steps of cable joint and End connector for 11 KV

1. Cable joint and end connector
B. Prasad
Chartered Engineer
amieclub@gmail.com

2. Joint for cable type
 XLPE
 Aerial bunched
 PILC
 PVC

3. Specification
Application:
INDOOR/OUTDOOR
Voltage grade: 1.1 KV to
220KV*
System: heat shrink, cold
shrink, push on, tapex, resin
cast

4. Cable Joint
 Excellent mechanical strength cable kit
 Ability to withstand high temperature
 High conductivity cable jointing kit
 Heat & chemical resistance cable kit
 Low thermal insulation jointing kit
 Easy installation & maintenance
 Resistance against shrinkage
 Fine fitting cable kit
 Flame retardant
 UV stability

5. Technical parameter
 Insulation Material Type: XLPE,EPR, MI/MIND
paper insulated cables
 Cable jointing kits Type: Insulation
sleeving,splice
 Cable kits Application: Low Voltage,12 KV,36
KV
 Jointing kits Tensile Strength: 12Mpa
 Jointing kits Material: polyolefin
 Number of Conductors: one, three
 Rated Voltage: 600v
 Character: 1-35kv

6. Parts of straight thru joints

7. IR value measurement

8. Removing semicon layer

9. Ferruling

10. Crimp of ferruling

11. Posting sleeve

12. Sleeve shrinking by blow lamp

13. Combining the shrink cable

14. Wrapping and jointing of earth
ribbon

15. Final sleeving

16. HT End connector for
transformer

17. HT end connector for outgoing
cable

18. HT end connector for outdoor
transformer

19. HT End connector parts
Indooroutdoor

20. Outer sheath removed

21. Layer on XLPE removed

22. Connector ready