Oséias 1: A mulher e os filhos de Oséias
•
1 gostou•312 visualizações
O profeta Oséias recebeu uma mensagem de Deus para casar-se com uma mulher adúltera e ter filhos com ela como símbolo da infidelidade do povo de Israel. Os nomes dos filhos - Jezreel, Lo-Ruama e Lo-Ami - representavam os julgamentos de Deus contra Israel por sua desobediência. Apesar disso, Deus prometeu perdoar Israel e restaurá-lo novamente.
Recomendados
Mais conteúdo relacionado
Mais procurados
Mais procurados (20)
Destaque
Destaque (17)
Semelhante a Oséias 1: A mulher e os filhos de Oséias
Semelhante a Oséias 1: A mulher e os filhos de Oséias (20)
Mais de Jezer Ferris
Mais de Jezer Ferris (20)
Oséias 1: A mulher e os filhos de Oséias
- 1. Texto Base: Oséias 1.1-11.
- 2. Palavra do SENHOR que veio a Oséias, filho de Beeri, durante os reinados de Uzias, Jotão, Acaz e Ezequias, reis de Judá, e de Jeroboão, filho de Jeoás, rei de Israel. A Mulher e os Filhos de Oséias Quando o SENHOR começou a falar por meio de Oséias, disse-lhe: “Vá, tome uma mulher adúltera e filhos da infidelidade, porque a nação é culpada do mais vergonhoso adultério por afastar-se do SENHOR”. Por isso ele se casou com Gômer, filha de Diblaim; ela engravidou e lhe deu um filho. Então o SENHOR disse a Oséias: “Dê-lhe o nome de Jezreel, porque logo castigarei a dinastia de Jeú por causa do massacre ocorrido em Jezreel, e darei fim ao reino de Israel. Naquele dia quebrarei o arco de Israel no vale de Jezreel”.
- 3. Gômer engravidou novamente e deu à luz uma filha. Então o SENHOR disse a Oséias: “Dê-lhe o nome de Lo-Ruama, pois não mais mostrarei amor para com a nação de Israel, não ao ponto de perdoá-la. Contudo, tratarei com amor a nação de Judá; e eu lhe concederei vitória, não pelo arco, pela espada ou por combate, nem por cavalos e cavaleiros, mas pelo SENHOR, o seu Deus”. Depois de desmamar Lo-Ruama, Gômer teve outro filho. Então o SENHOR disse: “Dê-lhe o nome de Lo-Ami, pois vocês não são meu povo, e eu não sou seu Deus. “Contudo os israelitas ainda serão como a areia da praia, que não se pode medir nem contar. No lugar onde se dizia a eles: ‘Vocês não são meu povo’, eles serão chamados ‘filhos do Deus vivo’.
- 4. O povo de Judá e o povo de Israel serão reunidos, e eles designarão para si um só líder, e se levantarão da terra, pois será grande o dia de Jezreel. Trd. NVI
- 5. “O SENHOR me disse: ‘Vá, trate novamente com amor sua mulher, apesar de ela ser amada por outro e ser adúltera. Ame-a como o SENHOR ama os israelitas, apesar de eles se voltarem para outros deuses e de amarem os bolos sagrados de uvas passas’. Por isso eu a comprei por cento e oitenta gramas de prata e um barril e meio de cevada’”. Oséias 3.1-2.
- 6. “"Como posso desistir de você, Efraim? Como posso entregá-lo nas mãos de outros, Israel? Como posso tratá-lo como tratei Admá? Como posso fazer com você o que fiz com Zeboim? O meu coração está enternecido, despertou-se toda a minha compaixão.” Oséias 11.8.
- 7. “Portanto, agora vou atraí-la; vou levá-la para o deserto e falar-lhe com carinho. Ali devolverei a ela as suas vinhas, e farei do vale de Acor uma porta de esperança. Ali ela me responderá como nos dias de sua infância, como no dia em que saiu do Egito” Oséias 2.15.
Notas do Editor
- Custom animation effects: rise up and shrink(Basic)To reproduce the rectangle on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 3”. In the Shape Width box, enter 10”.With the rectangle still selected, on the Home tab, in the Drawing group, do the following:Click the arrow next to Shape Fill, and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).Click the arrow next to Shape Outline, and then click No Outline.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Top.Click Align Center. To reproduce the text on this slide, do the following:On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw a text box. Enter text in the text box and select the text. On the Home tab, in the Font group, do the following:In the Font list, select Arial Black.In the Font Size box, enter 38.Click Bold. On the Home tab, in the Paragraph group, click Center to center the text in the text box.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box,click Text Fill in the left pane, select Gradient fill in the Text Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until threestops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 255,Green: 214, Blue: 63.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 75%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 255, Green: 192, Blue: 0.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 255, Green: 162, Blue: 96.Also in the Format Text Effects dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click Offset Bottom (first row, second option from the left), and then do the following:In the Transparency box, enter 70%.In the Size box, enter 100%.In the Blur box, enter 6.3 pt.In the Angle box, enter 84°.In the Distance box, enter 3.2 pt.Also in the Format Text Effects dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 2 pt, and in the Height box, enter 2 pt.Under Contour, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 215, Green: 130, Blue: 60. In the Size box, enter 1 pt. Under Surface, in the Material list, under Standard,select WarmMatte (second option from the left). In the Lighting list, under Special, select Glow (third option from the left). In the Angle box, enter 90°.On the slide, drag the text box just above the bottom edge of the rectangle.With the text box still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the line on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, horizontal line.Select the line. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 10”.Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid fill, click the button next to Color, and then select More Colors. In the Colors dialog box, on the Custom tab, enter values for Red: 255, Green: 232, Blue: 63.Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.5 pt.Also in the Format Shape dialog box, click 3-D Format in the left pane. In the 3-D Format pane, under Bevel, do the following:Click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 3 pt. Next to Top, in the Height box, enter 6 pt.On the slide, drag the line until the top edge touches the bottom edge of the rectangle.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click Custom Animation.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Basic, click Disappear.Select the animation effect (disappear effect for the text box). Under Modify: Disappear, in theStart list, selectAfter Previous.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink.Select the second animation effect (grow/shrink effect for the text box). Click the arrow to the right of the effect, and then click Effect Options. In the Grow/Shrink dialog box, do the following:On the Effect tab, in the Size list, in the Custom box, enter 400%, and then press ENTER. Also in the Size list, click Vertical. On the Timing tab, do the following:In theStart list, selectAfter Previous. In the Speed box, enter 0.01 seconds.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click More Effects. In the AddEntrance Effect dialog box, under Basic, click Appear.Select the third animation effect (appear effect for the text box). Under Modify: Appear, in theStart list, selectAfter Previous.On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink.Select the fourth animation effect (grow/shrink effect for the text box). Click the arrow to the right of the effect, and then click Effect Options. In the Grow/Shrink dialog box, do the following:On the Effect tab, in the Size list, in the Custom box, enter 25%, and then press ENTER. Also in the Size list, click Vertical. On the Timing tab, do the following:In theStart list, selectWith Previous. In the Speed list, select 1 seconds (Fast).On the slide, select the text box. In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Moderate, click Rise Up.Select the fifth animation effect (rise-up effect for the text box). Under Modify: Rise Up, do the following:In theStart list, selectWith Previous. In the Speed list, selectFast.On the slide, press and hold CTRL, and then select the rectangle and the line. In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Moderate, click Descend.Press and hold CTRL, and then select the sixth and seventh animation effects (descend effects for the rectangle and the line). Under Modify: Descend, do the following:In theStart list, selectWith Previous. In the Speed list, selectFast.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, second option from the left).
- Custom animation effects: sparkling picture(Basic)To reproduce the background effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Design tab, in the Background group, click the arrow next to BackgroundStyles, and then click Style 5 (second row, first option from the left). (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)To reproduce the picture effects on this slide, do the following:On the Insert tab, in the Illustration group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4.1” and the Width box is set to 6.7”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:Click Align to Slide.Click AlignCenter.Click AlignMiddle.Under PictureTools, on the Format tab, in the bottom right corner of the PictureStyles group, click the FormatShape dialog box launcher. In the FormatPicture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Inner clickInsideDiagonalTopRight (first row, third option from the left), and then do the following:In the Transparency box, enter 21%.In the Blur box, enter 3 pt.In the Angle box, enter 315°.In the Distance box, enter 1 pt.To reproduce the rectangle effects on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5.47”.In the ShapeWidth box, enter 7.33”. On the Home tab, in the Drawing group, click the arrow next to ShapeFill, and then under ThemeColors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click the arrow next to ShapeOutline, and then click No Outline.On the Home tab, in the Drawing group, click ShapeEffects, point to Preset, and then under Presets select Preset 8 (second row, fourth option from the left). On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then clickAlign to Slide. Point to Align, and then clickAlignCenter.Point to Align, and then clickAlignMiddle.Click Send to Back.To reproduce the first star on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Stars and Banners click 4-PointStar(first row, third option from the left). On the slide, drag to draw a four-point star.Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.69”.In the Width box, enter 0.69”. In the Rotation box, enter 15°.Select the four-point star, and then drag the yellow diamond adjustmenthandle to decrease the width of the star points. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 0%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 100%.Also in the Format Shape dialog box, in the left pane, click Line Color. In the Line Color pane, select No line. On the slide, drag the four-pointstar until it is centered on the top left corner of the rectangle.To reproduce the animation effects for the first star on this slide, do the following:On the Animations tab, in the Animations group, clickCustomAnimation. On the slide, select the four-point star.In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click MoreEffects. In the AddEntranceEffect dialog box, under Moderate, click Grow & Turn, and then click OK. With the animation effect still selected, under Modify: Grow & Turn, do the following:In the Start list, select WithPrevious. In the Speed list, selectVeryFast. Click AddEffect, point to Exit,and then click MoreEffects. In the AddExit Effect dialog box, under Moderate select Grow & Turn. With the second animation effect still selected, under Modify: Grow & Turn, do the following:In the Start list select WithPrevious. In the Speed list selectVeryFast. Click the arrow to the right of the second animation effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.7, and then click OK.To reproduce the second star with animation effects on this slide, do the following:On the slide, select the four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the second four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.62”.In the Width box, enter 0.62”. Drag the second four-point star until it is centered on the top left corner of the picture.On the slide, select the second four-point star. In the CustomAnimation task pane, do the following:Select the third animation effect (grow & turn entrance effect for the second star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.2, and then click OK.Select the fourth animation effect (grow & turn exit effect for the second star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.9, and then click OK.To reproduce the third star with animation effects on this slide, do the following:On the slide, select the second four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the third four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.77”.In the Width box, enter 0.77”. Drag the third four-point star into the top left quarter of the picture, approximately aligned diagonally with the first two stars. On the slide, select the third four-point star. In the CustomAnimation task pane, do the following:Select the fifth animation effect (grow & turn entrance effect for the third star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.4, and then click OK.Select the sixth animation effect (grow & turn exit effect for the third star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.1, and then click OK.To reproduce the fourth star with animation effects on this slide, do the following:On the slide, select the third four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the fourth four-point star onto the bottom edge of the picture, near the bottom right corner. On the slide, select the fourth four-point star. In the CustomAnimation task pane, do the following:Select the seventh animation effect (grow & turn entrance effect for the fourth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.6, and then click OK.Select the eighth animation effect (grow & turn exit effect for the fourth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.3, and then click OK.To reproduce the fifth star with animation effects on this slide, do the following:On the slide, select the fourth four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the fifth four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.83”.In the Width box, enter 0.83”. Drag the fifth four-point star until it is centered on the bottom right corner of the picture. On the slide, select the fifth four-point star. In the CustomAnimation task pane, do the following:Select the ninth animation effect (grow & turn entrance effect for the fifth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.8, and then click OK.Select the 10th animation effect (grow & turn exit effect for the fifth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.5, and then click OK.
- Custom animation effects: sparkling picture(Basic)To reproduce the background effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Design tab, in the Background group, click the arrow next to BackgroundStyles, and then click Style 5 (second row, first option from the left). (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)To reproduce the picture effects on this slide, do the following:On the Insert tab, in the Illustration group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4.1” and the Width box is set to 6.7”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:Click Align to Slide.Click AlignCenter.Click AlignMiddle.Under PictureTools, on the Format tab, in the bottom right corner of the PictureStyles group, click the FormatShape dialog box launcher. In the FormatPicture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Inner clickInsideDiagonalTopRight (first row, third option from the left), and then do the following:In the Transparency box, enter 21%.In the Blur box, enter 3 pt.In the Angle box, enter 315°.In the Distance box, enter 1 pt.To reproduce the rectangle effects on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5.47”.In the ShapeWidth box, enter 7.33”. On the Home tab, in the Drawing group, click the arrow next to ShapeFill, and then under ThemeColors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click the arrow next to ShapeOutline, and then click No Outline.On the Home tab, in the Drawing group, click ShapeEffects, point to Preset, and then under Presets select Preset 8 (second row, fourth option from the left). On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then clickAlign to Slide. Point to Align, and then clickAlignCenter.Point to Align, and then clickAlignMiddle.Click Send to Back.To reproduce the first star on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Stars and Banners click 4-PointStar(first row, third option from the left). On the slide, drag to draw a four-point star.Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.69”.In the Width box, enter 0.69”. In the Rotation box, enter 15°.Select the four-point star, and then drag the yellow diamond adjustmenthandle to decrease the width of the star points. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 0%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 100%.Also in the Format Shape dialog box, in the left pane, click Line Color. In the Line Color pane, select No line. On the slide, drag the four-pointstar until it is centered on the top left corner of the rectangle.To reproduce the animation effects for the first star on this slide, do the following:On the Animations tab, in the Animations group, clickCustomAnimation. On the slide, select the four-point star.In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click MoreEffects. In the AddEntranceEffect dialog box, under Moderate, click Grow & Turn, and then click OK. With the animation effect still selected, under Modify: Grow & Turn, do the following:In the Start list, select WithPrevious. In the Speed list, selectVeryFast. Click AddEffect, point to Exit,and then click MoreEffects. In the AddExit Effect dialog box, under Moderate select Grow & Turn. With the second animation effect still selected, under Modify: Grow & Turn, do the following:In the Start list select WithPrevious. In the Speed list selectVeryFast. Click the arrow to the right of the second animation effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.7, and then click OK.To reproduce the second star with animation effects on this slide, do the following:On the slide, select the four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the second four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.62”.In the Width box, enter 0.62”. Drag the second four-point star until it is centered on the top left corner of the picture.On the slide, select the second four-point star. In the CustomAnimation task pane, do the following:Select the third animation effect (grow & turn entrance effect for the second star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.2, and then click OK.Select the fourth animation effect (grow & turn exit effect for the second star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.9, and then click OK.To reproduce the third star with animation effects on this slide, do the following:On the slide, select the second four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the third four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.77”.In the Width box, enter 0.77”. Drag the third four-point star into the top left quarter of the picture, approximately aligned diagonally with the first two stars. On the slide, select the third four-point star. In the CustomAnimation task pane, do the following:Select the fifth animation effect (grow & turn entrance effect for the third star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.4, and then click OK.Select the sixth animation effect (grow & turn exit effect for the third star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.1, and then click OK.To reproduce the fourth star with animation effects on this slide, do the following:On the slide, select the third four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the fourth four-point star onto the bottom edge of the picture, near the bottom right corner. On the slide, select the fourth four-point star. In the CustomAnimation task pane, do the following:Select the seventh animation effect (grow & turn entrance effect for the fourth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.6, and then click OK.Select the eighth animation effect (grow & turn exit effect for the fourth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.3, and then click OK.To reproduce the fifth star with animation effects on this slide, do the following:On the slide, select the fourth four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the fifth four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.83”.In the Width box, enter 0.83”. Drag the fifth four-point star until it is centered on the bottom right corner of the picture. On the slide, select the fifth four-point star. In the CustomAnimation task pane, do the following:Select the ninth animation effect (grow & turn entrance effect for the fifth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.8, and then click OK.Select the 10th animation effect (grow & turn exit effect for the fifth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.5, and then click OK.
- Custom animation effects: sparkling picture(Basic)To reproduce the background effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Design tab, in the Background group, click the arrow next to BackgroundStyles, and then click Style 5 (second row, first option from the left). (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)To reproduce the picture effects on this slide, do the following:On the Insert tab, in the Illustration group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4.1” and the Width box is set to 6.7”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:Click Align to Slide.Click AlignCenter.Click AlignMiddle.Under PictureTools, on the Format tab, in the bottom right corner of the PictureStyles group, click the FormatShape dialog box launcher. In the FormatPicture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Inner clickInsideDiagonalTopRight (first row, third option from the left), and then do the following:In the Transparency box, enter 21%.In the Blur box, enter 3 pt.In the Angle box, enter 315°.In the Distance box, enter 1 pt.To reproduce the rectangle effects on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5.47”.In the ShapeWidth box, enter 7.33”. On the Home tab, in the Drawing group, click the arrow next to ShapeFill, and then under ThemeColors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click the arrow next to ShapeOutline, and then click No Outline.On the Home tab, in the Drawing group, click ShapeEffects, point to Preset, and then under Presets select Preset 8 (second row, fourth option from the left). On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then clickAlign to Slide. Point to Align, and then clickAlignCenter.Point to Align, and then clickAlignMiddle.Click Send to Back.To reproduce the first star on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Stars and Banners click 4-PointStar(first row, third option from the left). On the slide, drag to draw a four-point star.Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.69”.In the Width box, enter 0.69”. In the Rotation box, enter 15°.Select the four-point star, and then drag the yellow diamond adjustmenthandle to decrease the width of the star points. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 0%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 100%.Also in the Format Shape dialog box, in the left pane, click Line Color. In the Line Color pane, select No line. On the slide, drag the four-pointstar until it is centered on the top left corner of the rectangle.To reproduce the animation effects for the first star on this slide, do the following:On the Animations tab, in the Animations group, clickCustomAnimation. On the slide, select the four-point star.In the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and then click MoreEffects. In the AddEntranceEffect dialog box, under Moderate, click Grow & Turn, and then click OK. With the animation effect still selected, under Modify: Grow & Turn, do the following:In the Start list, select WithPrevious. In the Speed list, selectVeryFast. Click AddEffect, point to Exit,and then click MoreEffects. In the AddExit Effect dialog box, under Moderate select Grow & Turn. With the second animation effect still selected, under Modify: Grow & Turn, do the following:In the Start list select WithPrevious. In the Speed list selectVeryFast. Click the arrow to the right of the second animation effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.7, and then click OK.To reproduce the second star with animation effects on this slide, do the following:On the slide, select the four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the second four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.62”.In the Width box, enter 0.62”. Drag the second four-point star until it is centered on the top left corner of the picture.On the slide, select the second four-point star. In the CustomAnimation task pane, do the following:Select the third animation effect (grow & turn entrance effect for the second star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.2, and then click OK.Select the fourth animation effect (grow & turn exit effect for the second star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.9, and then click OK.To reproduce the third star with animation effects on this slide, do the following:On the slide, select the second four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the third four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.77”.In the Width box, enter 0.77”. Drag the third four-point star into the top left quarter of the picture, approximately aligned diagonally with the first two stars. On the slide, select the third four-point star. In the CustomAnimation task pane, do the following:Select the fifth animation effect (grow & turn entrance effect for the third star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.4, and then click OK.Select the sixth animation effect (grow & turn exit effect for the third star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.1, and then click OK.To reproduce the fourth star with animation effects on this slide, do the following:On the slide, select the third four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Drag the fourth four-point star onto the bottom edge of the picture, near the bottom right corner. On the slide, select the fourth four-point star. In the CustomAnimation task pane, do the following:Select the seventh animation effect (grow & turn entrance effect for the fourth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.6, and then click OK.Select the eighth animation effect (grow & turn exit effect for the fourth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.3, and then click OK.To reproduce the fifth star with animation effects on this slide, do the following:On the slide, select the fourth four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the fifth four-point star. Under DrawingTools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation: In the Height box, enter 0.83”.In the Width box, enter 0.83”. Drag the fifth four-point star until it is centered on the bottom right corner of the picture. On the slide, select the fifth four-point star. In the CustomAnimation task pane, do the following:Select the ninth animation effect (grow & turn entrance effect for the fifth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 0.8, and then click OK.Select the 10th animation effect (grow & turn exit effect for the fifth star). Click the arrow to the right of the effect, and then click Timing. In the Grow & Turn dialog box, on the Timing tab, in the Delay box, enter 1.5, and then click OK.