Published indian patent and design registration information june 20th 2014

The Patent Office Journal 20/06/2014 26342
पेटट कायालय
शासक य जनल
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
िनगमन सं. 25/2014 शुबवारü दनांक: 20/06/2014
ISSUE NO. 25/2014 FRIDAY DATE: 20/06/2014
पेटट कायालय का एक ूकाशन
PUBLICATION OF THE PATENT OFFICE

INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st
January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
(Chaitanya Prasad)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
20th
JUNE, 2014

CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 26345 – 26346
SPECIAL NOTICE : 26347 – 26348
EARLY PUBLICATION (DELHI) : 26349 – 26372
EARLY PUBLICATION (MUMBAI) : 26373 – 26377
EARLY PUBLICATION (CHENNAI) : 26378 – 26403
EARLY PUBLICATION ( KOLKATA ) : 26404
PUBLICATION AFTER 18 MONTHS (DELHI) : 26405 – 26513
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 26514 – 26708
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 26709 – 26715
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 26716 – 26767
PUBLICATION U/R 84(3) IN RESPECT OF APPLICATION
FOR RESTORATION OF PATENT (CHENNAI) : 26768
AMENDMENT UNDER SEC. 57 (KOLKATA) : 26769 – 26778
PUBLICATION U/R 84(3) IN RESPECT OF APPLICATION
FOR RESTORATION OF PATENT ( KOLKATA ) : 26779
RESTORATION U/S 60. ( KOLKATA ) : 26780
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF
THE GRANT (DELHI) : 26781 – 26784
THE GRANT (MUMBAI) : 26785 – 26786
THE GRANT (CHENNAI)
: 26787 – 26788
THE GRANT (KOLKATA)
: 26789 – 26790
INTRODUCTION TO DESIGN PUBLICATION : 26791
COPYRIGHT PUBLICATION : 26792
REGISTRATION OF DESIGNS : 26793 - 26836

THE PATENT OFFICE
KOLKATA, 20/06/2014
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their Territorial
Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents,
Designs & Trade Marks,
Boudhik Sampada Bhavan,
Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037
Phone: (91)(22) 24123311,
Fax : (91)(22) 24123322
E-mail: cgpdtm@nic.in
4 The Patent Office,
Government of India,
Intellectual Property Rights Building,
G.S.T. Road, Guindy,
Chennai – 600 032.
Phone: (91)(44) 2250 2081-84
Fax : (91)(44) 2250 2066
E-mail: chennai-patent@nic.in
The States of Andhra Pradesh, Karnataka,
Kerala, Tamil Nadu and the Union
Territories of Puducherry and Lakshadweep.
Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037
Phone: (91)(22) 24137701
Fax: (91)(22) 24130387
E-mail: mumbai-patent@nic.in
The States of Gujarat, Maharashtra, Madhya
Pradesh, Goa and Chhattisgarh and the Union
Territories of Daman and Diu & Dadra and Nagar
Haveli
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
The States of Haryana, Himachal Pradesh, Jammu
and Kashmir, Punjab, Rajasthan, Uttar Pradesh,
Uttaranchal, Delhi and the Union Territory of
Chandigarh.
5 The Patent Office (Head Office),
CP-2, Sector –V, Salt Lake City,
Kolkata- 700 091
Phone: (91)(33) 2367 1943/44/45/46/87
Fax: (91)(33) 2367 1988
E-Mail: kolkata-patent@nic.in
Rest of India
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970
and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received
only at the appropriate offices of the Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of
Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

पेटट कायालय
कोलकाता, दनांक 20/06/2014
कायालय के ेऽािधकार के पतेê
विभ न जगह पर ःथत पेटट कायालय के पते आंचिलक आधार पर दिशत उनके ूादेिशक अिधकार ेऽ के
साथ नीचे दए गए है:-
1 कायालय : महािनयंऽक, एकःव, अिभक प
तथा यापार िचहन,
एंटोप हल डाकघर के समीप,
एस. एम. रोड, एंटोप हल, मु बई- 400 037, भारत,
फोन: (91) (22) 24123311
फ़ै स: (91) (22) 24123322
ई. मेल: cgpdtm@nic.in
4 पेटट कायालय, भारत सरकार
इंटेले चुअल ूॉपट राइ स ब डंग, इंड ःशयल इःटेट
एसआईड सीओ आरएमड गोडाउन ए रया
एडजसे ट टु ईगल लाःक, जी. एस. ट . रोड, गाय ड
चे नई - 600 032.
फोन: (91)(44) 2250 2081-84
फ़ै स: (91)(44) 2250-2066
ई. मेल: chennai-patent@nic.in
आ ी ूदेश, कनाटक, के रल, तिमलनाडु तथा
पुडुचेर रा य ेऽ एवं संघ शािसत ेऽ, ल द प
बौ क संपदा भवन,
एंटोप हल डाकघर के समीप,
एस. एम. रोड, एंटोप हल, मु बई- 400 037,
फोन: (91) (22) 24137701
फ़ै स: (91) (22) 24130387
ई. मेल: Mumbai-patent@nic.in
गुजरात, महारा , म य ूदेश, गोवा तथा छ ीसगढ़
रा य ेऽ एवं संघ शािसत ेऽ, दमन तथा द व,
दादर और नगर हवेली.
लॉट सं. 32, से टर- 14, ारका, नई द ली- 110 075.
फोन: (91)(11) 2808 1921-25
फ़ै स: (91)(11) 2808 1920, 2808 1940
ई. मेल: delhi-patent@nic.in
ह रयाणा, हमाचल ूदेश, ज मू तथा कँमीर,
पंजाब,राजःथान, उ र ूदेश, द ली तथा उ रांचल रा य
ेऽ , एवं संघ शािसत ेऽ चंड गढ़
कोलकाता, (ूधान कायालय)
सीपी-2, से टर- V, सा ट लेक िसट ,
कोलकाता-700 091, भारत.
फोन: (91)(33) 2367 1943/44/45/46/87
फ़ै स:/Fax: (91)(33) 2367 1988
ई. मेल: kolkata-patent@nic.in
भारत का अवशेष ेऽ
वेबसाइट: http://www.ipindia.nic.in
www.patentoffice.nic.in
पेटट अिधिनयम, 1970 तथा पेटट (संशोधन) अिधिनयम, 2005 अथवा पेटट (संशोधन) िनयम, 2006 ारा वांिछत सभी आवेदन,
सूचनाए, ववरण या अ य दःतावेज़ या कोई शु क पेटट कायालय के के वल उपयु कायालय म ःवीकृ त ह गे।
शु क: शु क या तो नगद प म या Controller of Patents के नाम म देय बक सा ट या चेक के ारा भेजी जा सकती है जो उसी ःथान के
कसी अनुसूिचत बक म ूद हो जहाँ उपयु कायालय ःथत है ।

SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(Chaitanya Prasad)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.

Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.1154/DEL/2012 A
(19) INDIA
(22) Date of filing of Application :13/04/2012 (43) Publication Date : 20/06/2014
(54) Title of the invention : A system and method for providing pure water having user desired taste
(51) International classification :B01D65/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Aquamall Water Solutions LTD
Address of Applicant :Lal Tappar Industrial Area Majri Grant
Uttarakhand Pin:248 140 India
(72)Name of Inventor :
1)Suresh Kumar Sisodia
2)Nirmal J.C.Patrick
(57) Abstract :
A system for providing pure water having user desired taste includes a water inlet configured to provide water having first total
dissolved solids level a means to bi-furcate flow of water into a first flow channel and a second flow channel a reverse osmosis
membrane filter configured to remove dissolved solids from the water in first flow channel to provide water having second total
dissolved solids level at least one flow regulator configured to regulate the flow of water in second flow channel and an electronic
control device configured to facilitate user of the system to select a desired taste of an output water and regulate functioning of flow
regulator to provide water with desired taste by enabling controlled dispensing of water into the storage reservoir leading to the mixing
of water having second total dissolved solids level and water having first total dissolved solids level.
No. of Pages : 41 No. of Claims : 10

(12) PATENT APPLICATION PUBLICATION (21) Application No.3285/DELNP/2014 A
(19) INDIA
(54) Title of the invention : RECOMMENDING CONSUMER PRODUCTS USING PRODUCT INGREDIENT EFFICACY
AND/OR USER PROFILE DATA
(51) International classification :G06Q30/02
(31) Priority Document No :61/539486
(32) Priority Date :27/09/2011
(33) Name of priority country :U.S.A.
Filing Date
:PCT/US2012/057678
:27/09/2012
(87) International Publication No :WO 2013/049427
(61) Patent of Addition to Application
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SOUTHAM Adam Gyles
Address of Applicant :3746 W. Lake Calhoun Parkway
Minneapolis MN 55416 U.S.A.
1)SOUTHAM Adam Gyles
(57) Abstract :
To help consumers around the world reduce the confusion and complexity of choosing among thousands of wellness products that are
effective for their particular medical conditions and/or wellness goals the present inventor devised one or more exemplary
systems methods software and data structures for recommending products such as health fitness and nutritional products to consumers.
One exemplary system receives user profile information such as gender age medical condition(s) wellness goal(s) biometric
data allergies and sensitivities and/or nutrition information and recommends products based on the consumer profiles and product
ingredient efficacy and/or contraindications for the medical conditions and/or wellness goals. The system recommends the most
scientifically effective products for a particular consumer while accounting for contraindications thereby reducing risk potentially
harmful products. The system ultimately empowers consumers around the world to make safer and more knowledgeable decisions
regarding their own wellness.

(19) INDIA
(54) Title of the invention : HOUSEHOLD MODIFIED SEPTIC TANK
(51) International classification :C02F3/34
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SHARMA MEENA KUMARI,
Address of Applicant :DEPARTMENT OF CIVIL
ENGINEERING IIT, ROORKEE, 247667 Uttarakhand India
2)KAZMI ABSAR AHMAD
3)SARKAR SUDIPTA
1)SHARMA MEENA KUMARI,
2)KAZMI ABSAR AHMAD
3)SARKAR SUDIPTA
(57) Abstract :
A SEPTIC TANK INCORPORATING A SIMPLE DESIGN AND A HIGH DEGREE OF REMOVAL EFFICIENCY TOGETHER
WITH COST-EFFECTIVENESS IS ALWAYS DESIRED TO MAKE TREATED WATER QUALITY BETTER AND THUS TO
REDUCE THE RISK OF POLLUTION OF THE SURROUNDING ENVIRONMENT. THE UNIQUE FEATURES OF THE
PRESENT INVENTION LIE ON THE NOVEL ARRANGEMENT WASTEWATER INLET AND ALSO ON THE DIRECTION
OF FLOW OF WASTEWATER, WHICH IS IN THE VERTICALLY UPWARDS DIRECTION FROM THE BOTTOM OF THE
TANK INSTEAD OF FLOW IN THE HORIZONTAL DIRECTION WHICH IS FOLLOWED IN SEPTIC DESIGNS OF THE
PRIOR ART. THE ADVANTAGE OF THIS ARRANGEMENT IS THAT IT ALLOWS FOR THE DISCHARGE OF
WASTEWATER DIRECTLY INTO THE SLUDGE ZONE NEAR THE BOTTOM OF THE TANK FROM WHERE IT FLOWS
UPWARDS TO BE COUNTERCURRENT WITH THE SOLIDS THAT TRY TO SETTLE DOWNWARDS,THEREBY KEEPING
A SLUDGE BLANKET IN A FLOATING STATE NEAR THE BOTTOM OF THE TANK. SUCH A COUNTERCURRENT
ARRANGEMENT WITH RESPECT TO THE SETTLING SOLIDS ENSURES THE MAXIMIZATION OF CONTACT BETWEEN
THE SLUDGE CONTAINING THE ANAEROBIC BACTERIAL MAT AND THE WASTEWATER. THIS ARRANGEMENT
RESULTS IN HIGHLY EFFICIENT REMOVAL OF THE SOLIDS AND BOD IN THE SEPTIC TANK. THE PRESENT
INVENTION ALSO ALLOWS FOR AN UPGRADATION IN THE METHOD OF CLEANING OF A SEPTIC TANK OVER THE
CONVENTIONAL METHOD WHICH CONSISTS OF A COMPLETE WITHDRAWAL OR EMPTYING OF THE SETTLED
AND DIGESTED SLUDGE BY ENFORCING A PLANNED SHUTDOWN OF THE WHOLE FACILITY AND DIVERTING THE
WASTEWATER DURING THE PERIGD OF CLEANING. IN THIS NEW DESIGN, THE SLUDGE WITHDRAWL IS
PERFORMED BY OPENING OF A TELESCOPIC SLUDGE WITHDRAWL VALVE, WHICH SHALL FORCE THE
ACCUMULATED SLUDGE, UNDER HYDRAULIC HEAD, TO MOVE THROUGH A LATERAL PIPE INTO A SLUDGE
WITHDRAWL PIT WHEREFROM THE SLUDGE SHALL BE WITHDRAWN FOR SUBSEQUENT DEWATERING AND
DISPOSAL. THIS PROCESS OF SLUDGE REMOVAL CAN TAKE PLACE WHILE THE SEPTIC TANK IS IN OPERATION.
THE NEW DESIGN ONLY ALLOWS THE HEAVY DIGESTED SLUDGE AT THE BOTTOM OF THE SEPTIC TANK TO BE
DISCHARGED OUT INTO THE SLUDGE WITHDRAWL PIT. THUS, DECANTING OF THE DIGESTED SLUDGE FROM THE
TANK FACILITATES RETAINING OF SOME QUANTITY OF SLUDGE INSIDE THE TANK WHICH SHALL BE
BENEFICIAL FOR CONTINUED REMOVAL OF BOD AND SLUDGE BY THE SEPTIC TANK WITHOUT NEEDING ANY
APPRECIABLE STARTUP TIME AFTER THE CLEANING IS DONE.

(19) INDIA
(54) Title of the invention : USE OF FICUS VIRENS AIT EXTRACT AND NOVEL COMPOUND ISOLATED THEREFOM
AGAINST -HYDROXY--METHYLGLUTARYL-COA REDUCTASE INHIBITORY ACTIVITY, HYPERLIPIDEMIA AND
OXIDATIVE STRESS.
(51) International classification :C07C33/14,A61K31/365
Filing Date
:NA
:NA
(61) Patent of Addition to Application
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MOHAMMAD SALMAN KHAN
Address of Applicant :FACULTY ROOM NO. 335 &
CLINICAL BIOCHEMISTY AND NATURAL PRODUCT
RESEARCH LAB, DEPARTMENT OF BIOSCIENCES,
INTEGRAL UNIVERSITY, DASAULI, KURSI ROAD,
LUCKNOW-226026, Uttar Pradesh India
2)DANISH IQBAL
1)MOHAMMAD SALMAN KHAN
2)DANISH IQBAL
3)MD. SARFRAJ HUSSAIN
(57) Abstract :
The present study was done to evaluate the most potent antioxidant and -hydroxy-Pmethylglutaryl-CoA reductase (HMGR) inhibitor
from sequentially extracted fraction of Ficus virens Ait., as well as to isolate and purify the bioactive compound responsible for these
activity. Our results shows that of all the sequentially extracted fraction of F. virens bark and leaves extract, F. virens bark methanol
extract exhibits strong radical scavenging and antioxidant activity. In addition, F. virens bark methanol extract, which is non-
cytotoxic, significantly and most potently inhibit the HMGR activity (IC50=3.45+-0.45 ug/ml) in comparison to other extracts.
Further, the most potent bioactive fraction F18 was isolated from Ficus virens bark methanolic extract as a reddish brown crystal and
subjected to IR, 1H NMR, 13C NMR and mass spectroscopy analysis to identify this compound. Our data showed it as a novel
compound, n- Octadecanyl-0- α-D-glucopyranosyl (6+1) -0- α-D-glucopyranoside with a molecular weight of 594, that exhibits
significant HMGR inhibitory activity in vitro (98.5%) at 5pg/ml and demonstrated uncompetitive mode of inhibition against
HMGCoA reductase. Moreover, the in vivo hypolipidemic activity of FVBM extract and compound isolated therefrom were also
evaluated against Tyloxapol induced hyperlipidemia in rats. The inventor for the first time reported a significant reduction in TC, TG
and LDL-C with a increase in HDL-C level in FVBM extract (500 mglkg & 1000 mgkg) and pure bioactive compound (10mgkg)
treated rats when compared to Tyloxapol induced hyperlipidemic control rats. These findings suggest that the extract or the bioactive
compound isolated therefrom could be used in the treatment of risk factor induced hperlipidemia.

(19) INDIA
(54) Title of the invention : A Black box recorder with Satellite Transmitter (BSAT) for underwater vehicles
(51) International classification :H04B1/59
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Director General, Defence Research and Development
Organisation
Address of Applicant :Director General,Defence Research and
Development Organisation,DRDO Bhawan,Rajaji Marg, New
Delhi India
1)ABRAHAM VARUGHESE
2)MAILAPALLI NIRMALA
3)PARVATHANENI SHIVA PRASAD
4)DEBASISH CHAKRABORTI
5)SANJAY ATTARA
(57) Abstract :
Embodiments herein disclose a Black box with Satellite Transmitter (BSAT) for underwater vehicles. Embodiments herein provide
mission data backup of sunken under water vehicles and it is akin to a black box recorder of aircrafts. Disclosed herein is a method for
receiving data from an underwater vehicle via contact less communication, the BSAT placed in a sealed enclosure, wherein the BSAT
comprises of an electronic controller; an IR interface; a GPS comprising of a receiving chip and L-Band antenna; S-band antenna for
satellite communication , a conducting logic comprising of three pins; a memory to store data; and an ejection means; wherein the
method comprises of ejecting the BSAT from the vehicle by the ejection means, on detecting a pre-defined condition in the
underwater vehicle. Also, disclosed herein is a black box recorder for an underwater vehicle performing the method as disclosed
herein.

(19) INDIA
(54) Title of the invention : INFORMATION PRODUCT BUILDER, PRODUCTION AND DELIVERY SYSTEM
(51) International classification :G06Q30/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)INNODATA INDIA PRIVATE LIMITED
Address of Applicant :708 SURYA KIRAN BUILDING,
KASTURBA GANDHI MARG, NEW DELHI-110001, INDIA
1)AGRAWAL, DEEPAK
2)AGARWA, ARUN KUMAR
(57) Abstract :
Methods and Systems to provide a production and delivery system, which acts as complete solution package, having in-built dynamic
process flow designing, routing-rules, specification or data modeling capability , in-built specialized process libraries for the rapid
building of execution platform and product libraries for supporting rapid processing and transformation of information products ,
providing a mechanism for rapid process flow designing, integrated management of information products processing and data
transformation with accuracy.

(19) INDIA
(54) Title of the invention : METHOD FOR ENABLING INDEPENDENT COMPILATION OF PROGRAM AND A SYSTEM
THEREFOR
(51) International classification :G06F9/44
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)VARMA, PRADEEP
Address of Applicant :634, SECTOR 21, GURGAON,
HARYANA - 122016 a India
1)VARMA, PRADEEP
(57) Abstract :
THE PRESENT INVENTION RELATES TO A NOVEL STATIC ANALYSIS FOR THE SYSTEM BASED ON SYMBOLICALLY
RUNNING A PROGRAM AT COMPILE TIME. MORE PARTICULARLY, THE PRESENT INVENTION RELATES TO A
METHOD FOR ENABLING INDEPENDENT OR SEPARATE COMPILATION IN A MEMORY ACCESS AND
MANAGEMENT SYSTEM COMPRISING ONE OR MORE NTRAPROCEDURAL STATIC ANALYSES INCLUDING AN
ANALYSIS WITH A FIRST STEP MAPPING LAYOUTS OR TYPES TO KEYS LOCALLY, FILE-BY-FILE,OBLIVIOUSLY
FOLLOWED BY A SECOND STEP PROVIDING A RE-MAPPING OF THE LAYOUTS TO KEYS GLOBALLY, COGNIZANT
OF ALL FILES IN A PROGRAM..

(19) INDIA
(54) Title of the invention : An unrestricted, fully-source-preserving, concurrent, fully-error-handling frontend with inline schedule of
tasks and constant-space buffers
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)VARMA, Pradeep
Address of Applicant :634, Sector 21, Gurgaon, Haryana -
122016, India
1)VARMA, Pradeep
(57) Abstract :
The present disclosure provides for compilers or compiler frontends and more particularly compilers and complier front ends for
C/C++ with additional features, including (a) Long Lexenes; (b) Display Modifiers; (c) Look ahead isolation; (d) line-by-line
processing followed by tokenization; (e) complete error handlers and/or (f) precise and inline context switches. Particularly, the
present invention discloses a concurrent, wait-free compiler/compiler front-end, comprising parallel stages that carry out the steps of
character translation, line translation, macro rewriting, lexing, parsing, and handling errors in input text and translating it to an object
form.

(19) INDIA
(54) Title of the invention : NUTRITIONAL COOKIE COMPOSITION AND A PROCESS FOR PREPARING THE SAME
(51) International classification :A61K9/50
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)INDIAN COUNCIL OF AGRICULTURAL RESEARCH
(ICAR)
Address of Applicant :Krishi Anusandhan Bhawan II, PUSA
Campus, New Delhi - 110 012, India
1)M.A. Haniffa
2)P. Jeya Sheela
3)H. Mohamed Riaz
(57) Abstract :
A composition of cookie includes atleast one food grade additive and 20-25% by wt. of a Channa striatus fish powder. The atleast one
food grade additive is selected from a group that includes (a) 34% by wt. of wheat flour, (b) 15% by wt. of vanaspathi, (c) 25% by wt.
of sugar, (d) 2% by wt. of milk mist, (e) 1% by wt. of salt, (f) 1.5% by wt. of lime powder, (g) 1.5% by wt. of vanilla essence, (h) an
egg, and/or (i) combinations thereof.

(19) INDIA
(54) Title of the invention : PROCESS FOR PREPARING NUTRITIONALLY RICH DHAL POWDER AND ITS COMPOSITION
(51) International classification :A23L1/212
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Indian Council of Agricultural Research
Address of Applicant :Krishi Anusandhan Bhawan II, PUSA
Campus, New Delhi - 110 012, India
1)M.A. Haniffa
2)P. Jeya Sheela
3)H. Mohamed Riaz
(57) Abstract :
A composition of nutritional dhal powder includes at least one food grade additive and 25-30% by wt. of a Channa striatus fish
powder. The atleast one food grade additive is selected from a group that includes (a) 20% by wt. of groundnut, (b) 2% by wt. of black
pepper, (c) 2% by wt. of cumin, (d) 2% by wt. of fenugreek, (e) 3% by wt. of garlic, (f) 5% by wt. of dry red chilli, (g) 2% by wt. of
saunf (fennel), (h) 20% by wt. of urad dhal (Vigna mungo) , (i) 12% by wt. of green gram, (j) 1.5% by wt. of curry leaves, (k) 0.5% by
wt. of salt, and/or (l) combinations thereof.

(19) INDIA
(54) Title of the invention : TWELVE-TRANSISTOR STATIC RAM (SRAM) CELL
(51) International classification :G11C11/412
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Centre for Development of Advanced Computing
Address of Applicant :C-56/1, Sector-62, Noida 201307, Uttar
Pradesh, India
1)NOOR, Arti
2)V, Kumar Sampath
(57) Abstract :
Aspects of present invention relates to electronic circuit architecture for CMOS SRAM cell. Exemplary circuit design of the present
application incorporated combination of twelve pull-up and pull-down CMOS transistors to realize a power efficient and stable SRAM
cell circuit. The SRAM cell architecture can be implemented in memory devices to reduce leakage power. Stability of the cell is
improved by separating Read structure from the stored node of the cell with transistors. The delay associated with both in Read and
Write operation is minimized. The delays associated with the cell circuit are also optimized to enhance the performance of the cell by
incorporating extra transistors in SRAM cell. SRAM cell parameters like dissipation power, Read access time, and Write access time
are improved considerably by implementation of this circuit architecture.

(19) INDIA
(54) Title of the invention : POLYMERIC SUBSTRATE FOR FLEXIBLE PACKAGING SUITABLE FOR LASER MARKING
(51) International classification :B41M5/26
Filing Date
:NA
:NA
Filed on
:
:01/01/1900
Filing Date
:NA
:NA
1)CHATURVEDI, ASHOK
Address of Applicant :305, III FLOOR, BHANOT CORNER,
PAMPOSH ENCLAVE, GK-1, NEW DELHI-110048 India
1)CHATURVEDI, ASHOK
(57) Abstract :
A flexible packaging film I Laminate having a plurality of layers with at least one first-layer, and at least one sealing layer which
enables sealing; an additive which enhances the laser marking on the flexible packaging film; and a code which is laser marked on the
flexible packaging film. The additive is dispersed in at least one of the layers and enables better absorption of laser light during laser
marking and the marking thus obtained has better readability.

(19) INDIA
(54) Title of the invention : A NEW CONCEPT DESIGN FOR PET BOTTLE PROVIDING MULTIPLE POST - USAGE OPTIONS.
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)RUCHI AGARWAL
Address of Applicant :C-8, JAWAHAR QUARTERS,
MEERUT (UTTAR PRADESH)- 250001 Uttar Pradesh India
1)RUCHI AGARWAL
(57) Abstract :
A CONCEPT FOR PET BOTTLES CHARACTERIZED BY AN IDEA OF DIVIDING IT INTO TWO PARTS FROM THE
BOTTLE NECK THAT COULD BE RE-ASSEMBLED THROUGH THE SCREW MECHANISM. EVERY PART, COMBINED
WITH OTHER PARTS CAN GIVE MULTIPLE OPTIONS FOR POST-USAGE OF THE PRODUCT ALLOWING FOR A
BETTER SUSTAINABLE SYSTEM.

(19) INDIA
(54) Title of the invention : SUSPENSION SKATES
(51) International classification :A63C17/06
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SAYAR SINGH
Address of Applicant :CHAMPAPURA, KALWAR ROAD,
POST MANCHWA, JAIPUR, RAJASTHAN. India
1)SAYAR SINGH
(57) Abstract :
For skates -This abstract is created by the mechanical system of wheels. In this the jerk will be properly absorbed. It will work same in
loaded and unloaded condition and easily run in rough area. It reduce jerk with respect to the number of wheels. The chain type of
management is in the wheels which takes equal load on every wheel.

(19) INDIA
(54) Title of the invention : PORTABLE MULTI ZONE WALK THROUGH METAL DETECTOR
(51) International classification :G01V3/10
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)KULDEEP SAHDEV
Address of Applicant :House No. 153, sector 06, Panchkula,
Haryana India
1)KULDEEP SAHDEV
(57) Abstract :
The Invention is Light weight, rigid, laminated elliptical side panel and cross piece, ABS plastic boots for panel protection. The
invention is a multi zone metal detector Fully weather proof & water proof. There are six zones in the device to detect the presence of
metal and its body is made up of plastic body so that it can easily be ported.

(19) INDIA
(54) Title of the invention : AN INSECTICIDAL COMBINATION OF DIAFENTHIURON AND ACETAMIPRID IN WETTABLE
POWER FORM
(51) International classification :A01N47/44
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)INSECTICIDES (INDIA) LIMITED
Address of Applicant :INSECTICIDES (INDIA) LIMITED,
AN INDIAN COMPANY, 401-402, LUSA TOWER, AZADPUR
COMMERICAL COMPLEX DELHI-110033 India
1)DR. MUKESH KUMAR
(57) Abstract :
The present invention relates to an synergistic insecticidal composition of Diafenthiuronamount ranging from 25 to 40% by weight
and Acetamiprid amount ranging from 5 -15% by weight of the composition in a wettable powder form. The invention hrther relates to
a process of preparation thereof.

(19) INDIA
(54) Title of the invention : SUGAR FREE DRAKSHA ASAVA
(51) International classification :A61K
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)LOVELY PROFESSIONAL UNIVERSITY
Address of Applicant :L-P-U BLOCK-3B PHARMACY
PHAGWARA PUNJAB-144402 India
1)BARINDER KAUR
2)SAURABH SINGH
(57) Abstract :
Sugar free Draksha Asava is completely herbal fermented liquid preparation. It is free from both the sugars ( reducing as well as non -
reducing )while it contains not more than 10% and not more than 3% of self generated Alcohol in the preparation over a period of
time. It has therapeutic value for Piles, Tastelessness, Heart diseases, Anemia, Wound, Cachexia and Fever and can be specially used
by Diabetic patients with a fix dose of 15 - 30ml with equal amount of water for all the diseases.

(19) INDIA
(54) Title of the invention : ANTI-THEFT BIKE STAND LOCK
(51) International classification :B62H5/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SANDHAR CENTER FOR INNOVATION &
DEVELOPMENT
Address of Applicant :3, HSIIDC INDUSTRIAL AREA,
SECTOR-18, GURGAON, HARYANA-122015 India
1)NAIK D.K.
2)MISHRA HEMANT
(57) Abstract :
The anti-theft bike stand lock deals with a locking mechanism for main stand / center stand of a two -wheeled vehicle i.e, motor bike
that activates once the vehicle is put on its main stand i.e. standing / parking condition, thereby locking the main stand and restricting
its movement. The locking mechanism comprises of a latch unit with a striker being mounted on main stand which forces the latch
links to get engaged (locked state) while parking the vehicle on main stand and inhibits stand latch links disengagement until the latch
unit is unlocked by operating a key into the key lock provided for the purpose.

(19) INDIA
(54) Title of the invention : Honey Bee Sampling Device
Filing Date
:PCT// /
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Bandral Rakesh Singh
Address of Applicant :Dr R.S. Bandral, Program Coordinator,
Krishi Vigyan Kendra, Doda at Bhaderwah, Sher-e- Kashmir
University of Agricultural Sciences & Technology of Jammu, P.O.
Udharana-182221 Tehsil: Bhaderwah, District: Doda, Jammu &
Kashmir India
1)Bandral Rakesh Singh
2)Bandral Julie Dogra
(57) Abstract :
Honey bee sampling device for sampling bees in the field of agriculture is disclosed. It is very irritating and unsafe to sample honey
bees for investigations. So, keeping in view this problem, a bee sampling device has been devised. The device comprises of a chamber
(1) closed at the top (2) and open at the bottom (3), a suction tube (6) incised in such a manner to provide the inbuilt netting frame
work (7) with plurality of spikes (8), an inlet tube (12), an inlet tube lid (17), preferably a sampling centrifuge tube (24) and a sliding
lid (28). The suction tube (6) and inlet tube (12) connected with polyvinyl chloride transparent hoses (10 & 22). By virtue of suction,
the target bee forced to drop in the sampling centrifuge tube 24. Finally, sampled honey bees (29) carried for the investigations,
preferably in the centrifuge tube or zip lock poly bag or plastic vials.

(19) INDIA
(54) Title of the invention : FROZEN DESSERT
(51) International classification :A23G9/04
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)VIJAY RIKHIRAM ARORA
Address of Applicant :W-79, GREATER KAILASH-II, NEW
DELHI-110048, INDIA.
1)VIJAY RIKHIRAM ARORA
(57) Abstract :
The invention relates to a low fat, pure vegetarian nutritious frozen dessert and a process for producing the same. The frozen dessert
does not contain any synthetic ingredient or artificial colour, flavour or preservative. In one embodiment of the invention the frozen
dessert is sugar free, thus it is very suitable for consumption by the diabetic persons or individuals who wants to avoid sugar from their
diets. The frozen dessert of the present invention has low fat content and high nutritional value still having texture and organoleptic
properties comparable with that of the conventional frozen desserts.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR DETECTING, INDENTIFYING AND CLSSIFYING CANCER CELLS
(51) International classification :G01B9/021
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DILLU, VENUS
Address of Applicant :SBTF-4, SCIENCE BLOCK, THIRD
FLOOR, APPLIED PHYSICS DEPARTMENT DELHI
TECHNOLOGICAL UNIVERSITY ( FORMERLY: DELHI
COLLEGE OF ENGINEERING) BNAWANA ROAD, DELHI-
110042 India
2)SINHA, RAVINDRA KUMAR
1)DILLU, VENUS
2)SINHA, RAVINDRA KUMAR
(57) Abstract :
The present disclosure provides a sensing system, a sensing device and a method thereof. A waveguide based configuration
comprising an array of metal rods arranged periodically in a lattice is provided. The array of metal rods is embedded in a substrate
forming a fortified core in a predefined manner. The array of metal rods comprises one sensing arm to place biological material to be
detected. The array of metal rods when exposed to the optical device produces plasmons due to interaction between nano particles
associated with the array of metal rods and light received from the optical device and thus causes changes in wave parameters. The
changes are sensed in order to sense the biological material. The wave parameters so sensed are used to classify the biological material
in order to obtain a classified biological material, wherein the wave parameters are compared to predetermined wave parameters to
classify the biological material.

(19) INDIA
(54) Title of the invention : HAND HELD METAL DETECTOR
(51) International classification :G01V3/11
Filing Date
:PCT// /
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)KULDEEP SAHDEV
Address of Applicant :House No. 153, sector 06, Panchkula,
Haryana India
1)KULDEEP SAHDEV
(57) Abstract :
The present invention is a metal detecting device which is used to detect the matals during security checks at the entrance of highly
sensitive areas i.e. Airports, Bus terminus, Railway stations etc. The earlier used conventional Metal detector are not able to detect the
small metals like Gold, SIM, Blade. In the present invention the search coil is made up of copped and is integrated in the Printed
Circuit Board and the use of microprocessor help it to detect the small metals even after having very low frequency.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR FINDING DUPLICATE AND NEAR-DUPLICATE DOCUMENTS
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Centre for Development of Advanced Computing
Address of Applicant :C-56/1, Sector-62, Noida 201307, Uttar
Pradesh, India
2)Secretary, Department of Electronics and Information
Technology
1)PAL, Om
2)PRAKASH, Rishi
3)SRIVASTAVA, Praveen Kumar
(57) Abstract :
The present invention provides a method and system for efficiently finding a duplicate and/or a near-duplicate document from one or
more databases by generating a unique document value for search/input document and also for every document stored in the one or
more databases and comparing document values to assess and identify near-duplicate or duplicate documents.

(19) INDIA
(54) Title of the invention : CRICKET BAT WITH DETACHABLE HANDLE OF VARYING LENGTH
(51) International classification :A63B59/08
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SHAMSHAD ALI
Address of Applicant :ASSISTANT PROFESSOR
UNIVERSITY POLYTECHNIC, ALIGARH MUSLIM
UNIVERSITY ALIGARH-202002, UTTAR PRADESH,INDIA.
2)SYED TARIQ MURTAZA
1)SHAMSHAD ALI
2)SYED TARIQ MURTAZA
(57) Abstract :
THE CRICKET BAT WITH DETACHABLE HANDLE OF VARYING LENGTH COMPRISES OF TWO PARTS OF THE
HANDLE. PART 1 REMAINS PERMANENTLY FIXED WITH THE BLADE OF THE CRICKET BAT. PART 2 MAY BE MORE
THAN ONE HAVING DIFFERENT LENGTHS AND CAN EITHER BE DETACHED OR ATTACHED WITH PART 1 AS PER
THE REQUIREMENT OF THE BATSMAN. IN THIS WAY, THIS INVENTION FACILITATES THE BATSMEN GLOBALLY
TO LIGHTEN THEIR KIT BAG IN TERMS OF WEIGHT & FINANCE.

(12) PATENT APPLICATION PUBLICATION (21) Application No.1452/MUM/2013 A
(19) INDIA
(54) Title of the invention : A FILTER DETECTION BASED AIR PURIFICATION SYSTEM
(51) International classification
:B01D47/06,
B01D53/18
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)CHIRAG SATISHCHANDRA MUTHA
Address of Applicant :B-1, 104, GAGANVIHAR SOCIETY,
MARKET YARD, PUNE 411 037, MAHARASHTRA, INDIA
1)CHIRAG SATISHCHANDRA MUTHA
(57) Abstract :
A filter detection based air purification system for indicating the status of the filters is disclosed that includes a microprocessor
configured to determine a status of a composite filter by monitoring a power consumption of the system and thereby comparing the
power consumption with predefined values and reference values to revel the performance status of the system. The filter detection
based air purification system operates in at least four modes of operation including a self check mode, a second calibration mode, a
third normal mode, and a reset mode of operation that are indicated by predefined indicators positioned on a control panel. The
indicators indicate to take appropriate actions to improve the system performance related to the conditions of the filters.

(19) INDIA
(54) Title of the invention : AUTOMATIC GEAR MOTOR
:F16H63/34,
F16H3/72
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)NEERAJ KUMAR DHARWAN
Address of Applicant :S/O. PREM NARAYAN DHARWAN
G-3, MATRUCHHAYA APPTS, SARWADHARM, B-SECTOR,
KOLAR ROAD, BHOPAL - 462042 Madhya Pradesh India
1)NEERAJ KUMAR DHARWAN
(57) Abstract :
The invention is related to the field of energy. An Automatic Gear Motor is a motor which will make use of Gravitational force to run
on its own, without using any external energy source/fuel like petrol/diesel or electricity/battery. Use of an AC-DC type electric motor
of 1/ 12 HP which works at 220 volts current and a generator of 1/2 KVA is also made with the Automatic Gear Motor, as accessories.
The invention is environment friendly and is a green energy source which causes no pollution.

(19) INDIA
(54) Title of the invention : NOVEL SPIROMETER WITH ENERGY HARVESTING MODULE
:A61B5/093,
A61B5/087
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MRS. MANISHA RAJESH MHETRE
Address of Applicant :PLOT NO. 22, RAJAS SOCIETY,
KATRAJ-KONDHVA ROAD, KATRAJ PUNE-411046
Maharashtra India
1)MRS. MANISHA RAJESH MHETRE
2)MR. HEMANT KESHAV ABHYANKAR
(57) Abstract :
The present invention provides a novel spirometer with energy harvesting module which comprises embodied in a casing a sensor, a
humidity sensor, a temperature sensor. All these sensors are connected to a microprocessor through interfaces, the said casing with an
opening to inhale or exhale air from lungs, a propeller attached to a shaft of a DC motor placed in the way of inhaled/exhaled air, the
said shaft of the propeller attached to an energy harvesting module along with a thermopile (19) as shown in Fig. (3) and Fig. (4)

(19) INDIA
(54) Title of the invention : AN ALTERNATIVE PROCESS TO MAKE TRANSACTION QUICK, TROUBLE-FREE AND
PROTECTED BY NEW APPROACH INSTEAD OF CASH TRANSCATION.
:H04L29/06,
G06Q40/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. PRAMODKUMAR KAMALAKAR TIWATNE
Address of Applicant :M-2 KUBERA BAHAR, 131/2
BANER-SUS LINK ROAD, PASHAN, PUNE 411021,
MAHARASHTRA, INDIA.
1)MR. PRAMODKUMAR KAMALAKAR TIWATNE
(57) Abstract :
This disclosure relates to an android based device models (Size as Mobile handset) will be on specially made for to do easy, safe &,
secured transaction instead of Net banking transfers or cash payments.

(19) INDIA
(54) Title of the invention : LOW-COST HAND-DRIVEN BAMBOO-CORED INCENSE-STICK MAKING MACHINE
:B30B11/04,
B30B15/30
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)IIT GANDHINAGAR
Address of Applicant :VGEC COMPLEX, NEW CG ROAD,
CHANDKHEDA, AHMEDABAD 382424 Gujarat India
1)KESHAV GIRIYAPNAVAR
(57) Abstract :
The present invention relates to a method and machine for preparing incense sticks. The steps of the method are feeding dough into a
cylindrical container (18); loading a plurality of sticks (26) associated with a hopper (23) that fall off through a slit (23a) of the hopper
(23) one by one onto the feeder platform (23b); moving a feeder (24) in a pre-determined direction and turning it to a point where the
lower portion of the feeder(24) is in connection with at least one stick; releasing the feeder (24) to push plurality of sticks (26) into a
nozzle hole (21b) that surpasses a die opening (20b) outside an extruder (19) while an appropriate gap is adjusted between nozzle (21)
and die (20) and coating of the dough on the sticks where a vertical component of a predetermined pressure assists in the coating and a
horizontal component of predetermined pressure pushes the sticks out of the die opening (20b). The machine for preparing incense
sticks using a hand-driven mechanism, comprises a toothed-rack (16) driven by a gear-train system having at least one gear, a
ratcheted hand-crank (6) coupled to at least one shaft , a hollow cylindrical container (18) that performs the function of feeding
appropriate amount of dough , an extruder (19), a nozzle (21) that performs the function of guiding at least one stick into a nozzle-hole
(21b) and a die (20) and a feeder assembly (27) that comprises of a bracket(27a) that slides along a hopper (23) according to length of
at least one stick, a feeder fastener (27b), a pivot (27c) and a feeder (24).

(12) PATENT APPLICATION PUBLICATION (21) Application No.2073/CHE/2014 A
(19) INDIA
(54) Title of the invention : A METHOD OF FIXING MAGNETS IN THE ROTOR OF AN EXTERNAL ROTOR BLDC CEILING
FAN MOTOR
(51) International classification :h02k
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)VERSA DRIVES PRIVATE LIMITED
Address of Applicant :351B/2A UZHAIPALAR STREET GN
MILLS PO COIMBATORE Tamil Nadu India
1)N RAVI
(57) Abstract :
Energy conservation is pervading every spere of applications in the world. Alternate technologies are being adopted to existing
applications to save energy. BLDC motor technology is one such technology which is being slowly and steadeily adopted into air
moving, pumping and compressor applications inplace of century old single phase induction motor. Worldover this technology is
being adopted for mundane ceiling fan application as well. Most of the ceiling fans accross the world are external rotor motors which
is a very convenient and cost effective topology for this application. When they are adopted into the new BLDC technology they
continue to be external rotor motors. Under such a situation the rotor will have to carry the permanent magnet on its surface. The state
of the art in achieving this objective are 1) glueing a costly multipole rare earth ring magnet on to the rotor core, in which case motor
will be costly. (Casting large ring magnets to the diameter of ceiling fan requirement, using cermaic magnets is not possible). 2)
gluing a number of low cost sintered ceramic segment magnets on to the rotor core to form a multipole rotor, which is process
intensive and requires long time for curing after gluing 3) use plastic fixture as a positive support for inserting or sliding magnets into
the rotor core, in which case the magnet has to be of a specific shape, which might have to be a compromise on the resulting
performance of the fan 4) In Versa Drives Pvt Ltd, both rotor core, in the form of segmented strips, and magnets are glued to the rotor
body or bottom cover. This method has been reported in our earlier patent application no 3505/CHE/2012. This method, though less in
material usage is highly process intensive and costly, thus reducing the productivity considerably. The performance of the fan is
dependent on the accuracy and quality of gluing. The air gap consistency depends on this. More over it requires a special purpose
machine to glue the segments and magnets. An improved method of rotor production, which will reduce process time, process cost,
considerably, with out compromising on the total cost and performance of the end application is welcome. The proposed invention is
one such method which meets the above requirements.

(19) INDIA
(54) Title of the invention : A SYSTEM AND METHOD TO CONTROL ACCESS TO THE DEVICES CONNECTED VIA M2M
GATEWAY
(51) International classification :h04n
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Limited
Address of Applicant :HCL Technologies Ltd. 50-53 Greams
Road, Chennai 600006, Tamil Nadu, India
1)Tammana Uma Sankar
2)Shivani Tomar
3)Mayank Babu Rastogi
(57) Abstract :
Disclosed herein are a method and system for providing restricted access for User Equipments to various services and functions
associated with different End devices hosted by an M2M gateway. This access restriction mechanism provides means for restricting
access at service level as well as at function level. Further, access restrictions can be based on various parameters such as but not
limited to location, time, and user equipment.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHODS FOR CAPTURING AND ANALYZING DOCUMENTS TO IDENTIFY
IDEAS IN THE DOCUMENTS
(51) International classification :g06f
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
Address of Applicant :Doddakannelli, Sarjapur Road,
Bangalore 560035, Karnataka, India.
1)VINAY NARAYANA
2)SANTHOSH KUMAR MANIYAN
3)SARAYU KOSANAM
4)MANOJ MADHUSUDHANAN
5)RAMPRASAD KANAKATTE RAMANNA
(57) Abstract :
Systems and methods for capturing and analyzing documents to identify ideas in the documents are described herein. In one example,
the method for capturing and analyzing documents to identify ideas in the documents comprises pre-processing the documents to
remove noise, and extracting a theme associated with each of the documents, based on distribution of words and phrases in the
documents. The method further comprises performing labelling of the documents by assigning a topic to each of the documents, based
on pre-defined labelling rules and theme of the documents; and clustering the labelled documents into a plurality of groups based on
similarity of the topics assigned to each of the documents.

(19) INDIA
(54) Title of the invention : DEVELOPMENT OF NON INVASIVE EEG TECHNIQUE IN ANIMAL MODEL
(51) International classification :a61b
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)sindgi vasudeva murthy
Address of Applicant :Jayamukhi College of Pharmacy. Place
and Address : Village : Muqdumpuram, Chennaraopet Mandal,
Narsampet, Warangal Dist AP. Andhra Pradesh India
1)Sindgi Vasudeva Murthy
(57) Abstract :
The invention relates to modeling and design of EEG leads to suit the rat and non rodent animals for detecting and recording complex
patterns of neural activity recorded occurring within fractions of a second after a stimulus or after drug administration. The device
comprises foam plastic material, and at the centre of the EEG lead a metal, usually a copper/ silver , a good conductor of the signals
generated in the brain. For monitoring the parameters such as various EEG bands viz. delta, theta, alpha, and beta bands. The change
in parameters in some disease and disorder of the central nervous system can be recorded when the newly developed EEG leads
connected to a processor. A digital EEG system converts the waveform into a series of numerical values. This process known as
Analogue-to-Digital conversion (ADC).The values can be stored in the computer memory, manipulated, and then redisplayed as
waveforms on a computer screen. The invention extends a method of non-invasive monitoring of rodent and non rodent animals and
this method specifically described.

(19) INDIA
(54) Title of the invention : SYSTEMS AND METHODS FOR GENERATING A SECURE LOCKING INTERFACE
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)MAHESHWARAN GOVINDARAJESWARAN
(57) Abstract :
Systems and methods for generating a secure locking interface on a touch-screen display of a computing device are disclosed. The
system comprises a processor, a memory communicatively coupled to the processor, wherein the memory stores processor-executable
instructions, which, on execution, cause the processor to perform operations comprising associating a first attribute and a second
attribute to at least one alphanumeric code upon receiving an authentication request for authenticating a user. The first attribute and
the second attribute include at least one of colors, shapes, special characters, and images. Further, the operations comprise rendering
an alphanumeric interface to the touch-screen display. The alphanumeric interface has the at least one alphanumeric code with the first
attribute and the second attribute associated. Further, the operations comprise rendering a keypad interface to the touch-screen display,
wherein the keypad interface has an input key for each of the first attribute and the second attribute.

(19) INDIA
(54) Title of the invention : A MULTI NOZZLE DEVICE FOR PRECISE PRESSURE CONTROL OF GASES AND FLUIDS
(51) International classification :b08b
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Dr.G.R.Bharath Sai Kumar
Address of Applicant :No.100, ™Prashanth™, 2nd Main,
Vinayakanagar, Tumkur 572 101, Karnataka, India.
1)Dr.G.R.Bharath Sai Kumar
(57) Abstract :
According to an aspect of the present invention, multi nozzle device comprises hollow inner cylinder and an outer cylinder. The
hollow inner cylinder may have multiple nozzles along the length of said inner cylinder. The hollow inner cylinder may be coupled to
a first pressure. The outer cylinder may be mounted over said inner cylinder such that internal diameter of said outer cylinder is in
push fit with external diameter of said inner cylinder. The push fit is chosen to minimize friction to enable the outer cylinder to take
place of the flapper. The outer cylinder is moved exposing the nozzles and the first pressure is reduced by a proportion related to
number of nozzles exposed. In one embodiment, multi nozzle device further comprise, an O ring to prevent leakage of pressure when
the inner cylinder and the outer cylinder are tight fit. In another embodiment, pressure is pneumatic pressure which may be coupled to
the hollow part of the inner cylinder such that pneumatic pressure is released through the nozzles when the outer cylinder is moved
exposing the nozzles.

(19) INDIA
(54) Title of the invention : APPARATUS FOR DEEP-SEA MICROBIAL CULTURE AND METHOD THEREOF
(51) International classification :c12m
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)NATIONAL INSTITUTE OF OCEAN TECHNOLOGY
Address of Applicant :NIOT Campus, Velachery-Tambaram
Main Road, Narayanpuram, Pallikarani, Chennai 600100, Tamil
Nadu, India
1)R. KIRUBAGARAN
2)K. THIRUPATHI
3)N. R. RAMESH
4)M. A. ATMANAND
(57) Abstract :
An apparatus for isolation and cultivation of deep-sea microorganism is disclosed. The apparatus (100) comprises at least one reactor
vessel (104, 106, 108, 110, 112) for isolation of microorganisms from deep-sea water samples by serial dilution; and at least one
fermenter vessel (116, 118) operatively connected to the at least one reactor vessel for receiving isolated microorganisms for
cultivation; wherein, the pressure of the at least one reactor vessel and the at least one fermenter vessel can be maintained at a range
between 1 bar to 350 bar by means of a pneumatic system (122, 130).

(19) INDIA
(54) Title of the invention : AN IMPROVISED ELECTRICAL TEST TERMINAL BLOCK.
(51) International classification :h02g
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Manchanahalli Venkatarama Sastry Sathyanarayana
Address of Applicant :No: 68, Sathyanarayana Layout, 3rd
Stage, 4th Block, Basaveswaranagar, Bangalore-560 079,
Karnataka, India.
1)Manchanahalli Venkatarama Sastry Sathyanarayana
(57) Abstract :
The present invention relates to an improvised test terminal block. In one embodiment, test terminal block comprises a top cover as a
upper portion, top cover acting as outer cover for test terminal block, a vertical and horizontal links, wherein vertical links used for
voltage terminal and horizontal links used for current terminal, a metal contacts includes formed contact and connection terminal,
wherein the metals contacts used as a current and voltage terminals, a screw 9 with insulated cap for fixing vertical links to potential
terminal, screw 8 for fixing horizontal links to the formed contact 4, a moulded base as a middle portion which receives metal
contacts, links (vertical and horizontal) through screw 8 and 9, wherein metal contacts and links are formed by sheet metal strips of
uniform size with smaller dimensions, a bottom cover as a lower portion, wherein top cover and bottom cover encloses middle
portion.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR AUTOMATING IDENTIFICATION AND DOWNLOAD OF WEB
ASSETS OR WEB ARTIFACTS
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)VINOD RAMACHANDRA PANICKER
(57) Abstract :
Disclosed herein are systems, methods, and non-transitory computer-readable media for automating identification and download of
one or more web assets residing in a cloud based infrastructure. The present disclosure discloses two phases. One is the training phase
and the other one is actual run time phase. In the training phase, the system is trained to identify and download the one or more web
assets by generating URLs on its own. The one or more web assets may be an image, document, file containing source code. In the
actual run time phase, when the one or more web assets has migrated from one machine to another machine in the cloud, the one or
more web assets are re referenced. The system is intelligent enough to detect this re referencing and retrieving the one or web assets.

(19) INDIA
(54) Title of the invention : ORGANIC/ AMINO ACID MINERAL COMPOUND/ COMPLEXES
(51) International classification :a61k47/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)vardhishna
Address of Applicant :12-2-823/B/9, Income tax
colony,mehdipatnam, Hyderabad Andhra Pradesh India
1)vardhishna
(57) Abstract :
One or more salts bonded to the central metal covalently or coordinate covalently with an amino acid or salts of organic acids form a
mineral compound. Such compounds may contain at least one salt and one amino acid or one amino acid and two salts or two salts/
organic acids or two amino acids. Such amino acids or the salts of the organic acids or derivative thereof, so attached might either be
of the same kind or differ from each other. Such combinations are textured to produce value addition in a cell, being solubility or
absorbability or bio availability.

(19) INDIA
(54) Title of the invention : BUILDING SCALABLE HIERARCHICAL MULTI-TENANT APPLICATIONS
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Ltd
Address of Applicant :HCL Technologies Ltd AMB 3.64-
66,South Phase, II Main road, Ambattur Industrial estate,
Chennai-58 Tamil Nadu India
1)RAJESH VENKATESAN
2)MADHAVAVENKATEH RAGHAVAN
3)SEZHIYAN NAVARASU
(57) Abstract :
Building scalable hierarchical multi-tenant applications. This invention relates to scalable, hierarchical multi-tenant applications and
more particularly to abstraction of data and logic partitioning, hierarchical configuration and administration to enable developers to
build scalable hierarchical multi-tenant applications. The principal object of this invention is to propose a method and system to enable
an application to be constructed, wherein the application may support hierarchical multi-tenancy along with vertical and horizontal
partitioning capabilities. Another object of the invention is to enable an application to be constructed, wherein the complexity of the
application is abstracted as much as possible to the developers who develop the application.

(19) INDIA
(54) Title of the invention : IMPROVISED TABLE TOP GRINDER
(51) International classification :a47j
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Sriram Deepalakshmi & Balasundaram Sriram
Address of Applicant :Old No: 57, New No: 129, Barathi
Colony, Peelamedu, Coimbatore, Tamil Nadu, India
1)Sriram Deepalakshmi & Balasundaram Sriram
(57) Abstract :
AN IMPROVISED TABLE TOP GRINDER, comprising of a Drive Assembly and a Driven Assembly. Drive Assembly comprises of
Motor (04) and Pulley (05). Motor Fan sucks air into the Body Shell (03). Driven Assembly or Roller Assembly is within a Drum
(10), which accommodates Main Shaft (09) and Rollers (14). Both the assemblies are fastened on to a Base Plate (06), which has a
outer Base Cover (08), ventilated for the exit of hot air. Main Shaft (09) connected to the Drum (10) passes through a Teflon Washer
(21), a Gun Metal Bush (20) and then a Oil Seal (19), before entering the Bottom bush (18) followed by Main shaft (09). A Ball
bearing (22) provided at the bottom avoids rotation of the Main shaft (09), to which a Coupler (12) and stud are connected. Provision
is there to fix an Atta Kneader (16) or a Coconut Grater (17).

(19) INDIA
(54) Title of the invention : REAL TIME ANALYTICS BASED SPORTS TRAINING CASE IN POINT CRICKET
(51) International classification :a63B
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Ltd.
Address of Applicant :HCL Technologies Ltd. 50-53 Greams
Road, Chennai 600006, Tamil Nadu, India
1)Arvind Kumar Maurya
(57) Abstract :
Real time analytics based sports training. This invention relates to enabling sportspersons to train for a particular sport and more
particularly to using real time analytics by a sportsperson to train for a particular sport. The principal object of this invention is to
propose a method and system for providing analysis of actions performed by a sportsperson in real time and providing feedback based
on the analysis.

(19) INDIA
(54) Title of the invention : A METHOD OF USING A SIMPLE SENTENCE BASED PRODUCT SERIALISATION, PRODUCT
IDENTIFICATION AND BRAND VERIFICATION SOLUTION SYSTEM
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)RAGHAVACHARI SRIVATCHAN
Address of Applicant :3, I FLOOR, KAILASH, OLD NO.39,
NEW 6, UNNAMALAI AMMAL STREET, T. NAGAR,
CHENNAI - 600 017 Tamil Nadu India
1)RAGHAVACHARI SRIVATCHAN
(57) Abstract :
A system providing user-friendly and trusted unit level product authentication, serialization, identification and brand verification using
commonly used words, sentences in any spoken and written plurality of languages that are easy to input by the customer. The
spoken/written sentences are embedded to a check word and together called as a marker. The check word serves as a cue for product
authentication. A plurality of algorithms involved in the authentication system are derived by a combination of plurality of table set,
rule set and mathematical, non-mathematical functions and computed iteratively for successive brand verification and product
authentication without the need for any specialized input mechanism.

(19) INDIA
(54) Title of the invention : APPARATUS AND METHOD FOR ESTIMATING SYMBOL TIMING OFFSET
(51) International classification :h04l
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)SHASHI KANT SINGH
(57) Abstract :
Systems and methods for estimating symbol timing offset in wireless communication networks are described herein. In one example,
the method comprises converting a received signal into digital samples and decoding symbols from the digital samples based on
estimation of symbol timing offsets (STO), cyclic prefix (CP) correlation peaks and CP correlation confidence levels. The method
further comprises decoding frames by processing the decoded symbols, and obtaining data from the decoded frames, wherein the data
is to be forwarded to applications of the communication unit.

(19) INDIA
(54) Title of the invention : A novel method of determining wear volume of common metals
(51) International classification :F16D
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Dr.A.Krishnamoorthy
Address of Applicant :1.Dept.of Mech & Prodn.Engg.
Sathyabama University Chennai-119 TN India India
2)Mr.S.Arasu
1)Mr.S.Arasu
(57) Abstract :
In view of the foregoing an embodiment herein provides a method for determining wear volume in an adhesive wear process of a
common metal wherein the method comprising of determining the wear coefficient based on load applied on one metal to another
and using the determined wear coefficient in Archard wear 5 equation. The wear coefficient of a common metal is determined based
on the equation Yn = (A x3 + B x2 + C x + D) x 10-5 wherein A B C D are constants. The value of constant A B C and D are
varied based on the metal to determine the wear coefficient. 10

(19) INDIA
(54) Title of the invention : WIRELESS DATA TRANSFER DEVICES OPERATED BY VISIBLE LIGHTS
(51) International classification :g06k
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. KRISHNA CHAITANYA PODURU
Address of Applicant :C/O M. SRINIVAS, 402 UDAYA
SHINE APARTMENTS, BESIDE LANE OF SHAH
ELECTRONICS, STREET NO: 2, VANI NAGAR,
MALKAJGIRI, HYDERABAD - 500 047 Andhra Pradesh India
2)MR. PODURU VENKATA SATYA PRASAD
1)MR. KRISHNA CHAITANYA PODURU
2)MR. PODURU VENKATA SATYA PRASAD
(57) Abstract :
Recent developments in solid state light emitting diodes and many other fast switching light emitting sources led to new phase of
communication methodology and technology. In the light of tremendous efficiency showcased by these fast switching light sources,
the present invention describes new method of wireless visible light communication and device implementing the same. The present
device because of the noise cancellation technique employed can achieve higher SNR when compared to present day visible light
communication techniques.

(19) INDIA
(54) Title of the invention : A SECURE DOCUMENT HOLDER
(51) International classification :b42f
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Vineet Kumar
Address of Applicant :No: 2D, May Flower West Mount
Apartment, Thadagam Road, Coimbatore-641 013, Tamil Nadu,
India
1)Vineet Kumar
(57) Abstract :
A SECURE DOCUMENT HOLDER, comprising of a thick paper board, which is folded into two equal halves (1) & (2). The First
half (1) of the board overlaps on Second half (2). A PVC or a PP sheet envelops the inside of Bottom Board (2). Longitudinal Top (3),
longitudinal Bottom (4) and right lateral extreme (6) facing the outer portion of folded document holder (1) is sealed across the border,
using special adhesives. Left lateral extreme (6) facing inner portion of the folded document holder is left open for insertion of
document. Since the other three borders are sealed and Upper Board (1) overlaps Bottom Board (2), document is safely and securely
placed, consequent to which there is no chance of a free fall of the document. Metallic Clips (7) are provided at the four edges of the
Holder/Folder, preventing any damage and also ensuring easy opening of the folder.

(19) INDIA
(54) Title of the invention : SYSTEM FOR PROPELLING A WATER-BORNE TRANSPORTATION MEANS
(51) International classification :b63h
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)RAMANATHAN Subramanian
Address of Applicant :165, SEKKALAI ROAD,
KARAIKUDI, SIVAGANGA DISTRICT, TAMIL NADU -
630001, India
2)SAGAYANATHAN Nelson Prathish
1)RAMANATHAN Subramanian
2)SAGAYANATHAN Nelson Prathish
(57) Abstract :
A system for propelling a water-borne transportation means is provided. The system (100) may include a first set of propeller blades
(202) having a first longitudinal axis (204) and a second set of propeller blades (206) having a second longitudinal axis (208). The first
set (202) may be configured to rotate about the first longitudinal axis (204) in a first direction (212). The second set (206) may be
configured to rotate about the second longitudinal axis (208) in a second direction (214). The first direction (212) and the second
direction (214) may be opposite to each other. Rotation of the first set of propeller blades (202) and the second set of propeller blades
(206) may lead to propelling of the transportation means in a third direction (102). The third direction (102) may be perpendicular to
the first longitudinal axis (204) and the second longitudinal axis (208).

(19) INDIA
(54) Title of the invention : A METHOD FOR PROVIDING REAL TIME GUIDANCE TO A USER AND A SYSTEM THEREOF
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)Rohit Madegowda
2)Puja Srivastava
3)Ramprasad Kanakatte Ramanna
4)Manoj Madhusudhanan
(57) Abstract :
The present subject matter relates to a method and a guidance system for providing real time guidance to a novice user by an expert.
The method comprises capturing images of a plurality of actions performed by the user and the expert based on which position and
motion data associated with the actions are identified. Further, the method maps the complex environment of the novice user and
position & motion data into corresponding digital representations to allow real time interaction between the novice user and the expert.
During interaction, the guidance system monitors the performance of the novice user and dynamically suggests a list of alternate
actions when the guidance system identifies a deviation in the actions performed by the novice user compared to the actions performed
by the expert. If no deviations are identified, the guidance system implements the plurality of actions of the task in the real physical
world.

(19) INDIA
(54) Title of the invention : A TIRE INFLATION SYSTEM TO MAINTAIN SET TYRE PRESSURE
(51) International classification :b60c
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Mr.S.AswinGanapathy
Address of Applicant :Vice correspondent Dr.J.C.Kumarappa
Matric Hr.Sec.School Ganapathy Nagar Thanjavur district
Peravurani-614804 Tamil Nadu India
2)Mr.S.Arasu
1)Mr.S.AswinGanapathy
2)Mr.S.Arasu
(57) Abstract :
The present invention provides a simple design of a tyre inflation system to maintain set inflation tyre pressure. The tyre inflation
system to maintain set tyre pressure for a two wheeler includes a battery, a compressor, a pressure relay switch, a rotary coupling, a
modified axle shaft, a TEE-joint, a deflation valve, a non returnable valve and a pressure display, wherein the battery charges by a part
of engine power with a rectifier; wherein the pressure relay switch gives a signal to the battery to supply power to the compressor
during a drop of an air pressure in the tyre; wherein the compressor supply compressed air through an air pipeline to the rotary
coupling; wherein an axle hole permits the entry of compressed air from the rotary coupling to the modified axle shaft; wherein a
surface hole allows the compressed air from the modified axle shaft to a bush bearing; wherein the bush bearing facilitates admittance
of compressed air to a valve cap mouth through a hose assembly.

(19) INDIA
(54) Title of the invention : A LEVERAGE ASSEMBLY FOR ENERGY GENERATION
(51) International classification :f04b
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Ramesh Rajagopal
Address of Applicant :of Old No 8-a, New No 13-A, 4th Cross
Street, Ormes Road, Chennai 600 010, Tamil Nadu India
1)Ramesh Rajagopal
2)Mariaselvam Bhoopathy
3)Roahan Ramesh
(57) Abstract :
The present invention relates to various aspects of leverage assembly for energy generation. According to one aspect, the leverage
assembly comprises at least one first order lever having an effort arm and a load arm, where at least one weighted body is fitted to the
extreme end of the effort arm and positioned in opposite to the end of the load arm. At least one mounting table has a fulcrum on its
top side and a slot to pass-through the lever load arm into it, where the table is mounted on a base plate for being reciprocally actuated
in back and forth movement. Power receiver assemblies are positioned adjacent to the mounting table to be in operative contact with
the end of the lever load arm at the time of lever oscillation. The first order lever is pivotably mounted onto the table through its
fulcrum in a frictionless manner in such a way that when the table is being reciprocated, the lever effort arm along with its weighted
body is oscillated on the fulcrum at a desired oscillating angle, which simultaneously generates a multiplied force, at the end of the
lever load arm, that is directed to operate the power receiver assemblies for energy generation. Thus, such leverage assembly generates
efficient energy with the oscillating first order lever arrangement in an easy, reliable and cost effective manner.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHODS OF ADAPTIVE SAMPLING FOR EMOTIONAL STATE
DETERMINATION
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)MAHESHWARAN GOVINDARAJESWARAN
2)ARUN JEYAPRASAD ARJUN JEYARANI
3)SUDIPTA GHOSH
(57) Abstract :
Systems and methods for determining the emotional state of a user are described herein. In one example, the method for determining
the emotional state of the user comprises receiving a feed from a sensor at a default sampling frequency, and analyzing the feed to
determine facial features of a user. The method further comprises computing an emotional quotient of the user based on the facial
features, determining a trigger to re-compute the sampling frequency the feed, based in part on the emotional quotient and computing
a new sampling frequency based in part on the trigger. Thereafter, the method comprises generating instructions for the sensor to
capture the feed at the new sampling frequency.

Published indian patent and design registration information june 20th 2014

Published indian patent and design registration information june 20th 2014

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Destaque

Destaque (20)

Semelhante a Published indian patent and design registration information june 20th 2014

Semelhante a Published indian patent and design registration information june 20th 2014 (18)

Mais de InvnTree IP Services Pvt. Ltd.

Mais de InvnTree IP Services Pvt. Ltd. (20)

Último

Último (20)

Published indian patent and design registration information june 20th 2014