Design engineers searching a development platform for a low-power, high-performing and cost-sensitive H.264 IP network camera need look no further than Freescale Semiconductor. The i.MX27 IP Camera Reference Design furnishes the hardware engine and software applications to enable an OEM to add their differentiating IP or go straight to manufacture. The reference design is based on the powerful i.MX27 multimedia applications processor from Freescale, with Smart Speed technology

1. Published on Your Electronics Open Source (http://dev.emcelettronica.com)
Home > My blog > Contenuti
Freescale i.MX27 IP Camera Reference Design
By Ionela
Created Mar 24 2009 - 07:15
Design engineers searching a development platform for a low-power, high-performing and cost-sensitive
H.264 IP network camera need look no further than Freescale Semiconductor. The i.MX27 IP Camera
Reference Design furnishes the hardware engine and software applications to enable an OEM to add their
differentiating IP or go straight to manufacture. The reference design is based on the powerful i.MX27
multimedia applications processor from Freescale, with Smart Speed technology.
The i.MX27 [1] necessitates two clock inputs.
? 32.768 kHz?on-chip oscillator driving a crystal provides clocking for sleep modes and the RTC.
? The 32.768 kHz crystal can be used to clock all functions in the processor; however, because this
clock requires a large multiplication factor, the clock is not as stable.
? The 32.768 kHz is required to exit reset states properly and for the JTAG debug controller to work.
? 25 MHz?oscillator required as the primary clock. The i.MX27 can accept a crystal of 26 MHz or
an external oscillator input between 16 and 32 MHz. Because there is already a 25 MHz oscillator
for the Ethernet PHY, it will also be used for the processor input clock.
The core can be clocked at two speeds, 400 MHz and 266 MHz. For reduced power consumption, the
processor should be operated at the lowest core speed that allows the desired functionality.

2. Features
* H.264 and MPEG-4 video compression, optimized for performance and power (dual-stream
capable)
* Innovative IP camera design is powered by the high-performing, low-power Freescale i.MX27
multimedia applications processor
* Royalty-free reference design
* Aptina 2 MP CMOS sensor with integrated ePTZ
* High quality Tamron CS-mount lens with manual iris
* Integrated Power-over-Ethernet (POE)
* Embedded web server with client setup page for camera configuration and remote viewing
* Wired or wireless (802.11g) streaming
* Comprehensive software and hardware design package reduces OEM time-to-market
Included in kit
* Form-factor IP Camera with enclosure and high quality optics
* Mini-tripod
* +12V Power Supply, RJ45 cable, serial cable
* Quickstart Guide
* IPCAM Developer?s CD: Documentation, Design Files (Gerber), BOM
Network Connectivity
* Physical Interface: 10/100 Ethernet or 802.11g
* Protocols: TCP/IP, DHCP, HTTP, UDP, FTP

3. Block Diagram
[2]
Demonstration of the Freescale i.MX27 IP Camera based on the Freescale Reference Design
Hi, my name is Amanda McGregor. I work for Freescale Semiconductor as an i.MX product marketer.
Today, we are showcasing a new reference design for the IP video surveillance market. There is a growing
trend for security both in the home and in industry and this reference design is showcasing the features of
the MX27 that make it ideal for this particular market segment. So to start with, the i.MX27 is an AMD 9
based processor running at 400 MHz. It gives us enough head room to do things like running an operating
system, doing some motion detection, perhaps doing audio compression. The i.MX27 also has hardware
video compression, that?s important for taking the image through the camera and maintaining high quality
but low bandwidth over the network. We can compress in MPEG-4 and H.2644 formats up to D1
resolution. By implementing in hardware we can also save power. So that?s very important for an IP
camera system. We have an on chip Ethernet in the i.MX27 existing as we move from CCTV to digital IP
cameras. We want to use the existing cut 5K that?s running through the house and the building. We can
do that with the MX 27 at a better price point because it integrates the Ethernet controller. So that?s a key
advantage with the MX 27. We also have other connectivity. We have USB; we have SDIO so you could
do some local storage. We could also do wireless through the SDIO port or a USB port. So that?s gives
the ability to do wireless streaming of data as well. The reference design that we have today, just recently
announced, we have full hardware, software implementation. Based on the Linux, we provide all the design
files, the software, complete PSP and the camera itself. To help customers take the product, turn it quickly
and get to market you know in a shorter time frame. So, in summary the i.MX27 is an ideal balance of cost
and performance for the IP camera market and having a reference design will enable customers to get to
mark it quickly.
Read the Italian version: i.MX27 Telecamera IP da Freescale [3]
CONTACT REQUEST

4. If you want to know more about this Freescale product, please submit your request to Arrow Italy using
this form [4].
NOTE: this form is valid ONLY for Companies or Customers based in Italy and working in the Italian area.
Technology h264 iMX27 ip camera
Trademarks
Source URL: http://dev.emcelettronica.com/freescale-imx27-ip-camera-reference-design
Links:
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX27_IP_CAMERA&fsrch=1
[2] http://dev.emcelettronica.com/files/u4/IMX27_IPCAMERA_BD.jpg
[3] http://it.emcelettronica.com/imx27-telecamera-ip-da-freescale
[4] http://it.emcelettronica.com/contact/freescale