2. CIC Crane Operator Certifications
Written & Practical Exam Dates
Crane Institute of America is a CIC-approved test site that
administers written and practical exams for mobile crane
operators at our Orlando facility on the following dates:
Jan.-June 2010 July-Dec. 2010
Written Practical Written Practical
January 8 January 9 July 15 July 16
January 14 January 15 August 5 August 6
February 4 February 5 September 17 September 18
March 5 March 6 September 23 September 24
CIC Crane Operator and March 11 March 12 October 8 October 9
April 16 April 17 October 14 October 15
Rigger/Signalperson April 22 April 23 November 5 November 6
Certifications are Accredited May 7 May 8 November 11 November 12
May 13 May 14 December 3 December 4
by NCCA! June 11 June 12 December 9 December 10
June 17 June 18
Become a Nationally Accredited To register for CIC Crane Operator
CIC Certified Crane Operator Certification Exams, go online to www.CICcert.com
or call (763) 476-4242
CIC operator certifications meet state and federal OSHA
requirements and will meet the proposed OSHA regulation
mandating accredited crane operator certification. Operator Become an Authorized
certification is offered on the following types of mobile cranes: CIC Practical Examiner for
• Telescoping Boom up Mobile Cranes
to 21 ton To be authorized as a
• Telescoping Boom 21 CIC Mobile Crane
to 75 ton Practical Examiner, the
• Telescoping Boom over examiner-candidate
75 ton must participate in a
• Lattice Boom Carrier CIC Practical Examiner
Mounted training session. CIC is
• Lattice Boom Crawler offering Practical
Mounted Examiner training on:
Advantages of CIC Certifications 2010 Practical Examiner Training Dates
• Fewer written exams Orlando, FL Jan. 5-7 Orlando, FL July 13-15
Orlando, FL Feb. 9-11 Orlando, FL Aug. 10-12
• One practical exam for up to (5) certifications Orlando, FL March 9-11 Orlando, FL Sept. 14-16
• Less expensive Orlando, FL April 13-15 Orlando, FL Oct. 12-14
• Online or written exams Orlando, FL May 4-6 Orlando, FL Dec. 14-16
• Calculators allowed during exams Orlando, FL June 8-10
• Test questions relevant to the job
Operator Re-Certification CIC prep training and written and practical exams can
also be administered on-site at your facility (see pages
Re-certification is available to operators currently certificated 6 & 7). For more information call (800) 832-2726.
through an accredited program. For your convenience written or
online re-certification exams are available at multiple locations in
virtually every community nationwide.
2 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
3. CIC Rigger/Signalperson Certifications
Become a Nationally Accredited To register for CIC Rigger/Signalperson
Exams, go online to www.CICcert.com or call
CIC Certified Rigger/Signalperson (763) 476-4242
CIC rigger/signalperson certifications meet
state and federal OSHA requirements and will
meet the proposed OSHA regulation Introductory
Price
mandating accredited basic
rigger/signalperson. $99
Advantages of CIC Certifications
• Fewer written exams
• One practical exam for
two certifications
• Less expensive
• Online or written exams
• Test questions relevant to
the job
Written & Practical Exam Dates CIC prep training and written and practical exams can
Crane Institute of America is a CIC-approved test site that adminis- also be administered on-site at your facility (see page
ters written and practical exams for rigger/signalpersons at our 12). For more information call (800) 832-2726.
Orlando facility.
Training: CIC Certification:
2010 Basic Rigger/Signalperson (800) 832-2726 (763) 476-4242
Exam Dates www.craneinstitute.com www.CICcert.com
July 20
January 26
February 23 August 24 Coming Soon!
March 23 September 14
April 20 October 19
Advanced Rigger and Lift Director accredited certifications are
May 18 November 16 currently being developed and will be available in 2010.
June 22 December 14
Become a CIC Test Site
CIA’s testing center. CIC operator and rigger/signalperson practical exams are quick
and easy to set-up while providing a complete and valid measure-
ment of the operator’s and signalperson’s practical skill.
For more information call (763) 476-4242
or go online to www.CICcert.com.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 3
4. The Standard in Training Programs
MOBILE CRANES • BOOM TRUCKS • OVERHEAD CRANES • GANTRY CRANES & HOISTS
MARINE/OFFSHORE CRANES • PEDESTAL CRANES • RIGGING
AERIAL LIFTS • FORKLIFTS • TRAIN-THE-TRAINER
Hands-On Training in Orlando Training at Locations Near You
At Crane Institute’s 5-acre facility near Orlando, Florida, our Conscientious employers are taking advantage of Crane Institute’s
instructor’s conduct hands-on training on mobile cranes, industrial powerful, time-proven training programs. Our nationally scheduled
cranes, boom trucks and rigging equipment. Our hands-on pro- open-enrollment programs are ideal for individuals as well as
grams are excellent for trainees or as a refresher for experienced corporate or government entities desiring training for specific
personnel. We cover all the bases, from pre-op inspection to setup personnel. Programs are conveniently scheduled at 33 locations
to operation to shutdown. throughout the U.S. For dates, see pages 5-16!
Our building block approach to training is unlike any available
today. Students move from the classroom to the crane On Site at Your Facility
simulator to actual operation of equipment, acquiring the
practical skills they’ll need on the job. This “building-block” All of our training programs can be brought directly to your job
technique enables students to learn the skills much quicker than site. Each training program is customized to your company’s
through other methods of training, and with proven results. specific lifting and rigging equipment requirements. Instructors
can conduct hands-on training with your equipment at your job
site. Call (800) 832-2726 for a cost proposal.
Training Benefits
• Reduce accident potential FREE! Crane Institute of America
• Reduce liability exposure Video DVD with purchase of an on-site
• Reduce insurance rates
training program!
• Boost worker morale
• Create an attitude of safety
• Comply with OSHA and Industry standards
4 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
5. Managing Crane Safety
CERTIFICATE OF TRAINING A fast paced program loaded with exercises and workshops designed to
A Certificate of Training suitable for framing is awarded to each enable you to improve crane safety and management back on the job.
participant upon successful completion of training program.
You will learn solid, factual and usable information that will enable you to
comply with OSHA and Industry standards, prevent accidents, limit your
liability exposure and provide maximum job site safety. You will also
receive hands-on instruction on our mobile crane simulator at Orlando
programs.
2 Days $595
CRANES AND RIGGING COVERED
• Telescoping Boom Cranes
• Lattice Boom Cranes
• Boom Trucks
• Industrial Cranes
• Construction and Industrial Rigging
TOPICS COVERED
• Management’s role in hazard awareness, elimination & mitigation.
• Why Cranes present such potential for accidents.
• How to reduce your liability exposure.
• Understanding how cranes have changed.
• How to interpret load charts.
• Selecting operational aids.
• Inspection requirements and record keeping.
• How to set-up a crane inspection program.
• New ASME document on owner, user, supervisor, lift director, and
operator responsibilities.
• How to train and certify your crane operators.
2010 Schedule • Applying OSHA and ASME standards to your workplace.
• Where we stand on OSHA’s new operator certification requirement.
Houston, TX Jan. 12-13 Salt Lake City, UT July 13-14 • Hoisting personnel with cranes.
Pittsburgh, PA Feb. 2-3 Nashville, TN Aug. 3-4 • The most common unsafe crane and rigging practices.
Chicago, IL March 9-10 Orlando, FL Sept. 20-21
• Rigging equipment and procedures.
Orlando, FL March 15-16 Dallas, TX Sept. 21-22
• How to plan a critical lift.
Birmingham, AL April 13-14 Baton Rouge, LA Oct. 19-20
New York City, NY May 11-12 Orlando, FL Nov. 1-2
Milwaukee, WI June 15-16 Charlotte, NC Nov. 9-10 YOU WILL RECEIVE
Orlando, FL June 21-22 Newark, NJ Dec. 14-15
• Managing Crane Safety workbook
• Mobile Cranes handbook
• Rigging handbook
• Crane safety reference card
22
• Rigging safety reference card
• Safety decal
• Hoisting personnel safety reference card
• Applicable OSHA and ASME standards
Years of • Pre-operational inspection checklists
Excellence • Annual inspection checklists, load
chart worksheets, critical lift plan,
hoisting personnel plan, and
much more!
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 5
6. Mobile Crane Operator
TELESCOPING & LATTICE BOOM CRANES • BOOM TRUCKS • INDUSTRIAL CRANES
A safety program ideal for operators, supervisors
and other personnel who require a thorough Excellent preparation for taking CIC
knowledge of mobile crane operation and safety. certification exams and becoming a nationally
accredited certified Mobile Crane Operator!
3 Days $895
Free Operator Qualification Certificate!
YOU WILL LEARN
• Causes & results of mobile crane accidents.
• Types, components & terminology of mobile cranes.
• How mobile cranes are rated.
• How to interpret and use load charts.
• Pre-lift considerations.
• Set-up and site considerations.
• Safe operating practices and procedures.
• ASME B30.5 - operator, rigger, and supervisory responsibilities.
• How to perform pre-operational inspections.
• How to conduct pick & carry operations safely.
• How to prepare for a critical lift.
• Procedures for boom/jib assembly/disassembly.
• Correct hand signals & responsibility of signalpersons.
• Procedures for safely working cranes near power lines.
• How to comply with OSHA when hoisting personnel with mobile cranes.
• Basic rigging procedures: wire rope, slings, hardware, lifting devices, etc.
Simulator Training Included
with all Orlando Classes
2010 Schedule YOU WILL RECEIVE
Anchorage, AK Jan. 5-7 Guam June 7-9 • Mobile Crane Safety workbook
Orlando, FL Jan. 11-13 San Antonio, TX June 8-10
• Mobile Cranes handbook
Las Vegas, NV Jan. 12-14 Orlando, FL June 14-16
Denver, CO Jan. 19-21 Orlando, FL July 12-14
• Rigging handbook
Pittsburgh, PA Jan. 26-28 Baltimore, MD July 13-15 • Rigger's capacity card
Orlando, FL Feb. 1-3 Savannah, GA July 20-22 • Hand signal card
Seattle, WA Feb. 2-4 Kansas City, KS July 27-29 • Safety decals
Minneapolis, MN Feb. 9-11 Charlotte, NC July 27-29
• Certificate of training
Houston, TX Feb. 16-18 Orlando, FL Aug. 2-4
Nashville, TN Feb. 23-25 Milwaukee, WI Aug. 10-12 • Operator qualification card, if applicable
Chicago IL March 2-4 Philadelphia, PA Aug. 31-Sept. 2
Orlando, FL March 8-10 Houston, TX Aug. 31-Sept. 2
Charleston, WV March 9-11 Nashville, TN Sept. 14-16
St. Louis, MO March 16-18 Orlando, FL Sept. 20-22
Phoenix, AZ March 23-25 Columbus, OH Sept. 21-23
Sacramento, CA April 6-8 Portland, OR Sept. 28-30
Albuquerque, NM April 13-15 Baton Rouge, LA Oct. 5-7
Orlando, FL April 19-21 Orlando, FL Oct. 11-13
Birmingham, AL April 20-22 Birmingham, AL Oct. 12-14
Salt Lake City, UT April 20-22 Orlando, FL Nov. 8-10 An operator qualification certificate is available to those operators who
Newark, NJ April 27-29 Atlanta, GA Nov. 16-18
Little Rock, AR May 4-6
meet the physical, written and experience requirements.
Buffalo, NY Nov. 30-Dec. 2
Orlando, FL May 10-12 Orlando, FL Dec. 6-8
Tulsa, OK May 11-13 Dallas, TX Dec. 7-9
Honolulu, HI May 25-27
6 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
7. Mobile Crane Operator, Hands-On
TELESCOPING & LATTICE BOOM CRANES • BOOM TRUCKS • INDUSTRIAL CRANES
STEP 1 Excellent preparation for taking CIC
certification exams and becoming a nationally
TECHNICAL accredited certified Mobile Crane Operator!
CLASSROOM
TRAINING
Classroom instruction in the
technical aspects of mobile
crane operation with Basic Program
4 Days $995
emphasis on safety, load
charts, setup and operating practices.
STEP 2 Free Operator Qualification Certificate!
CRANE 3 Days Classroom
SIMULATOR
TRAINING
1 Day Hands-On
You can begin to apply the Our basic 4-day program is an excellent introduction for beginners or
technical information learned occasional operators, and a perfect refresher for experienced operators.
in the classroom using our It’s also a great opportunity for supervisors, safety personnel and anyone
realistic crane simulator. else who wants to experience what it is like to operate a crane.
Learn the principals of actual crane operation in a safe
environment without the fear of having an accident. In addition to 3 days of classroom training, this program includes
1 day of intensive hands-on instruction covering the following areas:
STEP 3 • Causes & results of mobile crane accidents.
HANDS-ON • Types, components & terminology of mobile cranes.
TRAINING • How mobile cranes are rated.
After satisfactory completion • How to interpret and use load charts.
of both classroom and • Pre-lift considerations.
simulation training, get behind • Set-up and site considerations.
the controls of an actual • Safe operating practices and procedures.
crane. Develop and improve • ASME B30.5 - operator, rigger, and supervisory responsibilities.
your operating skills in the unique setting of our 5-acre • How to perform pre-operational
“hands-on” training site. inspections.
• How to conduct pick & carry
operations safely.
• How to prepare for a critical lift.
• Procedures for boom/jib
assembly/disassembly.
2010 Schedule • Correct hand signals &
responsibility of signalpersons.
Orlando, FL Jan. 4-7 Orlando, FL Sept. 13-16 • Procedures for safely working
Orlando, FL March 1-4 Orlando, FL Oct. 4-7 cranes near power lines.
Orlando, FL April 12-15 Orlando, FL Nov. 1-4 • How to comply with OSHA when
Orlando, FL May 3-6 Orlando, FL Nov. 29-Dec. 2 hoisting personnel with mobile
Orlando, FL June 7-10 cranes.
• Basic rigging procedures: wire
rope, slings, hardware, lifting
devices, etc.
An operator qualification certificate is available to those operators
who meet the physical, written and experience requirements.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 7
8. Boom Truck Operator, Hands-On
Classroom and hands-on instruction specifically Excellent preparation for taking CIC
designed to train personnel to safely operate a certification exams and becoming a nationally
boom truck. This program offers a qualification
certificate ensuring that beginners or experienced
accredited certified Boom Truck Operator!
personnel meet or exceed OSHA and ASME
requirements.
5 Days $1,295
HANDS-ON TRAINING Free Operator Qualification Certificate!
3 Days Classroom
2 Days Hands-On
YOU WILL LEARN
• Causes & results of crane accidents.
• Types, components & terminology of boom trucks.
• How boom trucks are rated.
• How to interpret and use load charts.
• Pre-lift considerations.
• Set-up and site considerations.
• Safe operating practices and procedures.
• ASME B30.5 - operator, rigger, and supervisory responsibilities.
• How to perform pre-operational inspections.
• How to prepare for a critical lift.
• Procedures for erecting and stowing jibs.
• Correct hand signals & responsibility of signalpersons.
• Procedures for safely working boom trucks near power lines.
• How to comply with OSHA when hoisting personnel with boom trucks.
• Basic rigging procedures: wire rope, slings, hardware, lifting devices, etc.
HANDS-ON
• Pre-operational inspection
• Proper boom truck setup
• How to install & reeve load blocks & headache balls
• Principles of boom truck operation
• How to control load swing
• Safety devices & operational aids
• How to stow & erect extensions & jibs
• Start-up and shutdown
YOU WILL RECEIVE
2010 Schedule
• Boom Truck Operator workbook
Orlando, FL Jan. 18-22 Orlando, FL July 26-30 • Mobile Cranes handbook
Orlando, FL April 26-30 Orlando, FL Oct. 18-22 • Rigging handbook
• Pre-operational inspection forms
• Rigger's capacity card
• Hand signal card
• Safety decals
An operator qualification certificate is available to • Certificate of training
those operators who meet the physical, written and • Operator qualification card, if
applicable
experience requirements.
8 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
9. Mobile Crane Inspector & Certification
TELESCOPING BOOM CRANES • LATTICE BOOM CRANES • BOOM TRUCKS • INDUSTRIAL CRANES (CARRY DECKS)
This program enables companies to perform their
own in-house crane inspections, which include the
OSHA required Monthly and Annual Inspections as 4 Days $995
well as the ASME Periodic Inspections.
Inspector Certification $295
Training and certification also ensure that
inspectors meet the OSHA and ASME competency
Sign up 2, get 3rd tuition free!*
and qualification requirements.
YOU WILL LEARN
• How to inspect your mobile cranes in-house.
• How to set up a mobile crane inspection program.
• What constitutes a competent and qualified mobile crane inspector.
• How to identify individual components.
• Understanding and applying the three levels of inspection.
• OSHA and ASME mobile crane inspection requirements.
• The role of mobile crane inspectors in reducing crane accidents & liability
exposure.
• How to interpret & apply OSHA & ASME crane safety standards.
• Inspection procedures and techniques.
• How to recognize immediate and potential hazards.
• How to interpret load charts when performing a load test.
• How to select the correct rigging equipment when performing a load test.
• The correct way to write inspection reports.
• When to perform a non-destructive crack detection test.
• How to inspect structural components, booms, jibs, gears, drums, sheaves,
blocks, hooks, operating mechanisms, hydraulic and pneumatic systems,
hydraulic cylinders, wire rope, operational aids, etc.
YOU WILL RECEIVE
• Mobile Crane Inspector workbook
• Rigging handbook
• OSHA & ASME standards
• Monthly wire rope & hook
inspection forms
• Periodic & annual inspection forms
for boom trucks, lattice and
Hands-On Training included telescoping boom cranes
in all Orlando Programs! • Sheave gauge
2010 Schedule • Inspection certificate decal
• Rigger's capacity card
Orlando, FL Jan. 12-15 San Antonio, TX June 15-18
Anchorage, AK Jan. 12-15 Guam June 21-24 • Hand signal card
Pittsburgh, PA Jan. 19-22 Savannah, GA July 13-16 • Safety decals
Las Vegas, NV Jan. 19-22 Baltimore, MD July 20-23
• Certificate of training
Denver, CO Jan. 26-29 Kansas City, KS July 20-23
Hartford CT Feb. 2-5 Orlando, FL July 27-30 • Inspector certification card, if
Seattle, WA Feb. 9-12 Charlotte, NC Aug. 3-6 applicable
Orlando, FL Feb. 16-19 Milwaukee, WI Aug. 17-20
Minneapolis, MN Feb. 16-19 Houston, TX Aug. 24-27
Houston, TX Feb. 23-26 Nashville, TN Sept. 21-24 INSPECTOR CERTIFICATION REQUIREMENTS
Salt Lake City, UT March 2-5 Columbus, OH Sept. 28-Oct. 1
Chicago, IL March 9-12 Portland, OR Oct. 5-8 • Complete a Crane Institute of America Mobile Crane Inspector training program.
Charleston, WV March 16-19 Anchorage, AK Oct. 12-15 • Pass a written examination.
Phoenix, AZ March 16-19 Philadelphia, PA Oct. 19-22
• Have three (3) years experience working in a capacity of operation,
St. Louis, MO March 23-26 Orlando, FL Oct. 26-29
Orlando, FL April 13-16 Baton Rouge, LA Oct. 26-29
maintenance, repair, inspection, safety or supervision with telescoping and/or
Nashville, TN April 20-23 Atlanta, GA Nov. 9-12 lattice boom cranes.
Birmingham, AL April 27-30 Seattle, WA Nov. 16-19 A trainee certification is available for personnel who do not meet
Newark, NJ May 11-14 Dallas, TX Nov. 30-Dec. 3 inspector experience requirements.
Tulsa, OK May 18-21 Buffalo, NY Dec. 7-10
Honolulu, HI June 1-4 Orlando, FL Dec. 14-17
*See registration details on page 31.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 9
10. Tower Crane Operator & Inspector Certification
SELF-ERECTING • HAMMERHEAD TOWER CRANES • LUFFING TOWER CRANES
After completion of this training and certification
4 Days $995
program, operators and inspectors will meet the
OSHA and ASME competency and qualification
requirements.
Also, this program enables companies to perform
Operator Certification $95
their own in-house crane inspections, which Inspector Certification $295
include the OSHA required Daily, Monthly and
Annual Inspections as well as the ASME Periodic YOU WILL LEARN
Inspections.
• Causes and results of tower crane accidents.
2010 Schedule • Types, components, and terminology of tower cranes.
• Understanding and using rated capacity charts.
Orlando, FL Feb . 23-26 Orlando, FL Aug. 31-Sept. 3
Orlando, FL June 29-July 2
• Safe operating practices and procedures.
Orlando, FL Nov. 30-Dec. 3
• Operator, rigger and supervisor responsibilities.
• Hand signals, radios and other ways to direct the crane operator.
• Procedures for safely working tower cranes around power lines.
• How to comply with OSHA’s requirements when hoisting personnel.
• Basic rigging procedures: wire rope, slings, hardware, lifting devices, etc.
• What constitutes a competent and qualified tower crane inspector.
• How to inspect your tower cranes in-house.
• Understanding and applying the three levels of inspection.
• OSHA and ASME tower crane inspection requirements.
• The role of tower crane inspectors in reducing crane accidents & liability
exposure.
• How to interpret & apply OSHA & ASME tower crane standards.
• The correct way to write inspection reports.
• How to inspect structural components, booms, jibs, gears, drums, sheaves,
blocks, hooks, operating mechanisms, electrical system, power plants,
braking systems, hydraulic and pneumatic systems, safety devices and
operational aids.
YOU WILL RECEIVE
• Tower Crane Safety &
Inspector workbook
• Rigging handbook
• OSHA & ASME standards
OPERATOR CERTIFICATION REQUIREMENTS • Periodic & annual inspection
• Pass a physical examination. A CDL physical is acceptable. forms
• Complete a Crane Institute of America Tower Crane Operator & • Hand signal card
Inspector training program. • Rigger's capacity card
• Pass a written examination. • Sheave gauge
• Have a minimum of 2 years operating experience. • Inspection certificate decal
• Safety decals
INSPECTOR CERTIFICATION REQUIREMENTS • Certificate of training
• Complete a Crane Institute of America Tower Crane Operator • Inspector and operator
& Inspector training program. certification card, if
applicable
• Pass a written examination.
• Have 3 years experience working in a capacity of operation,
maintenance, repair, inspection, safety or supervision of
tower cranes.
A trainee certification is available for personnel who do
not meet operator/inspector experience requirements.
10 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
11. Overhead Crane Safety & Inspector Certification
CAB OPERATED • PENDANT OPERATED • REMOTE CONTROL OPERATED
For operators, inspectors and other personnel who
require a thorough knowledge of overhead and
gantry cranes, monorail systems and hoists. This 4 Days $995
program enables companies to perform their own
in-house crane inspections, which include the OSHA Operator Certification $95
required Monthly and Periodic Inspections. Training
and certification also ensure that operators and Inspector Certification $295
inspectors meet the OSHA and ASME competency
and qualification requirements. Sign up 2, get 3rd tuition free!*
YOU WILL LEARN
• Causes & results of overhead crane accidents.
• Types, components and terminology of overhead cranes.
• Pre-lift considerations.
• Safe operating practices and procedures.
• How to give correct hand signals and responsibilities of signal persons.
• How to control load swing.
• Operator, rigger and supervisor responsibilities.
• Rigging: wire rope, slings, chain, rigging hardware, lifting devices,
calculating sling loading, determining load weight, safe rigging practices
and procedures and how to prepare a lift plan.
• How to perform daily, monthly and periodic inspections.
• The role of inspectors in reducing overhead crane accidents and liability
exposure.
• How to recognize immediate and potential hazards.
• How to interpret & apply OSHA & ASME overhead crane safety standards.
2010 Schedule • Inspection procedures, techniques & checklists.
• Record-keeping requirements and the correct way to write inspection
Pittsburgh, PA Jan. 5-8 Detroit, MI June 15-18 reports.
Orlando, FL Jan. 26-29 Guam June 16-18
• Selecting the right inspection tools for the job.
Anchorage, AK Feb. 9-12 Charleston, WV June 29-July 2
Buffalo, NY Feb. 16-19 Chicago, IL Aug. 10-13 • How to perform overhead crane load tests following ASME procedures.
Seattle, WA Feb. 23-26 Louisville, KY Aug. 24-27 • How to select correct rigging when performing a load test.
Denver, CO March 2-5 Pittsburgh, PA Sept. 14-17 • How to inspect bridges, end trucks, trolleys, runways, rails, footwalks,
Orlando, FL March 16-19 Columbus, OH Oct. 19-22 gears, drums, sheaves, blocks, hooks, operating mechanisms, control
Milwaukee, WI May 4-7 Newark, NJ Nov. 2-5
systems, braking systems, hydraulic & pneumatic components, electrical
Orlando, FL May 11-14 Dallas, TX Nov. 9-12
equipment, safety devices & operational aids, etc.
Newark, NJ May 25-28 Orlando, FL Nov. 16-19
Houston, TX June 8-11 Minneapolis, MN Dec. 14-17
YOU WILL RECEIVE
OPERATOR CERTIFICATION REQUIREMENTS
• Overhead Crane Safety &
• A doctor’s statement for a recent physical examination. Inspector workbook
(Applicable to cab operated cranes only.) • Rigging handbook
• Complete a Crane Institute of America Overhead Crane Safety • Annual/periodic & monthly
& Inspector training program.
inspection checklists
• Pass a written examination.
• Sheave gauge
• Have a minimum of 2 years operating experience.
• Rigger's capacity card
INSPECTOR CERTIFICATION REQUIREMENTS • Inspection certificate decal
• Complete a Crane Institute of America Overhead Crane Safety • Hand signal card
& Inspector training program. • Safety decals
• Pass a written examination. • Certificate of training
• Have 3 years experience working in a capacity of operation, • Certification card, if applicable
maintenance, repair, inspection, safety or supervision with
overhead cranes.
A trainee certification is available for personnel who do
not meet operator/inspector experience requirements.
*See registration details on page 31.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 11
12. Rigger/Signalperson
An excellent training program for Excellent preparation for taking CIC
construction, industrial and maintenance certification exams and becoming a nationally
craftsmen who use rigging equipment to accredited certified Rigger/Signalperson!
perform their jobs.
2 Days $595
Nationally Accredited
CIC Rigger/Signalperson
Certification - Introductory Offer $99
YOU WILL LEARN
• How to properly use wire rope, chain and synthetic web slings,
rigging hardware, and lifting devices.
• How to interpret capacity charts for wire rope, slings and rigging
hardware when performing proof test.
• The three methods used to calculate sling loading.
• Safe rigging practices and procedures.
• The correct way to give ASME hand signals & voice signals.
• ASME responsibilities of signalpersons.
• Procedures for safely working cranes near power lines.
• How to interpret and comply with OSHA’s steel erection standard.
• How to comply with OSHA requirements when hoisting personnel
with cranes.
• How to perform a pre-use inspection on wire rope, chain and
synthetic web slings, hooks, shackles, eye bolts, hoist rings,
2010 Schedule turnbuckles, spreader/lifting beams, load blocks, sheaves, etc.
• How to determine the weight of a load.
Orlando, FL Jan. 25-26 Orlando, FL July 19-20
Orlando, FL Feb. 22-23 Orlando, FL Aug. 23-24 • How to prepare a lift plan.
Orlando, FL March 22-23 Orlando, FL Sept. 13-14 • How to properly use hoists, chain falls and come-alongs.
Orlando, FL April 19-20 Orlando, FL Oct. 18-19
Orlando, FL May 17-18 Orlando, FL Nov. 15-16
Orlando, FL June 21-22 Orlando, FL Dec. 13-14
YOU WILL RECEIVE
*Rigger/Signalperson & Rigging Equipment Inspector (pg. 13)
programs are scheduled on consecutive days so you can attend • Rigging Safety
both programs in one week! workbook
• Rigging handbook
• Rigging safety reference
card
• Rigger’s capacity card
• Overhead crane hand
signal card
• Sheave gauge
• Safety decals
Coming Soon! • Certificate of Training
Advanced Rigger and Lift Director certifications are • Rigger qualification card,
currently being developed and will be available in 2010. if applicable.
12 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
13. Rigging Equipment Inspector & Certification
WIRE ROPE • SLINGS • HARDWARE • PROOF TESTING
Participants will learn how to inspect all types
of rigging equipment in accordance with OSHA 3 Days $795
and ASME requirements. Inspector certification
will ensure that the inspector is competent and Inspector Certification $295
qualified.
YOU WILL LEARN
HANDS-ON TRAINING • How to set up a rigging equipment inspection program.
• How to identify individual components of rigging equipment.
• The role of rigging equipment inspectors in reducing crane and rigging
accidents and liability exposure.
• Understanding and applying the three levels of inspection.
• How to perform a pre-use, frequent and periodic inspection of rigging
equipment.
• Inspection procedures and techniques.
• The correct way to write inspection reports.
• How to perform rated load tests or proof tests.
• How to inspect wire rope, chain and synthetic web slings, hooks, shackles,
eye bolts, hoist rings, turnbuckles, spreader/lifting beams, load blocks,
sheaves, hoists, chain falls and come-alongs.
• Hands-on training on the inspection of wire rope, chain and synthetic slings.
• Hands-on training on the inspection of rigging hardware.
YOU WILL RECEIVE
• Rigging Equipment Inspector
workbook
• Rigging handbook
• Periodic/annual inspection forms
for wire rope, chain slings,
chainfalls and come-alongs
• Rigger’s capacity card
• Sheave guage
• Inspection certificate decal
• Safety decals
2010 Schedule
• Certificate of training
Orlando, FL Jan. 27-29 Orlando, FL July 21-23 • Certification card, if applicable
Orlando, FL February 24-26 Orlando, FL Aug. 25-27
Orlando, FL March 24-26 Orlando, FL Sept. 15-17
Orlando, FL April 21-23 Orlando, FL Oct. 20-22
Orlando, FL May 19-21 Orlando, FL Nov. 17-19
Orlando, FL June 23-25 Orlando, FL Dec. 15-17
INSPECTOR CERTIFICATION REQUIREMENTS
*Rigger/Signalperson & Rigging Equipment Inspector (pg. 12)
programs are scheduled on consecutive days so you can attend
• Complete a Crane Institute of America Rigging Equipment Inspector
both programs in one week! training program.
• Pass a written examination.
• Have 2 years experience working in a capacity of operation, maintenance,
repair, inspection, safety or supervision with rigging.
A trainee certification is available for personnel who do not meet
inspector experience requirements.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 13
14. Aerial Lift Safety & Inspector Certification
VEHICLE-MOUNTED AERIAL LIFTS • BOOM-SUPPORTED AERIAL LIFTS • SCISSORS LIFTS
Designed for maintenance, construction craftsmen
and other personnel who require a thorough 3 Days $795
knowledge of aerial lift safety. This training and
certification program ensures that operators are Operator Certification $95
qualified and also enables companies to perform
their own aerial lift inspections in-house as Inspector Certification $295
required by OSHA and ANSI.
YOU WILL LEARN
2010 Schedule • Causes and results of aerial lift accidents.
Orlando, FL Feb. 10-12 Orlando, FL Sept. 1-3
• Different types of aerial lifts.
Orlando, FL April 7-9 Orlando, FL Dec. 8-10 • Types, components, and terminology of aerial lifts.
Orlando, FL July 14-16 • How to interpret and use rated capacity charts.
• How to select the right aerial lift for the job.
• Pre-use considerations and setup.
• Safe operating procedures.
• How to recognize immediate and potential hazards.
• How to perform a pre-use, monthly and annual inspection.
• The aerial lift inspector's role in reducing accidents and liability exposure.
• How to interpret and apply OSHA and ANSI aerial lift safety standards.
• Inspection procedures, techniques and checklists that work.
• Understanding and applying the three levels of aerial lift inspection.
• How to comply with OSHA and ANSI recordkeeping requirements.
• The correct way to write inspection reports.
• When to "tag out" the aerial lift.
• Responsibilities of manufacturers, dealers, installers, owners, and users.
• How to inspect booms, structural components, gears, operating
mechanisms, functions and control systems, power plants, braking
systems, attachments, pins and shafts, hydraulic, electric and pneumatic
components, emergency safety devices and operator aids, etc.
YOU WILL RECEIVE
• Aerial Lift Safety & Inspector
OPERATOR CERTIFICATION REQUIREMENTS workbook
• Rigging handbook
• Complete a Crane Institute of America Aerial Lift Safety
& Inspector training program. • Aerial Platform Safety Manual
• Pass a written examination. • Pre-operational inspection
checklists
• Have 6 months operating experience with aerial lifts.
• Annual/periodic inspection
checklists for vehicle-mounted
INSPECTOR CERTIFICATION REQUIREMENTS and boom-supported aerial lifts
and scissors lifts
• Complete a Crane Institute of America Aerial Lift Safety
& Inspector training program. • Rigger's capacity card
• Pass a written examination. • Sheave gauge
• Have 2 years experience working in a capacity of • Inspection certificate decal
operation, maintenance, repair, inspection, safety or • Safety decals
supervision with aerial lifts. • Certificate of training
• Certification card, if applicable
A trainee certification is available for personnel who
do not meet operator/ inspector experience
requirements.
14 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
15. Forklift Safety & Inspector Certification
INDUSTRIAL FORKLIFTS • ROUGH TERRAIN FORKLIFTS
Most personnel operating and working around
forklifts have had little or no quality training. This
training program exceeds OSHA’s new training
3 Days $795
requirements and enables companies to perform
their own OSHA and ASME daily and annual
Operator Certification $95
inspections in-house. Inspector Certification $295
YOU WILL LEARN
2010 Schedule • Causes and results of forklift accidents.
• Types, components and terminology of forklifts.
Orlando, FL Feb. 17-19 Orlando, FL Aug. 11-13 • How to interpret and use rated capacity charts.
Orlando, FL April 28-30 Orlando, FL Nov. 3-5 • Safe operating procedures.
• How to recognize immediate and potential hazards.
• How to comply with OSHA standards when lifting personnel.
• How to perform a pre-use inspection.
• The role of the inspector in reducing forklift accidents and liability
exposure.
• How to set up your own forklift inspection program.
• How to recognize immediate and potential hazards.
• Understanding and applying the three levels of forklift inspection.
• How to keep records that comply with OSHA and ITSDF standards.
• How to interpret and apply OSHA and ITSDF forklift safety standards.
• Selecting the right inspection tools for the job.
• Creating a safe site for inspecting forklifts.
• Inspection procedures, techniques and checklists.
• How to write inspection reports the correct way.
• Types, use, and inspection of forklift attachments.
• Rigging: slings, chain, rigging hardware, lifting devices, calculating sling
loading, determining load weight and safe rigging practices and
procedures.
YOU WILL RECEIVE
• Forklift Safety & Inspector
OPERATOR CERTIFICATION REQUIREMENTS workbook
• Forklifts handbook
• Complete a Crane Institute of America Forklift Safety &
Inspector training program. • Rigging handbook
• Pass a written examination. • Applicable OSHA and ITSDF
standards
• Have 1 year operating experience with forklifts.
• Pre-operational/annual industrial
and rough terrain lift truck
INSPECTOR CERTIFICATION REQUIREMENTS inspection checklists
• Rigger's capacity card
• Complete a Crane Institute of America Forklift Safety &
Inspector training program. • Inspection certificate decal
• Safety decals
• Pass a written examination.
• Certificate of training
• Have 2 years experience working in a capacity of
operation, maintenance, repair, inspection, safety or • Certification card, if applicable
supervision with forklifts.
A trainee certification is available for personnel who
do not meet operator/inspector experience
requirements.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 15
16. Train-The-Trainer Safety Training Programs
MOBILE CRANES • BOOM TRUCKS • OVERHEAD CRANES • RIGGING • AERIAL LIFTS • FORKLIFTS
Learn how to conduct the same training programs that
have made Crane Institute the most recognized and
successful training company in the business! These
Trainer Certification $345 (Classroom only)
valuable train-the-trainer programs are developed
specifically for companies desiring to establish or
upgrade their in-house training programs. Students who YOU WILL LEARN
successfully complete our Train-The-Trainer program may • How adults learn
apply for an additional credential as a Certified Trainer. • How to create a learning environment
• Be more effective with communication
• How to develop & implement a lesson plan
• How to develop visual aids & other training materials
• Training equipment & operation
• Deliver proficient instruction without lectures
TECHNICAL TOPICS
• Equipment components & terminology
• Safe practices & accident prevention
• Inspection procedures & record-keeping
• Applicable OSHA, ITSDF, ANSI & ASME standards
• Load charts & calculating equipment capacities (where applicable)
• Also included are topics specific to individual programs & equipment.
See p. 5-15 for details.
• Hands-On Training in our mobile crane & rigging programs
YOU WILL RECEIVE
All Programs Receive:
• CIA student workbook
• Rigging handbook
• Pre-operational inspection forms for
applicable equipment
• Rigger's capacity card
• Safety decals
• Two safety posters
• Certificate of training
9-DAY CLASS $2,295
• Discounts on books/materials
TRAIN-THE-TRAINER, MOBILE CRANES Mobile Crane and Boom Truck
Orlando, FL Feb. 2-12 Orlando, FL Aug. 10-20 Programs:
Orlando, FL June 8-18 Orlando, FL Nov. 9-19 • Mobile Cranes handbook
• Mobile Crane hand signal card
4-DAY CLASSES $1,395 Overhead Cranes Program:
TRAIN-THE-TRAINER, BOOM TRUCKS • Overhead Crane hand signal card
Orlando, FL Jan. 5-8 Orlando, FL Aug. 3-6 Rigging Program:
Orlando, FL May 25-28 Orlando, FL Oct. 26-29 • Mobile & Overhead Cranes hand
TRAIN-THE-TRAINER, OVERHEAD CRANES signal cards
Orlando, FL Jan. 19-22 Orlando, FL June 29-July 2 Forklifts Program:
Orlando, FL April 20-23 Orlando, FL Oct. 5-8 • Forklifts handbook
• Hoisting Personnel safety reference
TRAIN-THE-TRAINER, RIGGING card
Orlando, FL March 23-26 Orlando, FL Sept. 28-Oct. 1 Aerial Lift Program:
Orlando, FL May 18-21 • Aerial Platform Safety Manual
• Hoisting Personnel safety reference card
TRAIN-THE-TRAINER, AERIAL LIFTS
• Fall Protection field guide
Orlando, FL March 2-5 Orlando, FL Oct. 12-15
Orlando, FL July 20-23
TRAIN-THE-TRAINER, FORKLIFTS
Orlando, FL Feb. 23-26 Orlando, FL July 28-31 Student materials available for purchase at discount prices
Orlando, FL May 4-7 Orlando, FL Oct. 13-16 for those who attend our Train-the-Trainer Programs.
16 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
17. Special Purchase Safety Training Videos
Crane Institute of America offers you Buy 2 or More of the following 7
top-of-the-line DVD’s/VHS’s for all DVD’s/VHS’s and SAVE!
your training programs, safety meet-
ings and refresher programs for mobile Hand Signal Communication
cranes, overhead cranes and rigging. SKU # vid01 dvd01 20 minutes
Since the operator is required to respond to signals given by the signal
person, they must be correct. This video shows how to effectively and
accurately direct the crane using the hand signals required by OSHA and
ASME.
How to Properly Interpret a Load Chart
SKU # vid06 dvd06 25 minutes
Now more than ever, the exact limitations of a crane must be known.
The viewer is guided step by step in how to find gross capacity,
determine capacity deductions, calculate net capacity and determine
parts of a line. Also included is a dramatic accident involving a two-
crane lift.
Overhead Crane Safety
SKU # vid07 dvd07 20 minutes
Inspection, operating practices, operator qualification requirements and
when to lock-out and tag-out overhead cranes are thoroughly covered
in this video. It uses a hands-on approach to provide practical safety
instruction for those working with and around overhead cranes.
Pre-Op Inspection for Lattice Boom Cranes
SKU # vid05 dvd05 18 minutes
The pre-operational inspection is the cornerstone of all safe crane
operations. Using OSHA and ASME as a guide, this video covers the
$305 For the first DVD inspection of control functions, operational aids, booms and jibs, wire
$255 Each additional DVD rope, and other critical components of lattice boom cranes.
$205 Each for All Seven! Pre-Op Inspection for Telescoping Boom
Deduct $10.00 for VHS’s Cranes
SKU # vid04 dvd04 20 minutes
FREE Mobile Cranes Pre-operational inspection is the first job of the day and maybe the most
handbook with the important. Following OSHA and ANSI guidelines, this video covers the
purchase of one or more inspection of control functions and operational aids, booms, jibs, wire
of our crane safety rope, and other critical components of telescoping boom cranes.
DVD’s or VHS’s.
A $29.95 value! Setup for Safety
FREE Rigging handbook with SKU # vid03 dvd03 20 minutes
the purchase of one or more More than fifty percent of all mobile crane accidents are attributed to improper
of our rigging DVD’s setup. This video covers the important areas of crane setup, which include
or VHS’s. site preparation, blocking under outriggers, use of mats for soft surfaces and
A $19.95 value! how to level the crane. A highlight is the animated section illustrating how the
crane and load weight impose force on the ground.
Working Cranes Near Power Lines
SKU # vid02 dvd02 30 minutes
Starting with the pre-lift meeting, the viewer is taken through the
procedures necessary to avoid the lethal results that often occur when
Please note our product return policy on p. 31 cranes contact power lines. A personal account of a worker who lost
three limbs when his crane contacted a power line will leave the viewer
emotionally charged to do the things necessary to avoid contact.
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 17
18. Safety Training Videos
The Best Videos on Cranes and Rigging!
Advanced Tips for Rigging & Lifting
SKU # vadrig $195 dvadrig $205 Forklift 2000 Package AVAILABLE IN SPANISH
Filmed under the guidance of professional riggers, these tips are the SKU # vfpack: 3 Videos & CD $395
result of years of experience. After a quick review of the basics, this OR 4 CD’s $500
video offers tips on how to estimate the weight and center of gravity for Package Contents: (can be purchased individually)
large or odd shaped loads. Topics covered: analyzing loads – the big
picture, determining load weight, sling placement, lift points, odd SKU # vfvid - Forklift 2000 Video - 60 min. $245
shaped loads, productivity and safety tips. 26 minutes Engineering principles, auto/forklift differences, load centers, lateral/longitudinal
engineering, turnovers/ tipovers, rules & maintenance.
Backhoe Loader Pre-Start Inspection
SKU # vssm - Site-Specific Modules Video - 60 min. $195
SKU # vbhlpre $195 dvbhlpre $205 dvbhlpreS $205*
Covers: carbon monoxide poisoning, electric pallet jacks, battery charging, propane
Begin at the beginning. A good daily pre-start inspection helps keep safety, pedestrians - forklifts - walkie stackers.
the machine running reliably all day long. And a good inspection
means more than pulling the dipstick and kicking the tires. Many SKU # vteop - Training For Exp. Operators Video - 16 min. $125
operators have never been taught what they really need to look for. Updates new engineering principles, technical information of new OSHA standards.
This video provides an organized way to check out the machine
before putting it to work. 12 minutes *Available in Spanish SKU # cdfwm - CD-ROM Written Materials - $95
Backhoe Loader Safe Operating
Techniques Fire Extinguisher Training
SKU # vbhlop $195 dvbhlop $205 dvbhlopS $205* SKU # vfext $125 dvfext $205 dvfextS $205*
Lots of people can drive a backhoe loader. A few people can This program explains the various classes of fires, different types
operate one. This video provides tips on how to operate smoothly of fire extinguishers, the key word PASS, and other tips for
and safely in a wide variety of work conditions with several emergency use of fire extinguishers. 17 minutes Available in DVD.
different attachments. 16 minutes *Available in Spanish *Available in Spanish
Construction Forklift Safety Forklift Operator Training
SKU # vcfs $195 dvcfs $205 dvcfsS $205*
SKU # vforks $195 dvforks $205 dvforks $205*
This program is designed to meet mandatory training requirements
Designed for employees responsible for operating forklift
for anyone operating forklifts on the job site. Program details
equipment in a foundry or other industrial settings. Explains forklift
forklift engineering principles, safe operating rules and operator
engineering principles, safe operating rules, forklift maintenance,
maintenance. Excellent program to improve forklift performance
and more. Available in DVD. 16 minutes *Available in Spanish
and safety. Available in DVD. 15 minutes *Available in Spanish
Crawler Excavator Pre-Start Inspection Handling Structural Steel
SKU # vcepre $195 dvcepre $205 SKU # vid08 $195 dvd08 $205 dvd08S $205*
Whether you call it the dipper or the stick, the tool or the bucket, Beginning at the steel fabricator's shop, this video explains OSHA's
the lower or the undercarriage, you need to know what you are new standard "Steel Erection". Also featured are correct techniques
really looking for when you do a pre-start inspection. Operators will for maximizing load stability during transport and rigging
learn to look for things they never thought could give them trouble. techniques for sorting, shaking out and Christmas treeing, with
10 minutes emphasis on how to rig specific type loads. Additionally, the
dangers of improperly chained loads, incorrect load binder use and
Crawler Excavator Safe Operating how to safely release binders are graphically shown when a load
Techniques spills. 28 minutes *Available in Spanish
SKU # vceop $195 dvceop $205
Hand Signals for Construction
There are safe operating techniques to use in sewer work, road
construction, heavy traffic, clinging to a mountainside, taking down
Equipment
a bridge at night or working in a scrap operation. A dynamic video SKU # vgu $195 dvgu $205 dvguS $205*
produced and narrated by real operators, specifically for other This video shows the SAE hand signals in use with various types
operators. 23 minutes of construction equipment in a clear concise manner. Visual use
of the hand signals published as SAE J1307, Verbal explanation of
Fall Protection the correct use of established hand signals, How the machine
SKU # vefpro $195 dvcfpro $205 dvcfproS $205* operator responds to clear signals, The effect of hand signals on
safety, Situations where hand signals may be the best form of
Even a short fall can cause serious ingury or even death. This communication. 11 minutes *Available in Spanish
great training tool covers body harnesses, shock absorbing
lanyards, swing effect, rope grabs, retractable lanyards, and more.
21 minutes *Available in Spanish Please note our product return policy on p. 31
18 Crane Institute of America • 800 832-2726 • www.craneinstitute.com
19. Safety Training Videos
Large Capacity Forklift Operation – Transporting Construction Equipment
Indoor SKU # vtrailer $295 dvtrailer $305 dvtrailerS $305*
SKU # vlcfo $195 dvlcfo $205 New federal regulations in the summer of 2006 affect everyone
transporting construction equipment - whether it’s cross country or
Filmed indoors and outside at a wood processing plant, this video
cross town. Numerous visual examples and easily understood
promotes safe operating techniques. Even seasoned operators will
graphics enhance understanding of complicated regulations.
be reminded of the dangers associated with this equipment. Trailer /
Aggregate Working Load LImit is explained using easy-to-understand
box car loading, Tail swing / overhead clearances, 8 tips for safe,
graphics and real-world examples. 34 minutes.
productive operation, Pick up / transport / delivery of large loads.
*Available in Spanish
19 minutes
Large Capacity Forklift Operation – Trenching And Shoring Operations
Lumber Yard SKU # vtsop $195 dvtsop $205 dvtsopS $205*
SKU # vflumbe $195 dvdflumbe $205 Meets training requirements for those persons assigned the job of
trenching and shoring. Explains the safety rules, requirements, procedures
This video combines the tips and experiences of real lumber yard
and emergency procedures. Available in DVD. 12 minutes
operators with practical safety advice. Real accidents highlighted, *Available in Spanish
Pedestrian and equipment traffic, Design and operating capabilities,
Center of Gravity & safe load transport Night operations & working
on slopes. 23 minutes
Rigging & Lifting with Mobile Wheel Loader Operating Techniques
Construction Equipment SKU # vwlop $195 dvwlop $205 dvwlopS $205*
Recovering from a slide on a side hill, how to avoid slipping into an open
SKU # vrig $195 dvrig $205 dvrigS $205*
excavation, safe road travel, trailer transport techniques, undercutting a
Hydraulic excavators, wheel loaders and rubber-tired backhoes bank, truck loading from stockpiles, loading hoppers, operating near high
were not originally designed to sling load materials. However, they speed traffic or pedestrians, night operations, buried utilities and dozens
frequently are used to lift and handle loads. This video provides other operating situations are covered in this fast-paced video.
easy-to-follow information on the correct rigging and handling 21 minutes *Available in Spanish
when excavation and earthmoving equipment are used to sling and
move loads. 29 minutes *Available in Spanish
Rigging & Lifting with Small Hydraulic Wheel Loader Walk-Around and
Cranes Introduction
SKU # vcrnrig $195 dvcrnrig $205 dvcrnrigS $205* SKU # vwalk $195 dvwalk $205
This is a very important video for anyone who is involved in rigging This walk-around video shows operators how to look for more than
loads to be lifted. Through the use of simple graphics and on-the- fluid levels and leaks, tells them why and what can go wrong if they
job demonstrations, the three basic types of hitches and several miss something. Knowing when, how and why to drain the moisture
variations are clearly shown. The effects of sling angles, rigging out of an air tank can help avoid an accident. This is a video full of
hardware, balance points, sling materials and a dozen other solid advice that even the experienced professionals need to see.
elements affecting safe rigging are graphically addressed and easily 15 minutes
understood. 26 minutes *Available in Spanish
Scaffold Safety Other Titles SKU # Min. Price
SKU # vscaf $99 dvscaf $139 dvscafS $139* Large Capacity Forklift Inspection & Maintenance vlcfim 9:00 $195
Training program for anyone working on or near scaffolding. Basic
Backhoe Loader Maintenance & Transport vbhlmain 11:00 $195
safety rules, operating procedures and how to use scaffolds safely
without injury. Meets training requirements for scaffold safety. Crawler Excavator Maintenance & Transport vcemain 15:00 $195
8 minutes *Available in Spanish Road Crew Safety vcrew 26:00 $195
It Always Happens to the Other Guy vguy 26:00 $195
Seeing Is Believing – Exposing Buried Utilities vsibebu 23:00 $195
Sliding Boom (Telescoping) Forklift
Lifting the Big Ones (Big Cranes, Big Lifts) vidk01 60:00 $145
Operating Techniques
Fire Extinguisher Safety* vfexs 5:00 $69
SKU # vtfot $195 dvdtfot $205
Operators of this equipment are subject to some difficult conditions. *Available in Spanish. All titles available in DVD.
From rough terrain and people on the job site to proper hand signals and
avoiding power lines, this video is a great summary of ten rules to live
by. Importance of Load Charts, Center of Gravity-avoiding tip overs,
Roading the forklift and hills, Steering options and leveling the load. Please note our product return policy on p. 31
Crane Institute of America • 800 832-2726 • www.craneinstitute.com 19