1. DOAA MOHAMED SABER
Dubai.Municipality Approved Structure G+12 Engineer
Mobile: +971551054073
E-mail: eng_doaa2005@ymail.com
CAREER OBJECTIVE:
• Looking for a challenging job in Engineering and construction field that promote career
growth, I am eager and willing to learn new technologies that came with the job, I am
confident that my qualifications and working experience will allow me to become a real
asset for any organization I work with.
PERSONAL INFORMATION:
• Nationality: Egyptian
• Date of Birth: 22-11-1982
EDUCATION:
• Preparing Master of Geotechnical Engineering in Cairo University
• Diploma in Civil Engineering
Faculty of Engineering, Cairo University
Concentration: Photogrammetry and R.S
Graduation Year: 2008
Grade of Diploma: Very Good (89%)
• B.Sc. of Civil Engineering
Faculty of Engineering, Helwan University
Graduation year: 2005
Graduation Project: “Geotechnical and Foundation Engineering”
A. Detailed Research for Ground Grouted Anchors
B. Design of:
 Ground Garage
 Embankment
 Elevated Tank

2.  Multistory Building
LANGUAGES:
• Arabic :Mother tongue
• English: Very Good spoken and written
SOFTWARE SKILLS:
 Computer skills:
• Microsoft Windows
• Microsoft Office:
MCAS: Mastering Microsoft Office 2007 (From YAT Learning solution center)
• 3ds Max design 2012
 CAD Software:
• Mastering AutoCAD 2009:
Autodesk Official Training courseware (AOTC)
Including:
− Essentials of AutoCAD 2009
− Intermediate of AutoCAD 2009
− Creating and Presenting 3D Models
• AutoCAD 2006 (2D):
Certified from Cairo University Faculty of Engineering
• AutoCAD Civil 3D 2010
 Design Software:
• CSI Diploma (Certified from Kemet ACADemy)
• CSI COL
• SAP2000 (Certified from Cairo University Faculty of Engineering )
2

3. • DRCS 3.7 (Design of Reinforced Concrete Structure program)
• LPS (Survey Program)
• Microstation (Survey Program)
• GIS (Survey Program )
• Automap (Survey Program)
• Erdas Imagine (Survey Program)
 Geotechnical Software:
• Plaxis software:
1-Advanced course on computational geotechnics (2014 at Dubai AUD)
2- Plaxis 2d-AE and Plaxis 3d 2013.
It was organized by plaxis academy and the lecturers were:
Dr. Ronald B.J. Brinkgreve plaxis bv/ Delft university of technology /Australia.
Prof. Helmut F. Schweiger-Graz university of technology/ Australia.
- Comutational Geotechnics soil modelling. ( Dr.Yasser EL-Mossallamy)
- Plaxis v 8.2 (2 D) (Certified by plaxis company Dr.Yasser EL-Mossallamy)
- Plaxis V.10 (2D) (Certified by plaxis company Dr.Yasser EL-Mossallamy)
- Plaxis V.10 (3D) (Certified by plaxis company Dr.Yasser EL-Mossallamy)
• WALLAP (Retaining Wall Analysis Program)
• Slope (a geotechnical analysis program for slope stability analysis)
• 3D-SETTELMENT
• Log Plot 2005
• ANCHOR WALL
• GeoStudio 2007
• staad foundation
• Gint
• Spreadsheets development for many geotechnical calculations.
 Program Language:
• Visual C++2008
EXPERIENCE:
 Current:
3

4. Position:
-
Senior Structural Designer
Company: - Sustainable Architectures and Engineering Consultancy -Dubai–
UAE FROM Nov. 2016 –till now.
 Responsibilities:
 Good experience in design of all projects types for examples:
- Design 2 High building (G+5PARK.+13+TOP ROOF).
- Design 8 building between (G+2. &G+8).
- Design more than 20 villas.
 Using a range of design computer packages for designing projects and undertaking
complex and repetitive calculations like:
-ETABS 9.7.4 -SAFE V12. -SAP 15 -STAAD PRO.
-PROKON 2010
 Using a range of design computer packages for designing projects and undertaking
complex and repetitive calculations.
 Developing detailed designs.
 Reviewing all the drawing to be submitted for the municipality.
 Good ability to finish municipality transactions procedures and dealings.
 Supervising tendering procedures and putting together proposals.
 Managing, supervising and visiting contractors on site and advising on civil engineering
issues.
 Overseeing the work of junior staff or mentoring civil engineers throughout the charter
ship process.
 From Feb 2014– Nov 2015
Diaa-consult group
Structural design Engineer involved in the following projects:
 From May 2012 – feb 2014
A&A–Consultants
1-Electric power plant
 Senior geotechnical engineer in GIZA NORTH POWER PLANT-1500MW
COMBINED CYCLE POWER OROJECT, Owned by the Ministry of Electricity, Egypt
4

5. with cost of 1.500.000.000 L.E, Project Engineer: Power Generation Engineering and
Service Company (PGESCo), constructed by JV Orascom,
 Responsible for preparing factual reports, preparing geotechnical analysis and
recommendation reports, preparing method statement for demolishing obstructing
utilities and Diversion of Road,
 Geotechnical Design for intake structure and discharge structure, Design of sheet
pile wall and temporary shoring (Secant piles), Design of dewatering systems.
2-WASTE WATER PLANT
 Senior geotechnical engineer in Extension of Abu-RAWASH Waste Water Treatment
Plant owned by The Organization for the Execution of the Greater Cairo and
Alexandria Potable water and Wastewater projects (CAPWO), Project Engineer Arab
consulting Engineer (Moharram-Bakhoum), Main contractor Arab contractor,
 responsible for Reviewing of the referenced drawings related to the structure under
study,
 Planning of the site investigation program, preparing factual reports,
 preparing geotechnical analysis and recommendation reports, settlement analysis
for structures,
 Design of side supporting system for chosen structures and for distribution
chambers (secant piles, soldier piles, Diaphragm wall),
 design of grouting for soil stabilization, design of dewatering systems (deep wells,
well points, surface pumping),
 Design of open excavations for chosen structures.
 Geotechnical analysis and design of under-crossings and tunnels jacking and
receiving pits, orientation and coordination of structures, settlement analysis for
structures, proposing construction sequence for structures.
3-SHORING SYSTEM FOR OTHER PROJECTS
A- Traditional systems (piles, Purlin wall,…etc)
 Senior geotechnical engineer in Egyptian Finical Supervisory Authority project,
owned by Egyptian finical supervisory authority, Project engineer ECG, Main
contractor Misr Sons Development (Hassan Allam Sons ), system (the shoring
system consists of Piles with anchors).
B- Non-Traditional systems (Reinforced Earth Wall)
 Senior geotechnical engineer in Marina Down Town Project, owned by Marina down
5

6. Town, Project Engineer Marina down town, Main contactor EL Tensar international,
the project comprises the construction of ramps which are proposed to be
constructed using reinforced earth wall technique.
 From March 2011 – May 2012
EGEC-Engineering house of experience.
As part time geotechnical engineer and my experience can be briefly exampled (for
many projects):
 Site investigation and foundations recommendation
 Design of Dewatering systems
 Design of shoring systems
 Design of soil improvement Vibro-replacement (Stone columns)
 Design of under crossing for utilities diversion using pipe jacking techniques
Perform an excavation/backfill construction sequences and recommendations
 From March 2010 – October 2010
A&A–E.Construct Engineers and Consultants
 From July 2007 – July 2009
National Authority for Remote Sensing and Space Sciences
(Surveying Engineer)
 From August 2005 – July 2007
RBC Office of Engineering Consultant
(Geotechnical Engineer)
Note: Testimonials and references will be provided on request.
6

7. Town, Project Engineer Marina down town, Main contactor EL Tensar international,
the project comprises the construction of ramps which are proposed to be
constructed using reinforced earth wall technique.
 From March 2011 – May 2012
EGEC-Engineering house of experience.
As part time geotechnical engineer and my experience can be briefly exampled (for
many projects):
 Site investigation and foundations recommendation
 Design of Dewatering systems
 Design of shoring systems
 Design of soil improvement Vibro-replacement (Stone columns)
 Design of under crossing for utilities diversion using pipe jacking techniques
Perform an excavation/backfill construction sequences and recommendations
 From March 2010 – October 2010
A&A–E.Construct Engineers and Consultants
 From July 2007 – July 2009
National Authority for Remote Sensing and Space Sciences
(Surveying Engineer)
 From August 2005 – July 2007
RBC Office of Engineering Consultant
(Geotechnical Engineer)
Note: Testimonials and references will be provided on request.
6