Watch digital pictures using atsc tuner with serial port and remote
1. Watch digital pictures using ATSC Tuner with serial port and remote
Backdrop Info:
Rapid growth in the field of Information and Communication Technology (ICT) demands digitization of all
fields that use signaling and communication. All analog systems are replaced to work on digital logics
and technology systems. Television (TV) is also one of the core technology areas where migration to
digital transmission happened over terrestrial and cable networks. A standard developed early in 1990 in
USA for the digital TV version is Advanced Television Systems Committee (ATSC). Tuners designed to
receive the Digital transmission on ATSC format are called ATSC tuners and by law it was made
mandatory from March 1st of 2007, in US to provide ATSC tuners in all the consumer electronic devices
like TVs, VCRs, DVD and Blu-ray players and this is due the television stations ceased the analog (NTSC)
transmission from 12th June of 2009.
Migration to digital:
There was a question, whether one should throw away the analog TV and go for HD TV or a digital TV
system. Here comes the ATSC+SDI (Serial Data Interface) tuner to save your analog TV intact and
migrate to receive digital signals in the analog TV with the ATSC+SDI performing the conversion of the
analog signal into digital signals. Viewers can watch shows with the same old picture quality...
Features of ATSC+SDI
This tuners has a built in HD-SDI output that no separate adapters are required for watching digital
transmission in a TV set.
·
Warranty: 2 years
·
IR and RS232 (serial data link) can control the unit.
·
Front Panel display supports to perform setup and maintenance functions.
2. ·
Firm update is possible through the front panel USB (Universal Serial Bus IF)
·
Capable of receiving both analog and digital channels in ATSC, NTSC and QAM formats.
·
Front-panel text and onscreen menus for tuner setup
·
Web page for remote setup and control
·
Analog and digital closed captioning
·
Supports dual Air/Cable tuning with optional RF switch
·
RS-232 can be daisy-chained to control up to 9 tuners from a single RS-232 port, or control any
number of tuners via IP
·
Always-active HD-SDI, Component, and composite video, as well as stereo, and digital coax and TO
Slink optical audio ports Dolby 5.1 or PCM/Variable PCM digital audio formats for digital audio ports and
HD-SDI AES/AC3
·
Rack-mountable in 1RU, two across
·
Display for all channels at selected resolution
·
Meets RoHS and California energy-saving standards
·
Includes HD2-RC IR remote and 12 VDC power supply
Specifications in Brief:
Type:
Universal NTSC, digital ATSC and QAM tuner with HD-SDI output
Size:
8.5” (w) x 1.75” (h) x 8” (d)
Tuning:
Analog and Digital set by program.
Front Panel: Contains all items displayed in the picture
HD output:
At fixed resolutions 1080i/720p/480i
AV Out:
Simultaneous with HD output
Control:
Ethernet RJ-45 @ 10/100; RS 232: DB Male, RS-232 data link
Air/Cable:
3.5mm output to operate the RF-AB RF A-B Switch
Power:
2.1mm Co-axial jack; 1A max; 11 to 14 VDC typical
Includes:
HD2-RC IR remote (1.5A 12 VDC, option for 4A PS for 3 units.
For further details connect to the link: http://www.contemporaryace.com/ATSC+SDI/product