This document discusses key properties of EVA film glass laminating machines, including:
- Machines can have one or multiple laminating beds depending on needs.
- Heating pipes should have sufficient power like 2400W to laminate glass efficiently without bubbles.
- Fan-well-proportioned heating helps maintain even interior temperatures.
- Silicon bags must seal properly during lamination and vacuuming pumps must effectively remove bubbles.
- Temperature detectors are typically placed on bag surfaces rather than inside to accurately measure heat.
- Some machines can laminate both EVA and PVB films.
4. Properties of EVA Film Glass Laminating
Machine
• How many beds (layers) inside the machine?
• Some glass laminating machine manufacturer produces
machine with only one bed. But some manufacture the
machine with two or more laminating beds. You can choose
the kind that is suitable for you.
6. Properties of EVA Film Glass Laminating
Machine
• The heating pipe
• Where is the heating pipe and how much power of the
heating pipe? The power of the heating pipe usually is 2400 w.
If the power of the heating pipe is too low, than it would
takes long time to produce the laminated glass, and the
producing efficiency is low. If the power of the heating pipe is
too high, it’s easy to cause the bubbles of the laminating glass.
8. Properties of EVA Film Glass Laminating
Machine
• Is the fan-well-proportioned heating?
• This is very important. If the glass laminating machine is the
fan-well-proportioned heating, the temperature of inside the
oven is average, which is best for glass laminating.
9. Properties of EVA Film Glass Laminating
Machine
• Silicon bag
• The place of the vacuuming hole of the silicon bag and how is
the silicon bag be sealed when laminating.
10. Properties of EVA Film Glass Laminating
Machine
• Vacuuming Pump
• This part mainly effect whether the bubbles come inside
laminating glass. It is separated in to the water-cooled and oil-
cooled. Please pay attention to whether the vacuuming ability
is high enough.
11. Properties of EVA Film Glass Laminating
Machine
• The temperature detector
• Where is the detector putted? On the surface of the silicon
bag or inside the silicon bag? Usually it is on the surface of the
silicon bag. The place the detector is putted may cause the
difference between the temperature you read and the real
temperature of the laminated glass.
12. Properties of EVA Film Glass Laminating
Machine
• Laminating the EVA FILM and PVB FILM at the same machine
• Some China glass laminating manufacturer has invented a
machine which can laminated with EVA FILM and PVB FILM.
13. Properties of EVA Film Glass Laminating
Machine
All rights reserved by
CNC GLASS INTERLAYER TECH WWW.CNCGLASS.COM
CNC@CNCGLASS.COM BENEXT77@GMAIL.COM
008615013829504 Skype: CNEXT365 Wechat: WECAN365 Line: CNCGLASS
EVA film for laminated glass, PVB film, PDLC smart galss film, Glass hardware,