Fire_watch_training

FIRE WATCH MAN TRAININGFIRE WATCH MAN TRAINING
Azmeel HSE Department
JIC of Cooling PlantJIC of Cooling Plant
Dawood Akbar
(098-C58)

Saudi Kayan Petrochemical Complex ProjectSaudi Kayan Petrochemical Complex Project
2
Fire Watch Man TrainingFire Watch Man Training
BASIC FIRE SAFETY:BASIC FIRE SAFETY:
PREVENTION,PREVENTION,
PREPAREDNESSPREPAREDNESS
&&
CONTROLCONTROL

3
 Conduct pre-job inspection
 Ensure no presence of flammable / combustible materials
 Ensure that flammable gas test is conducted (where applicable)
 Ensure covering of ground holes, drains, sewers, cracks in the immediate
vicinity
 Watch for fires in all exposed areas
 Know emergency contact numbers / location of communication stations /
telephones
 Extinguish manageable fires
 Sound the alarm, if necessary, to alert affected personnel
 Summon external assistance i.e. fire service (998)
 Stop work if deemed necessary
 Wet or flush the ground with water
 Be aware of prevailing wind direction
 Know the nearest Safe Assembly Points & possible alternate routes
 Guide the group to safe assembly points during evacuation
Fire Watch Duties & ResponsibilitiesFire Watch Duties & Responsibilities

4
 When is fire watch required? When hot work is conducted in areas where :
 Flammable gas or vapor maybe present
 Fire might be developed from combustible materials / gases
 Special condition warrants
 Person authorized as fire watch
 A person nominated by his Supervisor who has received basic Fire
Watch / Fire Extinguisher Training and has adequate exposure in hot
work operations.
 Primary role of a fire watch
 To prevention / control fire
Fire Watch RequirementFire Watch Requirement

5
 Distribution of Fire Extinguishers:
 Visible from all directions
 Easily accessible (within immediate reach)
 Near normal path or travel (entrance / exit ways)
 Installed on an 'area-by-area' or 'floor-by-floor' basis
 Free from sight and travel obstruction
 Within 15.25 m (50 ft) max. travel distance (Class B Hazards)
 Within 22.7 m (75 ft) max. travel distance (Class A Hazards)
 Reasonably away from immediate source of fire (e.g. stationary
machine, flammable storage, etc.)
 One 20 lbs. unit (minimum) for each mobile equipment
 One 20 lbs. unit (minimum) for every hot work group
Basic Fire Safety Cont’dBasic Fire Safety Cont’d

6
 Inspection of Fire
Extinguishers
 Accessibility / visibility
 Inspection tag / coding
 Plastic seal
 Lock pin
 Gauge (stored pressure)
 CO2 Cartridge (cartridge type)
 Weight (CO2 type)
 Nozzle
 Shell, bottom
 Label
 General condition

7
COMMONCOMMON
FIRE HAZARDS /FIRE HAZARDS /
CAUSES OFCAUSES OF
FIREFIRE

8
oxygen
ignition
fuel
chemicalreaction
 What is fire?
A fire is a chemical
reaction that involves 3
elements: fuel, oxygen
and heat (source of
ignition)
BASIC FIRE SAFETYBASIC FIRE SAFETY

9
 Fuel - Any combustible material: solid, liquid or gas.
 Oxygen - The air we breathe is about 21 percent oxygen.
Fire only needs an atmosphere with at least
16 percent oxygen.
 Heat - Heat is the energy necessary to increase the
temperature of the fuel to a point where sufficient
vapors are given off for ignition to occur.
 Chemical Reaction - A chain reaction can occur when the other
three elements are present in the proper
conditions and proportions.
 How do fires start? (Elements of Fire)

10
Common Fire Hazards….Common Fire Hazards….
Hot Work / Open Flame Operation WithoutHot Work / Open Flame Operation Without
Spark ContainmentSpark Containment

11
Improper Storage of Flammable MaterialImproper Storage of Flammable Material
Flammable

12
Improper Handling of Flammable Material /Improper Handling of Flammable Material /
Careless SmokingCareless Smoking

13
Careless SmokingCareless Smoking

14
Unattended HeatersUnattended Heaters

15
Poor House KeepingPoor House Keeping

16
Improper FuelingImproper Fueling
Use Safety Can

17
Spontaneous CombustionSpontaneous Combustion
Greasy / Oily Rags

18
Overloaded OutletsOverloaded Outlets

19
Over Rated Fuse / Faulty ConnectionsOver Rated Fuse / Faulty Connections

20
NonNon--intrinsically Safe Equipmentintrinsically Safe Equipment

21
HOW CANHOW CAN
FIRES BEFIRES BE
PREVENTEDPREVENTED

22
 Class A - Extinguish ordinary
combustibles by cooling the
material below its ignition
temperature and soaking the
fibers to prevent re-ignition.
Use pressurized water, foam or
multi-purpose dry chemical
extinguishers.
 How can fires be controlled / extinguished?How can fires be controlled / extinguished?
Class
Fires in any ordinary combustible
Materials i.e. trash, wood, paper, etc

23
 Preventive Measures
 Maintain good housekeeping
 Place oily / greasy rags in covered
containers (potential source of
spontaneous combustion)
 Keep open flame operations isolated
/ controlled (35 Ft clear radius min.)
 100 % spark containment (use of fire
blanket or non combustible barrier for hot
work)
Class
Fires in any ordinary combustible
Materials i.e. trash, wood, paper, etc
 How can fires be Prevented ?How can fires be Prevented ?

24
Class
Flammable liquids or gases
 Class B - Extinguish flammable
liquids, greases, or gases by removing
the oxygen, preventing the vapors from
reaching the ignition source. Foam,
carbon dioxide, ordinary dry chemical
and halon extinguishers may be used to
fight Class B fires.
Follow MSDS.

25
Class
 Control Measures:
 Don't refuel gasoline - powered
equipment while it's engine
running or still hot.
 Keep flammable liquids stored in
tightly closed, self-closing, spill-
proof containers (safety can).
 Store flammable liquids away from
spark-producing sources.
 Use flammable liquids only in well-
ventilated areas.

26
Class
 Good storage practice:
 Protected / isolated / ventilated storage
area
 Use safety can for flammable liquids
Ventilation

27
Class
safety can
 Proper handling

28
Class
 Never allow open flame / source of
ignition near flammable liquids / gases
(35 Ft. clear radius min.)
 Restrict smoking

29
Class
Preventive Measures
 Understand MSDS

30
Class
Fires in “LIVE”
Electrical equipment
 Class C - Extinguish energized
electrical equipment by using an
extinguishing agent that is not
capable of conducting electrical
current. Carbon dioxide, ordinary
dry chemical, multipurpose dry
chemical and halon fire
extinguishers may be used to fight
Class C fires. DO NOT USE water
extinguishers on energized
electrical equipment.

31
Class
Fires in “LIVE”
 Look for old wiring, worn insulation, broken and
loose electrical fittings.
 Prevent motors from overheating by keeping
them clean and in good working order.
 Utility lights should always have some type of
wire guard over them. Heat from an uncovered
light bulb can easily ignite ordinary
combustibles.
 Never install a fuse rated higher than specified
for the circuit.
 Investigate any appliance or electrical
equipment that smells strange. Unusual odors
can be the first sign of electrical fire.
 Don't overload wall outlets. Two outlets should
have no more than two plugs.
 Good maintenance program of all electrical
appliances

32
Class
Fires in “LIVE”
 Control Measures:
 Look for old wiring, worn insulation and
broken electrical fittings.
 Prevent motors from overheating by keeping
them clean and in good working order.
 Utility lights should always have some type of
wire guard over then. Heat from an
uncovered light bulb can easily ignite
ordinary combustibles.
 Never install a fuse rated higher than
specified for the circuit.
 Investigate any appliance or electrical
equipment that smells strange. Unusual
odors can be the first sign of electrical fire.
 Don't overload wall outlets. Two outlets
should have no more than two plugs.

33
Class
D
 Class D - Extinguish
combustible metals such as
magnesium, titanium, potassium
and sodium with dry powder
extinguishing agents designated
for the material involved.

34
HOW CANHOW CAN
FIRE BEFIRE BE
CONTROLLEDCONTROLLED

35
What To Do In Case Of Fire ?What To Do In Case Of Fire ?
 First Rule – KEEP CALM!
 Remember how to R A C E during a fire
R – rescue personnel in immediate danger
A – alert others; yell out “fire, fire!” or activate fire
alarm
C – contain; close doors, windows (don’t lock)
E – extinguish / evacuate; extinguish manageable
fire, apply PASS method / evacuate the area.
If fire is beyond control, call Fire Dept.

36
Never Attempt To Fight A Fire If……Never Attempt To Fight A Fire If……
 Your instinct tells you not to do so
 You don’t know what is burning
 You suspect toxic fumes that you might inhale
 There is no sure “way out” behind you
 Your escape route is obstructed
 There is no fire extinguisher nearby
 The fire is beyond control

37
Stop - where you are
Drop - to the floor or ground
Roll - around on the floor or ground
STOP, DROP and ROLL …This will smother the flames,
possibly saving your life.
If a co-worker catches on fire, smother the flames by
grabbing a blanket or rug and wrapping him up in it. That
could save him from serious burns or even death.
 What to do if someone catches on fire?

38
 What to do if someone catches on fire?
1) First Rule…Keep calm, try not to panic.
2) Alert others, activate fire alarm
3) Shut doors & windows (but don’t lock).
4) If manageable, extinguish fire with hand held fire extinguisher. Apply ' PASS '
method :
5) Leave the area via nearest exit (never use elevator). If trapped in an enclosed
area or building:
 never open a closed door without feeling it first. If the door is hot, try another exit.
 get to your hands and knees and crawl. The possibility of inhaling smoke is less near
the floor.
 Make use of any available shield such as blankets or tarps - these will help you get out
of the area with less risk of injury. Wet handkerchief or clothes over your nose will
also help cut down the smoke intake.
 Proceed to pre-designated safe assembly area

39
 How To Use Portable Fire Extinguisher?
APP. 3 Meters
( 10 feet )
Wind
P - pull the pin or puncture cartridge
A - aim at base of flame
S - squeeze the trigger
S - sweep from side to side

40
Mode of Extinguishing Action
(Multipurpose Dry Chemical Fire Extinguisher)
Burning Material
Caution:
 Watch for reflash / reignition from deep seated fires
 Extinguishing agent cannot penetrate below burning
surface

41

Fire_watch_training

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Destaque

Destaque (20)

Semelhante a Fire_watch_training

Semelhante a Fire_watch_training (20)

Mais de Azmeel Contracting Company

Mais de Azmeel Contracting Company (20)

Último

Último (20)

Fire_watch_training