixed and mobile
plant.
Design, fabrication and installation of safety hand
rails to fixed and mobile plant.
Tank fabrication, repairs and modifications.
Structural steel fabrication and modifications.
Crushing and screening, design and modifications.
Offshore projects.
Fully equipped mine specification field service units.
Total and partial machine overhauls.
Engine, transmission, differential and final drive rebuilds.
Mining component rebuilds.
Fleet maintenance.
Service exchange components.
Fixed and mobile plant projects and upgrades.
Vessel and offshore oil rig maintenance, repairs and
upgrades.
Shutdown services and project work.
Repairs to all types of high pressure water pumps and
accessories.
CAPABILITIES & SERVICES
Drafting, design and consulting (modelling using 3D software).
Fully equipped mobile field service units – available all hours.
Vertical boring up to 3m diameter 1.9m height.
Portable line boring, in house and on site.
Turning up to 700mm diameter x 4m long.
Milling, universal and bed mills with rotary tables and indexing capabilities.
Slotting and shaping up to 650mm stroke.
Horizontal and floor boring of large components.
Surface grinding.
Drilling.
Fully equipped workshop with machining and fabrication capabilities.
Qualified trade personnel.
On-site labour hire
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
16. Goodwill Engineering
More than just good business
Goodwill Engineering
337 Victoria Road
Malaga WA 6090
Tel: (08) 9249 3444
Fax: (08) 9249 3573
Email: gwe@goodwillengineering.com.au
www.goodwillengineering.com.au
Capability Statement
Goodwill Engineering has been operating as a light engineering business for over 30 years.
As a Quality Endorsed (ISO 9001:2008) company, all of our procedures for Quality and Occupational Health &
Safety are fully monitored and documented in line with our operations. Environmentally, we have reduced our carbon
footprint; our vision is to continually reduce our carbon footprint and operate our business to meet client & community
expectations in line with social responsibility.
Our diverse range of equipment and years of experience ensures we can offer you a variety of capabilities from
individual components, right through to sub-assemblies for various construction and mining projects.
Our manufacturing facility is able to provide a wide range of building hardware that services both housing and
commercial construction.
Our specialist range of building and fabricated products including robotic welding is listed in with technical specifications
overleaf.
Employees at Goodwill Engineering receive on the job and formal nationally accredited training in a fully equipped
working environment. All training is supported by qualified staff, including specialist ongoing support whenever
required.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
17. TECH - SPEC
Products
Construction
Engineering
Galvanised wire and rod
Stainless wire and rod
Sub-assemblies for construction projects
Cavity ties
Hoop iron & flashing
Plant equipment frames
Cleats, base plates & fittings
Access ladders
Benches and frames
Sub-assemblies for mining projects
Specialised trailers
Manholes & pit lids
CAPABILITIES AND SERVICES
Cutting
• High definition plasma cutting (material size 2mm to 25mm thick, sheet size up to 1,500mm x
2,400mm)
• Guillotine (3m wide 6mm thick)
• Ironworker- 100 tonne automatic feeder with cropping capability of flat bar up to 600mm x
15mm & 400mm x 20mm angle 152mm x 152mm x 13mm
Drilling & Punching
•
•
•
•
CNC punch 80 tonne (handling up to material sizes of 1m x 0.5m x 20mm)
Multi punching (3 heads 5mm to 25mm)
Drilling 5mm to 30mm
CNC linear punching 80 tonne up to 3m from 5mm to 50mm thick
Brake Pressing
• 150 tonne x 3.7m bed
Power Presses
• 2 tonne up to 100 tonne
Welding
• Robotic (400 amp), TIG, MIG and spot-welding of aluminium, mild and stainless steel
Threading Machines
• Up to 75mm diameter
Material Handling
• Fork truck - 3 tonne
• Truck - 6 tonne capacity - 6m lengths
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
18. Grundfos Pumps
Advanced pump solutions & water technology
Grundfos Pumps Pty Ltd
WA Sales Office
1 / 7 Marchesi Street
Kewdale WA 6105
Ph 08 9353 4595
Fax 08 9353 4596
A/h 1300 307 733
www.au.grundfos.com
contact-au@grundfos.com
Capability Statement
Grundfos is a global leader in advanced pump solutions and a trendsetter in water
technology. Grundfos contributes to global sustainability by pioneering technologies that
improve quality of life for people and care for the planet.
The Grundfos Group is represented by 80 companies in over 55 countries, and has an
annual production of more than 16 million pump units, making Grundfos one of the world’s
leading pump manufacturers.
Grundfos Pumps Pty Ltd was established in 1980, and for the past 30 years has provided
sustainable, innovative pumping solutions to customers throughout the country, covering a
range of applications. Grundfos Australia’s head office is located in Regency Park, South
Australia, with Sales Offices across the country. Grundfos Pumps Pty Ltd employs over 140
employees and has a turnover of $130million.
In 2010, Grundfos Australia opened its new facility in Ormeau, Queensland, specialising
in water treatment projects. It boasts a dedicated team of Project Engineers, a production
team and a service team enabling it to serve as the hub for water treatment engineering and
assembly activities for Australia.
In Australia, Grundfos goes to market with a range of pumping solutions within the market
segments of domestic building services, professional irrigation & agriculture, commercial
building services, utilities, mining , and industry.
The Grundfos corporate brand is based on six values that form its base and are essential for
its actions and behaviours. They ensure that Grundfos keep moving in the right directions
and help to shape Grundfos. Our values are sustainable, open and trustworthy, focused on
people, independent, partnership, and relentlessly ambitious.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
19. TECH - SPEC
PRODUCTS
Domestic Building Services
Water supply, pressure boosting, wastewater handling, drainage, heating and hot water needs in and around the home.
Professional Irrigation & Agriculture
Ground water supply, surface water supply, pressure boosting, water transfer and water treatment for agriculture and irrigation.
Commercial Building Services
Water supply, pressure boosting, wastewater handling, drainage, heating and hot water needs for buildings used for commercial
purposes (e.g. hospitals, schools, apartment buildings, office blocks etc.).
Utilities
Water intake, treatment processes, distribution, waste water collection, waste water treatment and
disposal for councils and municipalities.
Mining
Solutions for the mining sector, covering applications within dewatering and drainage, water treatment, wastewater handling, raw
water intake, dust suppression and processing.
Industry
Solutions for the transportation of fluids in manufacturing processes, such as food and beverage,
pharmaceuticals, chemicals, etc.
CAPABILITY AND SERVICES
Quality Certification AS/NZS ISO9001
Environmental Certification AS/NZS ISO14001
Safety Certification AS/NZS 4801
Provision of Test Certificate 96507895 (Certificate of Compliance with EN102042.1)
Provision of Test Certificate 96507896 (Test Certificate Non-Specific Inspection & Testing EN102042.2)
Pump testing in accordance with standard ISO9906
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
20. Inter-Steel
Providing quick turnaround for steel fabrication and
engineering manufacturers of Western Australia
Inter Steel Pty Ltd
97 Ilda Road
Canning Vale WA 6155
Tel: (08) 9256 3311
Fax: (08) 9256 3322
Email: sales@intergroup.net.au
www.intergroup.net.au
Capability Statement
Inter-Steel Pty Ltd recognise that steel fabrication and engineering manufacturers of Western Australia need a quick
turnaround from order to delivery for their profiled cut steel plate requirements.
We are also aware that the total cost of profile cutting steel in-house is prohibitive due to machine capital outlay,
operator and programming staff requirement, steel plate stock and remnant control cost, as well as the amount of
valuable floor space which is taken up by machine and stock.
Inter-Steel Pty Ltd offers its customers quick delivery response with a norm of three to four days from order to delivery.
We have even programmed and profile cut overnight especially for those customers who have urgent need and may
be located in country WA locations. This is achieved by employing top quality people who understand our customer’s
needs and requirements, and the latest profile cutting technology which includes laser, plasma, hi-definition plasma,
oxy fuel and plate drilling, slot milling, counter sinking and chamfering systems all from one location.
Utilising the latest laser, plasma and oxy fuel technology together with advanced CAD/CAM programming software,
Inter-Steel Pty Ltd has become recognised as a leading supplier of profiled cut steel plate in Western Australia.
Our many years of applications experience in the mineral processing and quarrying industries ensure that InterScreen
Aust Pty Ltd can offer the correct screening media for the application.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
21. TECH - SPEC
PRODUCTS
Cutting
At Inter-Steel Pty Ltd we offer five different cutting processes to
suit our customer’s specific requirements:
• Laser
• Plasma
• Oxy
High definition plasma with drilling, slot milling, counter boring,
counter sinking.
Laser Machines
High Definition Plasma with plate drilling, slot milling,
counter sinking and boring
Very accurate profile cutting ± 0.5mm on plate sizes of up to 4m
x 12m or more. Hi-definition plasma cut up to 50mm thick or oxy
cut up to 200mm thick. Holes drilled or slot milled in plate of up
to these sizes to a diameter of 40mm utilising the latest profile
cutting and machine drilling technology all in the one operation.
Bevel edge cut profiles ideal for accurate weld preparation.
Plasma Machines
Laser is capable of cutting up to 20mm steel, 12mm stainless Capable of cutting steel up to 50mm thick, holding two, 3.2m x
steel and 8mm aluminium. It is capable of cutting plate sizes up 12.0m plates, and of providing bevelled edges when required for
to 2.0m x 4.0m.
weld preparations.
Plate
Oxy Fuel Machines
Full range of plate specifications including AS/NZ3678 GR250 The oxy fuel machine is capable of cutting steel up to 200mm
and GR350 and a range of quench and tempered plate. Provision thick. It can cut plate up to the size of 3.2m x 12.0m. Multihead
of a full plate supply and cutting service.
cutting ensures cost-effective cutting.
CAPABILITIES AND SERVICES
All grades of steel plate - Quenched and tempered wear plate - Hard faced plate - Aluminium - Stainless steel:
All grades of metal plate and sheet from 0.5mm to 200mm in thickness cut to shape and size. Employing the latest CNC profile
cutting machinery and CADCAM programming technology, we are able to profile cut to shape and to exacting tolerances plate
sizes in excess of 12m in length and 4m in width. With advanced plate drilling, countersinking, milling and tapping capability we
offer precision drilled holes and milled slots for all plate sizes. We are also able to provide profiled cut plate components with full
bevelled edges offering cost savings to our customers when weld preparation is required.
Laser - Plasma - High definition Plasma - Oxy fuel - Plate drilling - Countersinking - Tapping - Plate milling - Bevel edged
cutting:
Our modern CNC profile plate processing operations are versatile and offer our customers service and quality with real cost savings
on laser, plasma, high definition plasma, oxy fuel, plate drilling, slot milling and edge bevelling all from one supplier.
Drafting and programming
Our state of the art computer software and highly trained personnel ensure that all material is drawn, nested and machine
programmed precisely and economically. Transitions and developments can be produced including cones and lobster backs.
Whatever shape you require we can cut it from either a dimensional drawing or DXF file. E-mail or fax your requirements and we
will take care of the rest.
Steel Stocks
Extensive stock holdings with a wide range of sizes and grades of plate.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
22. Kingston DNA
Empower your dreams - make them happen
Kingston Training and Employment
37 Hargreaves Street
Belmont WA 6104
Tel: 1300 855 503
Fax: (08) 9479 4880
Email: steveadmin@dnakingstontraining.com.au
www.dnakingstontraining.com.au
Capability Statement
Welcome to Kingston Training and Employment, a Registered Training Organisation
(‘RTO’), proudly award winning and a multi-finalist over many years, and locally owned
in Western Australia. Our training colleges are located in South Perth, Malaga, Belmont,
Mandurah, Bunbury and Geraldton.
Our organisation has been an RTO involved in training services since 1999 and is
committed to the provision of quality vocational education and training as well as industry
specific training, supporting industry training and individuals to attain careers.
One of the reasons for our success is our unique collaboration and partnership between
industry, specialist support for our students and our passionate, highly qualified staff.
We ensure that the learning experience is totally dedicated to the real needs of industry
while ensuring a challenging, rewarding and interesting programme for the participants.
Participants from all over the world attend our programmes, who bring with them a range
of learning styles, needs and expectations.
The courses are designed to include a variety of learning strategies to:
• Prepare participants for their role as a member of a specialised working team.
• Focus on the real required practical skill and knowledge to assist the workplace.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
23. TECH - SPEC
PRODUCTS
Our programmes are varied from first aid, through to supervisor management skills, advanced welding codes, communication,
marketing, OHS, forklift, white card and risk management, to name a few.
• Cert III and IV in Dental Assisting
• Diploma in Dental Technology
• Diploma of Management (Business)
• Advanced Diploma of Management (Business)
• Cert II, III and IV in Engineering (Welding)
• Cert IV in Occupational Health and Safety (OHS)
• Cert IV in Health Care (Ambulance)
• Intra-Oral Radiography
• Infection Control
CAPABILITIES AND SERVICES
Courses are designed specially to prepare your team in:
Specialised roles as a vital team member, supervisor, manager or occupational health and safety team member, maintaining
continuous professional development in the field assisting with roles in the management of change, which occurs in the workplace
organisation, pertaining also to practice and procedures.
Cert II, III and IV in Engineering (Welding) MEM20205 | CRICOS 073452A:
The following units have been selected to provide relevant skills for engineering production.
They include:
• A variety of practical fabrication techniques - MIG, TIG and manual metal arc welding
• Structural training – pipe to plate
• Safety requirements, work practices
• Use of wide range of hand and power tools
• Engineering science and measuring concepts
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
24. Lightspeed Communications
Installation and maintenance of structured cabling
and fibre optics
Lightspeed Communications
68 Gordon Road East
Osborne Park WA 6017
Tel: (08) 9200 6226
Fax: (08) 9242 3676
Email: admin@light-speed.com.au
www.light-speed.com.au
Capability Statement
Established in 2001, Lightspeed Communications has evolved to becomeone of Australia’s leading specialists in the
design, installation and maintenance of structured cabling and fibre optic communications network.
As a privately owned Western Australian based business, our quality services are recognised amongst leaders in the
manufacturing, construction, telecommunications and mining industries throughout Australia.
Our team of highly skilled technicians has more than 25 years combined experience in the design and implementation
of communication networks, ranging from office fit outs to complex fibre optic networks.
Our focus on excellence, attention to detail and our flexibility has contributed to our reputation as leaders in this niche
field.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
25. TECH - SPEC
CUSTOMERS
We have a broad client base ranging from small business to multinational corporations. We undertake
All clients are assigned an experienced project manager to ensure consistency and maintain one-on-one contact between the client
organisation and on-site personnel.
CAPABILITIES AND SERVICES
Design Consultancy
The design phase is the critical first step for any communication network. This stage provides the important foundation to ensure
outstanding performance, reliability, manageability and potential for growth.
Lightspeed Communications are designed with the most appropriate and cost-effective hardware to meet system requirements.
Structured Cabling
A structured cabling system provides the platform upon which an overall information system is built, making it a critical component
for any business.Cat5e, Cat6 and Cat6A for construction, plant facilities, camps and administration.
Lightspeed Communications has vast experience in building flexible cabling infrastructure which supports multiple voice, data,
video and multimedia systems.
Fibre Optics
We can supply, install and test all fibre optic cables and networks. Whether the requirement is for a small point-to-point connection,
a large fibre backbone network for an office or plant, or a multi-camera CCTV installation, our team can ensure the best network
is installed at an affordable cost.
Installation, termination and testing of underground, above ground and OPGW works.
Maintenance
Once a cable system has been constructed, it must be well maintained to ensure the highest level of network availability. Lightspeed
Communications is able to provide the specialist equipment, resources and knowledge to maintain your network. In addition, our
certified technicians have the expertise to swiftly repair infrastructure in the event of a cable fault.
Communications Infrastructure
Installation or upgrade of pit and pipe, cable support pathways and communication room builds.
Lightspeed Communications undertake project and service work to remote sites, both offshore and Australia wide.
LCA specialist teams are able to mobilize at a moment’s notice to provide solutions in time critical environments, as well as planned
infrastructure builds or upgrades.
Lightspeed Communications is able to provide a comprehensive service for businesses with require electrical work to be completed
during infrastructure renewal or expansion.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
26. MatchTech Services
Engineering support for WA
Matchtech Services Pty Ltd
Unit 2, 5 Mulgul Road
Malaga WA 6944
Tel: (08) 9209 2101
Fax: (08) 9209 2102
Email: chrisR@matchtech.net.au
Capability Statement
Formed in 2008 and located in Malaga, Western Australia. With over six hundred square metres of modern
manufacturing facilities, we are intent on producing a quality product and offering sensible, cost-effective solutions
to complex machining problems from concept, through design and prototype to production. We are committed to
providing a reliable service to customers who require a quality product, first time, on time, every time.
With trade and technical backgrounds, and qualifications in all aspects of machining and programming, predominately
for the aerospace, defence and motor racing segments and more recently manufacturing to API standards for the oil
and gas sectors, we have the resources, experience, ability and knowledge to meet the most stringent manufacturing
needs.
We have expertise in mechanical assembly including pipe fitting, pneumatic and hydraulic assembly and
electromechanical component assembly, the capability in software and control programming logic controllers, and
we are vendor trained and experienced with globally acknowledged leading CAD CAM and Solid Modelling solutions.
Our expertise and capability extends from our line of standard products to the design and manufacture of unique,
special purpose test and support equipment.
We believe our customers return to us because of our commitment to quality, timely delivery and follow-on customer
support.
Our business model is based on Lean Manufacturing techniques and that philosophy encompasses our entire
operation. The core value that drives our business is total customer satisfaction.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
27. TECH - SPEC
PRODUCTS
Automobile Industry
Pneumatics and Hydraulics Industry
LPG Injection components and manifolds
Complete new and reconditioned hydraulic cylinder assemblies
manifolds and control parts
Pipe Fitting
Oil & Gas Industry
Pneumatic circuits and control
Down hole, survey and control equipment
Aerospace and Defence Industries
Electromechanical
Fuel systems, air frame and control details
Plant control equipment, environmental process controls
Materials
Fabrication and finish machining of precision engineered assemblies in alloy steels, aluminium, brass, bronze, nickel alloys,
plastics, stainless steels and titanium
CAPABILITY AND SERVICES
Horizontal CNC machining in five axes (Machining Centre : twin pallet to 5003mm)
Vertical CNC machining in three axes (X: 800mm Y: 600mm Z: 750mm)
Currently utilising the most up-to-date five axis CADCAM and 3D solid modelling software packages
CNC turning (up to 500mm diameter, 1,000mm long)
Conventional milling and turning (up to 500mm diameter, 1,500mm long)
All CNC machine tools are networked to our servers enabling a DNC link
Offline CNC programming in five axes
Hydraulic and pneumatic design, manufacture & assembly
Mechanical fitting and assembly
Full manufacturing, material and documentation traceability
Extensive range of calibrated inspection equipment
Solid modelling and finite element analysis
We can program in 2,3,4, and 5D with ability for post-processing to most CNC control formats
We have considerable experience in 3D modelling and 2,3,4 and 5 axis machining, and can accept and translate all standard file
transfer formats (e.g. DXF, IGES, ITL)
Also offered are the resources, ability and integrity to partner OEM’s in the management and manufacture of research and
development projects ensuring confidentiality, the retention of intellectual property and full traceability on all stages of manufacture
on deliverables
Six hundred square metres of modern manufacturing facilities
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
28. Panther Powdercoating
A passion for powder coating
Panther Powdercoating Pty Ltd
5 Loton Avenue
Midland WA 6056
Ph: 0409 083 093
Email: ivars@pantherpowdercoating.com.au
www.pantherpowdercoating.com.au
Capability Statement
Panther Powdercoating was established to address the needs of the electronics industry
and is now providing services across a number of industries.
Panther has the cleanest powder coating facility in Perth and is aimed at business-to-business relationships.
We have a ROHS compliant pretreatment bath for aluminium.
Currently we can accept work that is up to 30kg, that has a length up to 2.2m with a width
of 1.7m.
At Panther Powdercoating we boast a stainless steel oven with double convection fans
and electrically driven heating elements so as to maintain a close tolerance of the curing
temperature.
Similarly, we have the “White House” which is our clean room where our powder coat is
applied.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
29. TECH - SPEC
PRODUCTS
Metal Signage
Decorative Glass Panels
Panther has the ability to embed high definition colour graphics Panther can encapsulate high definition photographic images
into glass panels.
into powder coat.
This new process is targeted to replace the conventional silk This new technology provides enormous scope for decorative
panelling in both a domestic and commercial environment.
screening and engraving methodologies
Uploads for this new process are accepted via our website www.panthergraphics.com.au.
CAPABILITIES AND SERVICES
Powdercoating
At Panther Powdercoating we have the “White House” which is a dedicated, dust free painting room. We wear white gowns, not to
protect ourselves, but to ensure that we don’t contaminate the painted product.
Preparation
At Panther Powdercoating we understand the importance of masking and blanking. We also take care to make sure the surface is
free of contaminants that could affect the paint quality and durability.
Grit Blasting
We can provide abrasive grit blasting as a preparation to powder coating to enhance adhesion to difficult materials such as
stainless steel.
Conversion Coating
Panther Powdercoating has ROHS compliant conversion coating for aluminium. Our conversion coatings are environmentally
friendly.
Special Colours & Effects
Special colours and effects are also available. These include hammer finish, textured, vein, glitter and pearl. Call in and see us
to discuss your needs. We hold metal colour swatches so that you can get a direct feel of the colour and texture in preference to
seeing a paper colour chart.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
30. Pedco Engineering
Steel pressing, rolling, welding and fabrication services for
medium to heavier steel plate
Pedco Engineering Pty Ltd
97-101 Poole Street
Welshpool WA 6106
Tel: (08) 9351 9463
Fax: (08) 9351 9453
Email: sales@pedco.com.au
www.pedco.com.au
Capability Statement
Pedco Engineering is a steel forming and fabrication business operating since 1987,
mainly in medium steel plate. Since its purchase from the founder in Sept 2005, it has
been transformed from a small family owned workshop with five staff to a professionally
run privately owned medium sized business with 25 staff and over 300 customers.
Our services are used in a wide variety of industries including:
• Mining
• Infrastructure
• Specialised Vehicles
• Oil & Gas
• Food
• Constructure
• Agriculture
• Environmental Engineering
Our focus on employing top quality staff, acquiring modern efficient machinery and
implementing time saving systems, ensures wastage is reduced and maximum value is
added.
Pedco Engineering enjoys a premium position and outstanding reputation in the market
by providing superior flexibility and quality workmanship, efficiency, reliability and fast
turnaround times, particularly on small jobs.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
31. TECH - SPEC
PRODUCTS
Welded shells
Rolled hand rails
Tanks for vehicle tankers
Wheel stands
Square to rounds
Truck tow hitches
Cones
Rail wagon components
Wheel bands
Cast in plates
Columns
Frames
Clamp bars
Vibrating screen frames
Light brackets
Skids for generator sets and pumps
Flanges
Access ladders
CAPABILITY AND SERVICES
Plate Bending
350ton LVD 6m long (up to 8mm thick x 6000mm long mild steel bends)
600ton Scalen 3m long (up to 25mm thick x 3000mm long mild steel, to 50mm thick on shorter bends)
280ton Scalen 4.3m long
120ton Durma 3m long
Plate Rolling
Light to heavy gauge up to 3100 long depending on radius on:
Biko 540@ 3100 long
Davmar 460 @ 3100 long
Roundo 310 @ 3100 long
Roundo 205 @ 3100 long
Section Rolling
Angles up to 125mm x 125mm x 12mm, Flat bar up to 100mm x 16mm on.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
32. Pirtek Malaga
For all your hydraulic & industrial hose requirements
Pirtek Malaga
4 / 321 Victoria Road
Malaga WA 6090
Tel: (08) 9209 3444
‘or Simply Call 134 222’
Fax: (08) 9209 3555
Email: Malaga@pirtek.com.au
www.pirtek.com.au
Capability Statement
A locally owned franchise business operating since 1999. We are part of a global network of service and supply centres
to the engineering, manufacturing and construction industries. Our focus is service; our reliable hose breakdown
service saves you time and money, getting you back up and going fast.
•
•
•
•
•
•
•
Five mobile service vehicles dedicated to servicing Malaga and surrounding areas
On call 24 hours a day, 7 days a week
Rapid response
World class products installed by qualified technicians
Complete hose & fittings management programmes
Fully equipped workshop and showroom conveniently located in Malaga
Power steering and brake hoses made while you wait
When your business depends on conveying any medium, be it fluid or gas, Pirtek, the market leader in fluid transfer
solution has the right people, with the right proucts and service, in the right place.
Phone us or just call in and check out our monthly specials available now.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
33. TECH - SPEC
PRODUCTS
Hydraulic hose
Ball valves
Hydraulic hose tails
Lubrication equipment
Hydraulic adaptors
Cable ties
Thermoplastic hose
Pneumatic products
Flexible metallic hose assemblies
Oil spill kits
PTFE Teflon hoses
Protective hose guard systems
Industrial rubber hoses
Hose reels
Industrial PVC suction & pressure hoses
Hydraulic oil
Non-conductive hose
Hydraulic tube couplings
High pressure jacking
Tube and pipe supports
Jet wash
Kamlok couplers
Water blast
Brassware products
Automotive hose
Pirtek lanolin products
Hydraulic stainless steel fittings
CEJN products
Quick connect couplings
Pirtek industrial assembly products
Instrumentation fittings
Pressure washer accessories
Clamping systems
CAPABILITIES & SERVICES
24 hours, 7 days per week on-site service
On-site hose replacement
Vendor managed stock
Equipment inspections and appraisals
Hose and fitting kitting
Hose testing and certification
Hose cleaning
Complete hose management programmes
Environmental product training
Tube bending (some locations)
Light machining
Environmental product management
Hose and fitting product training
Supply & installation of greasing and lubrication systems
Comprehensive consumption reporting
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
34. Precision Jobbing
Precision by name, accuracy by nature
Precision Jobbing
3/11 Glossop Street
Wangara WA 6065
Tel: (08) 9309 4110
Fax: (08) 9302 1190
Email: precisionjobing6@bigpond.com
Capability Statement
Established in 1984, Precision Jobbing is a small machining shop who has the capability to
carry out very precise and complex machining operations on our CNC equipment. Based
in Wangara we are in the centre of a vey busy industrial area and have a broad base of
clients throughout Australia.
Our business has been built on reliability, trust and a total commitment to our clients to
take every step in meeting their lead times. Our statistics speak for themselves; since we
took over the business nine years ago we have not lost one client. We have continually
satisfied the requirements of our customers in the agricultural, automotive, mining and
construction industries.
The owner of the business who is trade qualified, has spent the last 33 years in the ever
changing world of machining. He has exposure to working with all CNC prgrammes
and understands the technology required for the best machine set ups, in order to meet
manufacturing tolerances and current standards.
Due to our experience in the industry we are able to offer maximum efficiency on both
singular and batch production in order to give our clients those added values on all
services.
With our latest technology in CNC equipment we are able to provide customised laser
marking to your machined parts. This could just simply be the etching of part numbers or
more complicated company logos.
If you believe we can help with your product solutions then please do not hesitate in
contacting us.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
35. TECH - SPEC
PRODUCTS
Building Industry
Specialist in furnishings for doors, windows, staircases etc., for all internal and external structures.
Mining Industry
Batch sub-assemblies and individual parts for earth moving equipment and relative attachments and drill rigs.
Forestry
Batch sub-assemblies and individual parts for forestry equipment. We have regular contracts with clients on service and repair
work in this field.
Specialist Equipment
Batch production and sub–assemblies of items for any specialised projects (e.g. pipe flanges to ISO standards).
Materials
Individual and sub-assembly items in alloy steels, aluminium, brass, bronze, cast iron, Inconel, nickel, plastics, stainless, and
titanium.
CAPABILITIES AND SERVICES
Vertical CNC machining in three axes (X: 1,000mm Y: 500mm Z: 800mm)
CNC turning with live tooling (up to 230mm diameter, 550mm long plus C Axis milling).
Conventional turning (up to 600mm diameter 2,000mm long between centres).
Conventional milling (turret mill X: 700mm Y:400mm ).
Patterns built to your unique specifications using CNC tooling.
Manual slotting for internal keyways.
Full manufacturing, material and documentation traceability.
Extensive range of calibrated inspection equipment.
We can program in 2D and 3D.
150m2 of modern manufacturing facilities.
CNC laser engraving machine (working area 110mm x110mm x 200mm)
At Precision Jobbing we offer a series of light assembly work which covers soldering, gluing, pinning, pressing. We also take that
extra step and organise surface treatment and special packaging for our clients.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
36. Precision Sheet Metal
High quality sheet metal products
Precision Sheet Metal & Laser Cutting
15 Whyalla Street
Willetton WA 6155
Tel: (08) 9354 9888
Fax: (08) 9457 5699
Email: psm@iinet.net.au
Capability Statement
Our talented team specialise in providing a range of close tolerance sheet metal or sub-assembly components in
aluminium, stainless and carbon steel and other exotic materials for use in the final assembly of your project.
We also design and manufacture emergency warning equipment utilising the latest technology in LED lighting.
We are agents for MayTec extrusion which is used widely in Europe and America. This extrusion can take the place of
general SHS tubing. No welding is required; the product is anodised clear so there is no need to powder coat. If you
do require a powder finish, the anodised surface is an ideal surface for this process. MayTec extrusions are simply
cut to length, drilled for the connectors and assembled. Contact us for a solution to your framing requirements using
MayTec slotted profile systems.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
37. TECH - SPEC
PRODUCTS
Agent for supply and fabrication of Maytec aluminium
extrusions
Electrical cabinets
Machine bases
Protective and works cabins
Machine enclosures
Special shelves
Machine guarding
Plant equipment
Work stations
Display systems
Assembly and inspections stations
Exhibition cabinets and stands
Tanks
Multi-purpose frames and brackets
Partitions and protective walls
CAPABILITIES & SERVICES
Cutting
Turret punching: Omada 8 station. This machine is small and versatile, very handy for small work and small batch work. Muratec
CNC servo driven ram turret punch press. Muratec, for the first time in punch press history introduced in 1994 a new concept
in ram drive technology which incorporated a toggle mechanism driven by an AC Servo motor. Hydraulic oil-less sheet metal
processing enables ecological machine operations saving environmental, natural recourses. It has a rate of 220 hits per minute
at 25mm pitch or 600 hits per minute in nibble mode. We can punch up to 5mm carbon steel.
Laser Cutting: 8kw laser which cuts up to 8mm sheet.
Brake Pressing
One 2,400mm long and one which is 1,200mm wide. Both machines complement each other. The 1,200mm machine is brilliant
for our small work, whereas the other machine is good for up to 8mm plate, depending on the length of the material.
Guillotining
A Safan which is a highly accurate machine. Cuts from 0.4mm to 4mm carbon steel. The back stop is fully adjustable and
accurate to 0.1mm.
Grinding
A Grinding Master graining machine which can polish stainless steel to nearly number four finish, plus it deburs all our metal
work. Width of the machine is 900mm.
Captive fastener insert machine which is perfect for installation of our threaded nuts, standoffs and studs.
Welding
TIG and MIG welding of aluminium, carbon and stainless steel.
Machining
We also have a small machinery shop with two lathes and three milling machines. This is perfect for our Maytec extrusion and
associated work.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
38. Primary Sales
Innovative and cost-effective solutions to a broad spectrum
of engineering challenges
Primary Sales (Head Office)
44 Meliador Way
Midvale WA 6056
Tel: (08) 9250 3500
Fax: (08) 9250 3600
Email: sales@primarysales.com.au
www.primarysales.com.au
Capability Statement
Primary Sales Australia is a wholly owned Western Australian based company which trades nationally via substantial
premises in Midvale, Western Australia, Dubbo, NSW, and Adelaide, South Australia.
The company manufactures products in a specially designed, purpose built facility in the Midvale industrial area,17kms
from Perth. This metropolitan location has easy access to the freeway system and major truck routes to the east, north
and south.
With a large covered production and storage area of 2,000m2, well equipped with overhead gantry cranes and
cutting, forming, machining, grinding and welding machines, the company designs and manufactures both large and
small jobs associated with mining, processing and agricultural industries. Materials used include rubber, vinyl, nylon,
tungsten carbide, carbon steel, mild and stainless steel.
Primary Sales Australia is a leader by world comparison in specialised agricultural tillage and harvest tool technology.
Our core business is the design, manufacture and wholesale distribution of these leading edge products.
By-products of these activities include the application of wear-resistant materials, manufacture and refurbishment
of mechanical engineering products, manufacture of prototypes for research and development and the provision
of solutions to engineering problems. A comprehensive staff of administration, sales, engineering, production and
logistics personnel and team leaders all work to deliver outcomes which further reinforce the company’s relevance to
its marketplace.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
39. TECH - SPEC
PRODUCTS
Precision seeding machines
Crop residue management tools
Modules for disc seeding
Straw and hay management equipment
Presswheel assemblies
Wear resistant tungsten carbide application and solutions
Disc-coulters
Rotary mill component design/manufacture
Harvesting equipment
Industrial machinery manufacture/assembly
Points and seeding boots
Prototype manufacture
Combine conversions
Design, machining and fabrication for specialised mining
applications
Trial seeding equipment
CAPABILITIES AND SERVICES
Current Machinery
CNC milling machines and CNC lathe, radial arm drill, hydraulic presses, punch and shear, hydraulic pipe bender, swaging
machines, cold saws, auto bandsaw, profile cutter, MIG welders, TIG welder, plasma cutter, etc.
Manufacturing process to be applied based on available resources and machine capabilities.
Supplier Network Relationships
For laser cutting, production punching, CNC machining, patternmaking, injection moulding, rubber moulding, iron casting, heat
treatment, powder coating and zinc plating.
Services include machining, fitting and assembly, repairs and refurbishment, fabrication, wear protection and enhancement,
reverse engineering, prototype manufacture and problem solving.
Design
Mechanical, structural and agricultural design using Solidworks modelling package, including FEA. Files able to be translated to
and from many other drawing packages.
Primary Sales Australia imports material only when unable to source locally and exports products to various international
destinations.
Please contact Primary Sales Australia to discuss what we can do for you.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
40. Prime Motion and Control
Suppliers and manufacturers of hydraulic components
and systems
Prime Motion & Control
4/471 Victoria Road
Malaga WA 6090
Tel: (08) 9248 4144
Fax: (08) 9248 7677
Email: mail@primehyd.com.au
www.primehyd.com.au
SMITHS WA HAS A NEW HOME!!
We are proud to announce that as of
1st July 2013 Smith WA has a new home at
Prime Motion and Control!
Capability Statement
Prime Motion and Control was founded in 1984 as a
hydraulic sales and service company. Since that date
the company has grown by adding a number of product
ranges, milling and turning machines and increasing
staff. The company changed ownership in 2009, when
the then owner retired. With additional investment,
the company has increased its product and services
offering.
Today, prime Motion and Control is a dynamic
organization with its focus maintained on sales and
service. The company has continued to differentiate
itself from the “run of the mill” hydraulic companies by
targeting the areas of excellence in its products and
services.
Prime Motion and Control maintains a competitive
advantage in these areas and due to its size and
dynamics is able to offer a high level of service,
competitive pricing and good delivery times.
Prime Motion and Control prides itself on open and
straightforward communication with customers to
achieve common goals.
Prime Motion and Control is a Western Australian owned
and managed company employing eleven people. The
company endeavors to uphold its corporate responsibility
by adhering to all OHS legislations and policies. In
addition to this, Prime Motion and Control adds value to
the community by providing apprenticeships, training and
mentoring. Prime Motion and Control is also committed
to promoting growth from within the organisation by both
internal and external training and staff advancement
opportunities
Prime Motion and Control have officially purchased
Smith WA and as such all the stock and assembly will
be moved to our premises in Malaga. With our ISO9001
certification Prime Motion & Control will continue to
maintain the high standard of manufacture and assembly
which we have always prided ourselves on.
Steve Briggs, the former manager of Smiths WA has
joined Prime Motion & Control and will be continuing
to deliver his usual high level of service and expertise.
Steve has 19 years experience with this product and
we believe he is one of the best qualified people in the
country.
We firmly believe that Prime Motion & Control and
Smiths WA will compliment each other in many aspects
of supply, engineering and small turnkey projects
including our own cylinder and manifold manufacture.
Our engineering and R&D department will assist with
projects and can work towards a greater cost savings
solution no matter how big or small your project.
Our stock holding of Smith products is substantial and is
by far the largest nationwide.
Our new website is currently under construction for
Smiths WA and will be launched very soon for your
ordering and information reference.
All enquiries can be made to Prime on
smithswa@primehyd.com.au or by telephone
08 9248 4144.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
41. TECH - SPEC
PRODUCTS
Specialised “Prime” manufactured valves
Compact 12/24VDC power units
Manifold blocks and cartridge valves
Small and medium sized hydraulic cylinders
“C-top” manifolds
Special adaptors, fittings and machining
Manifold control systems: design, estimating and
manufacturing.
Filtration units and systems
Importers of specialised mobile load holding valves
Hydraulic power units and systems
Linak electric linear actuators
CAPABILITIES & SERVICES
Custom hydraulic training courses
Training on customer’s equipment
Hydraulic system designs and hydraulic engineering consulting
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
42. Project Industries
Innovative Engineering Solutions
Project Industries
16 Midas Road
Malaga WA 6090
Tel: (08) 9249 1586
Service 1300 FIX CRANES
Fax: (08) 9249 3494
Email: reception@projectindustries.com.au
www.projectindustries.com.au
Capability Statement
Project Industries have been designing, engineering and manufacturing for over 22 years. During that time we have
developed a reputation for design and supply of highly sophisticated and automated products in the following core
businesses:
(i) Strategic Relationships
Turnkey projects, managed utilising our in-house facilities for engineering fabrication, fitting and machining. Our focus
is to provide innovative solutions to deliver your project on time in the most cost effective manner.
(ii) Attachments
We have developed a comprehensive range of attachments, metal fabrication and engineering solutions for the
mining, agricultural and earth moving industries. These are marketed under the BOSS brand and fabricated in our
1,600m2 workshop by a highly skilled team, to suit our client requirements and Australian Standards.
See our website for attachment range: www.projectindustries.com.au
If there is a special attachment you require that is not on our website, then please contact us for assistance.
(iii) Servicing
Specialised division for site maintenance. Service agent for Palfinger Australia, for servicing and supply of parts for
your truck mounted cranes.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
43. TECH - SPEC
PRODUCTS
The Oil & Gas Industry
Fabrication of sub-assemblies in line with client requirements.
Construction and Mining Material Handling Equipment
Structural steel work, general fabrication and specialised projects (e.g. mechanical system to replace tubes in heat exchangers).
Material handling cells and conveyor ,and washer systems for mining samples.
Drill rigs and various sub-assemblies.
Agricultural Industry
Design and fabrication of forestry packages for vehicle protection.
Fabrication of numerous hinged conveyors, sub-assemblies, fit out and testing for grain transportation.
Earthmoving Attachment Industry
Tyre handlers
SWL range from 2,000SWL to 8,500SWL to suit various wheel loaders and fork trucks (for various tyre sizes).
Please see our website for full range, www.projectindustries.com.au/
CAPABILITY AND SERVICES
Ability to take client’s concepts, conduct necessary research and development, and design and produce working models. We
then have the full capability, technology and resource to project manage any ongoing contract in line with client’s requirements,
Australian standards & ISO standards.
Detailed design and drafting of earthmoving equipment for numerous original equipment manufacturers.
Designed, drafted in CAD/Solid Works with 3D modelling.
Conventional machining (turning, milling, horizontal boring).
Installation, servicing & supply of spare parts for Palfinger truck mounted cranes.
Up to 1,000 hours capacity per week of boiler-making, welding, fitting (hydraulics) and machining with qualified trade personnel.
Maintenance
Fitting of various mechanical and automated machine assemblies, erection of structural steel, and general repair work
(customised vehicles to suit project requirements).
Materials
Capability to work with carbon steel, stainless steel, aluminium and other exotic materials.
Modern under cover area of 1,600m2 (5.5m x 4.5m high doorways).
Overhead cranes with 4.5m under hook height (total SWL 8 Tonne).
Additional 3,520m2 yard area for project work or storage.
Undercover paint area.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
44. Southern Wire
Australian made and owned fencing solutions
Southern Wire Pty Ltd
311 Collier Road
Bassendean WA 6054
Tel: 08 9279 9999
Freecall: 1800 627 722
Email: office@southernwire.com.au
www.southernwire.com.au
Capability Statement
Southern Wire was established in 1993 and is a leading Australian
owned and based manufacturer of farm, security and industrial
fencing, as well as an installer of security and industrial fencing.
Our focus is on quality and innovation, insuring we offer an unrivalled
range of superior fencing products and solutions.
Products have been used to bring many successful projects to
completion, from sheep studs in WA’s Great Southern region to
airstrips in the Murchison from exotic animal enclosures in Malaysia to
cattle ranches in North America.
The quality of all products is guaranteed and backed by the full
resources of the company, which has close associations with rural
Australia.
Our guarantee:
Safety - We guarantee compliance with the most stringent safety
requirements in the industry.
Manufacturing - Choosing Southern Wire guarantees your fence is
manufactured in Australia for Australian conditions.
Project Management - Twenty years of experience and a focus on
comprehensive training ensures that Southern Wire will deliver your
project on budget, and on time.
People - Our people personify our beliefs and values.
Integrity - Southern Wire ensures outstanding customer relationships
and a level of trust that is rare in today’s business environment.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
45. TECH - SPEC
RURAL PRODUCTs
SECURITY & INDUSTRIAL
PRODUCTS
Griplock
Chainwire
Griplock Exotic
Fittings & accessories
FarmFence
Galvanized pipe
Farm gates
Garrison
Fastlock
Palisade
Fastlock Horse Fence
Security gates
Wire Netting
Weldmesh
Plain wire
Barbed wire
Strainer assemblies
CAPABILITIES & SERVICES
Personnel
Southern Wire’s policy is to recruit the most competent and experienced installers throughout WA, guaranteeing industry leading
experience and professionalism. Specific training with experienced installers helps with the expertise and development of new
staff.
Equipment and Machinery
Southern Wire has invested heavily in the latest equipment and machinery to maintain its position as the market leader. Continual
investment in new machinery and innovation helps to reduce installation time and costs, improve safety and guarantees the client
the best fence on the market.
Project Management
All company works have a dedicated project manager and project supervisor to ensure completion of the project on time and
within budget.
Track Record
Southern Wire’s track record sets it apart from its competitors.
Remote Area Work
Southern Wire continues to carry out major projects in remote/regional areas. The company has invested in extra machinery
including a rock drill to assist in those projects.
Safety
Safety is the number one priority on all Southern Wire projects, with all management and installation staff undergoing
comprehensive safety training. This is reinforced with the rigorous AS/NZS 4801 Health and Safety accreditation by Southern
wire, guaranteeing the safety and efficiency of any fencing project, and eliminating site disruption.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
46. Sushi Digital
Web Design, app development and
graphic design the smart way
Sushi Digital
First floor, 168 Stirling Higway
Nedlands WA 6009
Tel: 1300 301 988
Email: hello@sushidigital.com.au
www.sushidigital.com.au
Capability Statement
Sushi Digital Pty Ltd is a West Australian based web development and digital marketing agency specialising in smart
technologies and processes to service their clients. Borne out of the desire to being world-class web development
services to the Perth market at affordable and world-competitive rates, Sushi Digital have grown quickly to services a
range of business sizes from sole traders to large mining companies.
We have extensive capability in the web and graphic arena with over 60 full-time staff in our team and a big focus on
business analysis and commercial return on investment with all the projects we undertake. View our portfolio at http://
www.sushidigital.com.au/portfolio
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
47. TECH - SPEC
SERVICES
Custom website design and development
iPad and iPhone App development
Graphic design (logos, business cards, stationery, digital banner ads, flyer etc.)
Email marketing newsletter template design
Content management system
Social media management (SMM)
Search engine optimisation (SEO)
Complex web systems development and integration
CAPABILITIES
Over 60 full-time staff, majority in design and technical roles
Day and nightshift of technical and development staff for quick turnarounds
IT Business analysis
Project management
Systems analysis
Web 2.0
HTML 5
CSS 3
PHP / MySQL
AJAX, Javascript, jQuery
JSON / XML
Xampp
CodeIgniter
Adobe Dreamweaver
Adobe Photoshop CS5
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
48. Swan Chamber of Commerce
To build a better business environment for our members
Swan Chamber Of Commerce
1 Old Great Northern Highway
Midland WA 6056
Tel: (08) 9374 5000
Fax: (08) 9274 3369
Email: admin@swanchamber.com.au
www.swanchamber.com.au
Capability Statement
The Swan Chamber of Commerce is the peak forum for businesses in the Midland
region and is the only full-time organisation representing the business community of
Midland and surrounding areas.
We have a state-wide reputation for lobbying aggressively for what is needed for a
better business environment for the region. And we have been successful.
Every business or individual that becomes a member will benefit enormously from
being able to promote business, meet potential customers, learn about what is going
on in the region that impacts on the business community and keep informed on
business issues. If there is something you want to know and we can’t help you, we
know who can.
• Bi-Monthly newsletter.
• Monthly ‘business networking’ function.
• Regular breakfast meetings with prominent politicians.
• Regular social activities.
• Vehicle for you to gain access to prominent decision makers.
• Membership of one of the strongest and respected chambers in WA.
• Assistance in dealing with local/state and federal government on
issues affecting your business.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
49. TECH - SPEC
CAPABILITIES & SERVICES
Our Belief
Our area as the eastern gateway to Perth should be a vibrant, dynamic business focussed location, providing high appeal for all
types of business interests from rural to manufacturing, from service industry to professional.
Our Goal
To build a better business environment for our members and to transform our region into a premier choice for business operators.
Our Mission
To provide a business friendly environment, which is committed to allowing all local businesses the opportunity to flourish.
Our Commitments
The members of the Chamber Board and the various sub committees are committed to working with a singular focus for all
members of the Chamber. We are all committed to achieving our goal.
To create lasting monuments and historical record to the people and businesses, past and present, that have made Midland and
the Swan district what it is today.
To organise a series of networking functions to:
•
•
•
•
•
•
•
•
outline the impact of future growth on the region.
discuss the opportunities and issues for business growth.
present what governments and business must do to prepare.
meet up with existing members.
introduce our board and existing members to new or potential members.
hear and assist our local industry groups.
hear and assist our local educational establishments.
work with all on opportunities for business awards.
To create lasting monuments and historical record to the people and businesses, past and present, that have made Midland and
the Swan district what it is today.
To organise a series of networking functions to:
•
•
•
•
•
•
•
•
outline the impact of future growth on the region
discuss the opportunities and issues for business growth
present what Governments and business must do to prepare.
meet up with existing members
introduce our Board and existing members to new or potential members
hear and assist our local industry groups
hear and assist our local educational establishments
work with all on opportunities for business awards
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
50. Verriers Engineering Services
A “one-stop” precision machining and engineering shop
Verriers Engineering Services
5 Fairford Street
Bassendean WA 6065
Tel: (08) 9279 9311
Fax: (08) 9377 1895
Email: verrieng@iinet.net.au
Capability Statement
Verriers Engineering’s modern workshop is centrally located in the busy Bas-sendean area, utilising Tonkin Highway as an arterial road. Established in 1946, it has
kept abreast with the latest technology and that, coupled with over sixty six years
of experience in the engineering business is one of the main reasons it continually
“finds solutions to your engineering problems”.
The fully equipped workshop has high technological CNC equipment. It can perform precision machining on small to large production runs or machine larger
items such as seal rings for most crusher makes and models in its manual machine department.
Being a Department of Transport licensed vehicle repairer and modifier, it has the
capability to carry out general engineering for the transport, mining, agricultural
industries and off road enthusiasts.
Verriers Engineering can also manufacture hydraulic cylinders and components to
order. It is set up to carry out pressure testing of all cylinders after manufacture to
make sure the quality is of the highest standard required.
•
From plastic to the highest tensile steel, Verriers Engineering will find solutions for your engineering
requirements.
•
Heavy duty plant, mechanical and marine fitting is backed up by the machining and welding
departments.
• Innovation, knowledge and design skills combined with fast turnaround times ensure you get a quality
product from experienced, highly skilled machinists and general engineers.
•
Varying in size from something as small as a tow ball to 1,600mm diameter crusher component for
the mining industry, Verriers Engineering offers versatility in its machine shop.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
51. TECH - SPEC
PRODUCTS
Pneumatics and hydraulics Industry
Rail industry
Experts in providing those precision customised products in a variety of materials, castings to pipe fittings and flanges right
through to specifically cut gear wheels to carry out your mechanical or automated functions.
Mobile work benches and fixed work stations.
Safety rails, pit grating and steps.
Batch sub-assemblies and individual parts for drill rigs and other mobile equipment.
Automotive/general machinery maintenance including but not limited to:
• Dynamic balancing of rotors, fans and tail-shafts.
• Repairs and modification work to differentials, axles and drive-shafts including dynamic balancing.
• Chassis extensions.
Supply of specialised machined and fabricated parts to the rail industry.
Supply of specialised machined and fabricated parts for the mining and agricultural industry.
Tailor made lube stations.
Transport industry
Oil & gas industry
CAPABILITY & SERVICES
Engineering and precision machining
Specialised welding and fabrication
Welding and fabrication
Metal stitching, spark erosion and stud removal
Driveshaft and dynamic balancing
Reverse engineering and manufacturing
Differential repairs and modifications
Chassis extensions
Precision CNC machining in all materials
All differential, driveshaft, axle repairs and modifications
Manufacturing for transport and industrial industries
Dynamic balancing of rotors, fans and tail shafts
Onsite precision machining
Online driveline analysis
Hydraulic cylinder manufacture and testing
Custom precision machining and engineering
CNC drawing and design
Machining “one-off” and production runs
SL 40 CNC
600mm dia. x 1,300mm long
SL 30 CNC
300mm dia. x 700mm long
VMC 1200A CNC
X:1,200 Y:600 Z:1,200
TOS centre lathe
1,440mm dia. x 4,000mm long
Mitchell centre lathe
1,560mm dia. x 3,500mm long
Macson centre lathe
650mm dia. x 2,500mm long
LA centre lathe
500mm dia. x 1,700mm long
Alpha DRO programme
600mm dia. x 2,500mm long
Roku-Roku vertical mill
X:700 Y:500 Z:1,500
IM63 centre lathe
625mm dia. x 3,000mm long
Union horizontal borer
900mm x 900mm table
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
52. Wallis Drilling
Providing quality drilling solutions to our clients
Wallis Drilling Pty Ltd
54 Beaconsfield Avenue
Midvale WA 6056
Tel: (08) 9374 1111
Fax: (08) 9374 1166
Email: kevin.davis@wallisdrilling.com.au
www.wallisdrilling.com.au
Capability Statement
Wallis Drilling Pty Ltd is a West Australian based contract drilling service offering reverse circulation drilling, Wallis
aircore drilling, diamond core drilling, and grade control and blast hole drilling, all of which are suitable for mine based
or remote exploration work.
We have internal engineering capability and in-house machining, fabrication and heavy vehicle fitting and manufacture.
Mineral Drilling Services in RC, Diamond and Aircore.
• Dedicated machine shop.
• Dedicated fabrication shop.
• Dedicated vehicle workshop.
Wallis Drilling Pty Ltd operates under an Integrated Management System which includes:
• Accreditation in AS4801-2001 Occupational Health and Safety Management.
• ISO 9001-2008 Quality System.
• ISO 14001-2004 Environment Management System.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
53. TECH - SPEC
PRODUCTS
Mantis 75 aircore drill rigs
Mantis 80 aircore drill rigs
Mantis 100 aircore drill rigs
Mantis 300 aircore/diamond drill rigs
Mantis 500 aircore/diamond drill rigs
Mantis 600 aircore/diamond drill rigs
Support vehicles
Drill rods
Drill bits
Associated drilling equipment
Rig maintenance and support
Spare parts for all products
CAPABILITY AND SERVICES
Supply drilling services for mineral exploration, mine site services and coal seam gas customers.
Horizontal CNC machining.
Vertical CNC machining in three axes.
Five axis CAD/CAM and 3D solid modelling software packages.
Conventional milling and turning (up to 500mm diameter, 3,000mm long).
Off line CNC programming in five axes.
Hydraulic and pneumatic design, manufacture & assembly.
Mechanical fitting and assembly.
CNC turning (up to 300mm diameter, 1000mm long).
Boiler making and welding.
Full manufacturing, material & documentation traceability.
Extensive range of calibrated inspection equipment.
We have considerable experience in 3D modelling,2,3,4 & 5 axis machining.
2,000 square metres of modern manufacturing facilities and extensive yard/laydown area.
Onsite Training.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
54. West Coast Fasteners
We are the most reliable fastener specialist in
Western Australia
West Coast Fasteners Pty Ltd
4/13 Gibberd Road
Balcatta WA 6021
Tel: (08) 9240 2750
Fax: (08) 9240 2973
Email: westcoastfast@bigpond.com
www.westcoastfasteners.com.au
Capability Statement
West Coast Fasteners Pty Ltd is the largest independent company in WA for the supply of fasteners, servicing the
mining, agricultural, engineering and construction industries with our extensive quality range of industrial fasteners.
We stock a vast variety of fasteners in all makes of materials and sizes in our warehouse in Balcatta in order to meet
our clients demands.
We are reliable and mobile and ensure our pricing is highly competitive in the industry.
Our values are all about honesty, group decision-making, commitment and a drive for continuous improvement.
The company’s way of doing things is characterised by energy, drive and a sense of urgency. That’s why our customers
come back time and time again.
Take advantage of our same day delivery (metro only) for all current stock. If you need it fast, West Coast Fasteners
will help you get it, so please do not hesitate in contacting us for goods and technical advice.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
55. TECH - SPEC
PRODUCTS
Commercial grade Boilts & Nuts
Metric ISO Commercial Bolts & Nuts
•
•
•
•
Imperial bolts and nuts
In zinc plate are grade 2
Available in diameters of ¼” to ¾” lengths, vary
according to diameters
•
•
Metric ISO threads are grade 4.6 and are available in
black, zinc plated and galvanized finishes
Diameters available in M6 to M36
Lengths available vary with diameters
UNC/UNF Grade 5 & 8 High Tensile Bolts & Nuts
Metric Fine Grade 8.8 Bolts & Nuts
•
•
•
•
•
•
Available in black and zinc plated finishes
Diameters available from ¼” to 2”
Lengths vary according to diameters
Metric Galvanized Grade 8.8 Structural Bolts, Nuts, Flat
Washers
•
•
•
Are to Australian standard AS 1252
In diameters M12 and M36 only
Lengths vary according to diameters
Available in diameters M8 to M24
Various pitches are available
Black and zinc plated finishes
Metric ISO High Tensile Bolts & Nuts Grade 8.8
•
•
•
Available in black and zinc plated finishes
In diameters M5 to M36
Lengths vary according to diameters
Nylon Nuts Zinc Plated Class 2, 5, 8 & 10
Mechanical Anchors
•
•
•
•
•
•
•
Available in imperial threads
¼” to 2” UNC/UNF
Metric fine threads, in diameters M8 to M30
Metric coarse threads, in diameters M3 to M64
Mostly zinc plated finish
Available in various size and diameters
Range from sleeve anchors, through bolts, nylon
anchors, metal pin anchors, and many more
Chemical Anchors
Hex Head Coach Screws
•
•
•
•
•
•
•
Available in diameters M8 to M24
Available in both capsule and foil formats as well as
chemical injection systems
West Coast Fasteners uses the Powers range of
chemical injection systems for both hollow brick and
concrete
Available in both zinc and galvanized finishes
Diameters from M6 to M20
Lengths vary according to diameters
Metric only
Metric Nuts ISO Coarse and Fine Threads
Metric Nuts Fine M10 to M24 Diameters
•
•
•
•
•
Metric available in Class 5, 8, 10
Available in black, zinc and galvanized finishes
Diameters from M2 to M72
Available in zinc and black finishes only
Diameters above M24 subject to availability
Imperial Nuts
Cup Head Bolts & Nuts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Metric & imperial available
Available in grade 2, 5, 8
Available in black, zinc and galvanized finishes
BSW, UNC, UNF thread forms in diameters of 1/8” –
2” lengths
Galvanized nuts in BSW range limited
UNC/UNF available in black, zinc plated only
Available in metric and imperial thread forms
Zinc plated and galvanized finishes
Imperial diameters from ¼” to ½”
Lengths vary with diameter
Imperial sizes only available in zinc plated
Metric available in galvanized and zinc plated finishes
Diameters from M6 to M20
Lengths vary with diameters
Stainless Steel Fasteners
In grade 304 (A2) and 316 (A4). Available in both metric and imperial thread forms
We have a very comprehensive range of:
•
•
•
•
•
•
•
•
•
•
Hex head bolts
Hex set screws (fully threaded bolts)
Metal threads(pan head, counter sunk and round head, both Philips and slotted drives)
Socket screw products (Allen key drive)
Socket head cap screws
Counter sunk head cap scews
Socket set screws (grub scews)
Nuts, standard and dome available
Flat & spring washers available
Nyloc nuts available
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
56. Writewell Systems
Providing solutions to automate your products
Writewell Systems
6 Punari Place
Parkwood WA 6147
Mobile: 0421 852 237
Email: writewell@iprimus.com.au
Capability Statement
Writewell Systems was established in March 2009. We are a small automation subcontracting company who assist
clients with their electrical and control system design, programming, diagnostics and repairs.
Since its inception, Writewell Systems’ focus has been on clients in the pharmaceutical, food and industrial sectors
with the main areas of work being the diagnostics, repairs and the improvements to existing systems.
Writewell Systems have developed a client base in WA with companies that include Pfizer (Perth), the Australian Rail
Group, Logical Engineering, Wireline Engineering, and Stockbrands.
Work has also been carried out for Eastern States company, ACTS assisting their clients with diagnostics and repairs
to their control systems.
Projects undertaken are listed in with technical specifications overleaf.
The areas of expertise that have been utilised at Writewell Systems are as follows:
• Siemens S7 200 programming
• Siemens WinCC HMI updates
• Siemens S7 300 programming using Simatic Manager
• Unitronics PLC programming
• Siemens S5 programming
• ABB IRB140 and IRB340 rapid set-up and programmimg
• B&R control systems programming
• Jokab safety system design
• Mitsubishi PLC programmimg using GX Developer
• Banner safety system designs
• Siemens AC drive installation and set-up
The owner of Writewell Systems has spent the last 25 years in the electrical engineering, computer science and
pharmaceutical industries.
The experienced obtained gives Writewell Systems that in-depth knowledge required to assist you in providing solutions
to enhance or automate your products.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
Section 4
57. TECH - SPEC
PRODUCTS
Assisting at Pfizer (Perth) with improvement projects that included monitoring filling and packaging equipment, recording areas of
improvement, designing a solution, and implementing the solutions. This work has been the major part of the Writewell Systems
work over the past two years.
Assisting the Pfizer (Perth) maintenance department with the diagnostics and repairs of their filling and packaging equipment.
Some tasks have included locating and supplying replacement hardware for the control systems.
Repairs to the Australian Rail Group rail truck jack systems that included diagnostics on the PLC systems. Some tasks have taken
place in remote areas where spare parts were not available. To overcome a faulty part, the PLC was rewired and reprogrammed
utilising spare inputs and outputs, and sys-tem returned to service.
Assisting an eastern states automation company, ACTS working for Visy Automation in the installation of a robot destrapping
system at Coca Cola Amatil.
Set-up and programme a multi-robot system that included an IRB140 and an IRB340 for pick and place operations at Stockbrands
Products.
Diagnostics on B&R drives used on a shaker table at Austral Precast. The job was carried out for Global Industrial Controls (a
branch of Bunbury Industrial Controls).
CAPABILITY AND SERVICES
Ability to take client’s concepts, conduct necessary research and development, and design and produce working models in line
with Australian & ISO standards.
Programmable logic control Part 1 and 2.
Siemens S7 Prog1 PLC programming.
Siemens S20 advanced programming.
B&R PLC and servo drive programming project management techniques.
Practical data communications for engineers and technicians.
Siemens WinCC system training.
Writing winning technical documents.
Electrical contracting (WA electrical license holder).
Maintenance:
Fitting of various mechanical or automated machine assemblies.
Engineering and Manufacturing Industry Cooperative Limited
Working Cooperatively to get the Job Done
58. Verriers Engineering Services
5 Fairford Street
Bassendean WA 6065
Tel: (08) 9279 9311
Fax: (08) 9377 1895
Email: verrieng@iinet.net.au
www.verriersengineering.com.au
Wallis Drilling Pty Ltd
54 Beaconsfield Avenue
Midvale WA 6056
Tel: (08) 9374 1111
Fax: (08) 9374 1166
Email: kevin.davis@wallisdrilling.com.au
www.wallisdrilling.com.au
Avtech Engineering
6 Wildon Street
Bellevue WA 6056
Tel: (08) 9274 4122
Fax:(08) 9274 5012
Email: steve@avtech -eng.com.au
www.avtech -eng.com.au
Diverse Engineering
66 Stebbling Road
Maddington WA 6109
Tel:(08) 9493 0855
Fax:(08) 9493 0866
Email: reception@dviersewa.com.au
www.diversewa.com.au
Prime Hydraulics Pty Ltd
4/471 Victoria Road
MALAGA WA 6090
Tel: (08) 92484144
Fax: (08) 92487677
Email: mail@primehyd.com.au
www.primehyd.com.au
CNC AND MANUAL
MACHINING SERVICES
CVR Crushing Equipment
12 Mooney Street
Bayswater WA 6053
Tel:(08) 9370 2267
Fax:(08) 9371 6607
Email:enquiries@cvrcrushingequipment.com.au
www.cvrcrushingequipment.com.au
SUMMARY TO MEMBER CONTACTS AND THEIR CORE BUSINESS
Primary Sales Australia (Head Office)
44 Meliador Way
Midvale WA 6056
Tel: (08) 9250 3500
Fax:(08) 9250 3600
Email: sales@primarysales.com.au
www.primarysales.com.au
Precision Jobbing
3/11 Glossop Street
Wangara WA 6065
Tel: (08) 9309 4110
Fax: (08) 9302 1190
Email: precisionjobing6@bigpond.com
Matchtech Services Pty Ltd
Unit 2, 5 Mulgul Road
Malaga WA 6944
Tel: (08) 9209 2101
Fax: (08) 9209 2102
Email: ChrisR@matchtech.net.au
www.matchtechservices.com.au
SECTION 5
59. Wallis Drilling Pty Ltd
54 Beaconsfield Avenue
Midvale WA 6056
Tel: (08) 9374 1111
Fax: (08) 9374 1166
Email: kevin.davis@wallisdrilling.com.au
www.wallisdrilling.com.au
CVR Crushing Equipment
12 Mooney Street
Bayswater WA 6053
Tel: (08) 9370 2267
Fax: (08) 9371 6607
Email: enquiries@cvrcrushingequipment.com.au
www.cvrcrushingequipment.com.au
Goodwill Engineering
337 Victoria Road
Malaga WA 6090
Tel: (08) 9249 3444
Fax: (08) 9249 3573
Email: gwe@goodwillengineering.com.au
www.goodwillengineering.com.au
Project Industries
16 Midas Road
Malaga W.A. 6090
Tel: (08) 9249 1586 For Service (1300 Fix Cranes)
Fax: (08) 9249 3494
Email: reception@projectindustries.com.au
www.projectindustries.com.au
Verriers Engineering Services
5 Fairford Street
Bassendean WA 6065
Tel: (08) 9279 9311
Fax: (08) 9377 1895
Email: verrien@iinet.net.au
www.verriersengineering.com.au
GENERAL FABRICATION AND
WELDING SERVICES
Diverse Engineering
66 Stebbing Road
Maddington WA 6109
Tel: (08) 9493 0855
Fax: (08) 9493 0866
Email: reception@dviersewa.com.au
www.diversewa.com.au
SUMMARY TO MEMBER CONTACTS AND THEIR CORE BUSINESS
Pedco Engineering Pty Ltd
97 - 101 Poole Street
Welshpool WA 6106
Tel: (08) 9351 9463
Fax: (08) 9351 9453
Email: sales@pedco.com.au
www.pedco.com.au
Primary Sales Australia (Head Office)
44 Meliador Way
Midvale WA 6056
Tel: (08) 9250 3500
Fax:(08) 9250 3600
Email: sales@primarysales.com.au
www.primarysales.com.au
SECTION 5
60. Southern Wire Pty Ltd
311 Coller Road
Bassendean WA 6054
Tel: (08) 9279 9999
Freecall: 1800 627 722
Email:office@southernwire.com.au
www.southernwire.com.au
Verriers Engineering Services
5 Fairford Street
Bassendean WA 6065
Tel: (08) 9279 9311
Fax: (08) 9377 1895
Email: verrieng@iinet.net.au
www.verriersengineering.com.au
Wallis Drilling Pty Ltd
54 Beaconsfield Avenue
Midvale WA 6056
Tel: (08) 9374 1111
Fax: (08) 9374 1166
Email: kevin.davis@wallisdrilling.com.au
www.wallisdrilling.com.au
Writewell Systems
6 Punari Place, Parkwood
Perth, 6147 WA
Mobile: 0421 852 237
Email: uan.mepham@three.com.au
Project Industries
16 Midas Road
Malaga W.A. 6090
Tel: (08) 9249 1586 For Service (1300 Fix Cranes)
Fax: (08) 9249 3494
Email: reception@projectindustries.com.au
www.projectindustries.com.au
PROJECT MANAGEMENT,
ENGINEERING AND DRIFTING
CVR Crushing Equipment
12 Mooney Street
Bayswater WA 6053
Tel: (08) 9370 2267
Fax: (08) 9371 6607
Email: enquiries@cvrcrushingequipment.com.au
www.cvrcrushingequipment.com.au
SUMMARY TO MEMBER CONTACTS AND THEIR CORE BUSINESS
Lightspeed Communications
68 Gordon Road East
Osborne Park WA 6017
Tel: (08) 9200 6226
Fax: (08) 9242 3676
Email: admin@light -speed.com.au
www.light-speed.com.au
Primary Sales Australia (Head Office)
44 Meliador Way
Midvale WA 6056
Tel: (08) 9250 3500
Fax:(08) 9250 3600
Email: sales@primarysales.com.au
www.primarysales.com.au
Diverse Engineering
66 Stebbling Road
Maddington WA 6109
Tel:(08) 9493 0855
Fax:(08) 9493 0866
Email: reception@dviersewa.com.au
www.diversewa.com.au
SECTION 5
61. Precision Sheet Metal & Laser Cutting
15 Whyalla Street
Willetton WA 6155
Tel: (08) 9354 9888
Fax: (08) 9457 569
Email: psm@linet.net.au
Pedco Engineering Pty Ltd
97-101 Pool Street
Welshpool WA 6106
Tel:(08) 9351 9463
Fax: (08) 9351 9453
Email: sales@pedco.com.au
www.pedco.com.au
Primary Sales Australia (Head Office)
44 Meliador Way
Midvale WA 6056
Tel: (08) 9250 3500
Fax:(08) 9250 3600
Email: sales@primarysales.com.au
www.primarysales.com.au
SHEETMETAL FABRICATION,
CUTTING, ROLLING AND BENDING
SERVICES
Goodwill Engineering
337 Victoria Road
Malaga WA 6090
Tel: (08) 9249 3444
Fax:(08) 92493573
Email: gwe@goodwillengineering.com.au
www.goodwillengineering.com.au
Inter Steel Pty Ltd
97 llda Road
Canning Vale WA 6155
Tel: (08) 256 3311
Fax:(08) 9256 3322
Email:sales@intergroup.net.au
www.intergroup.net.au
SUMMARY TO MEMBER CONTACTS AND THEIR CORE BUSINESS
SECTION 5