Solar to energy conversion.The definition,need for,technologies and the Future of solar energy in the planet earth.
The article is presented by Geofrey Kibiwott yator University of Eldoret.
1. SOLAR ENERGY
COURSE CODE:SES 864E
COURSE TITLE:ENEGY AND ENVIRONMENT
PRESENTED BY:GEOFREY YATOR
COURSE INSTRCTOR: Dr. E. UCAKUWUN
DATE: 17TH FEBRUARY 2014
2. INTRODUCTION
Solar energy is an inexhaustible/renewable resource.
The sun produces vast amounts of renewable solar energy
that can be collected by use of various technologies and
converted to heat and electricity.
Solar energy is clean, releases almost no greenhouse gases,
and produces no waste.
Every year the earth receives 8380 times the amount of
energy spent annually by humankind – 11 billion tons of oil
equivalent.
2
3. History of Solar Energy
The History dates back to 5th century B.C. in the Greeks era. They used
solar passively by designing their homes to capture the sun’s heat
during the winter.
Later, the Romans improved on solar architecture by covering southfacing windows with clear materials such as mica or glass, preventing
the escape of solar heat captured during the day.
Horace de Saussure In the 1760’s built an insulated rectangular box
with a glass cover that became the prototype for solar collectors used to
heat water.
In 1954, three scientists at Bell Labs developed the first commercial
photovoltaic (PV) cells, panels of which were capable of converting
sunlight into enough energy
3
4. History of Kenya
In Kenya solar energy took center stage in the mid 1990’s and by
2013 Kenya had invested more than $500M (Kshs 4.3 bn) on solar
power.
By 2016 the Kenyan government is planning to invest $1.2bn
(Kshs 103billion) on solar energy.
Kenya ranks 22nd in Africa for the amount of electricity it
generates, and 46th in the world in the generation of solar energy.
But it could rank third worldwide for solar in the next four years,
according to figures from the Energy Regulatory Commission
(ERC).
4
5. Uses of Solar Energy
Solar energy has many uses. It can be used to provide heat, light
or to generate electricity.
Passive solar energy refers to the collection of heat and light;
passive solar design, for instance, uses the sun’s energy to make
homes and buildings more energy-efficient by eliminating the
need for daytime lighting and reducing the amount of energy
needed for heating and cooling.
Active solar energy refers to storing and converting this energy
for other uses, either as photovoltaic (PV) electricity or thermal
energy.
5
6. Uses of Solar Energy
Solar Heating
Solar systems that heat water for homes and businesses, and passive solar
design for buildings of all sizes, both have the same effect on the electric grid
as conservation. They do not generate electricity but reduce the demand for
electricity and natural gas.
From 1998 to 2005, the solar water heating market produced about the
thermal equivalent of 124,000 megawatt-hours (MWh) annually.
6
8. Uses of Solar Energy
The most powerful large-scale solar thermal technology,
however, is concentrating solar power (CSP).
CSP can be PV-based, it generally refers to three solar thermal
systems–parabolic troughs, solar dish/engines and power towers–
each of which is in use or under development today.
A solar dish/engine system consists of a solar concentrator –
glass mirrors in the shape of a dish that reflect sunlight onto a
small area
8
10. Uses of Solar Energy
Solar Electricity
A unique advantage of small-scale solar energy systems is that, if they
include storage devices-batteries (dry cell and lithium ion batteries) they
may eliminate the need to connect to the electric grid.
Solar energy through Photovoltaic cells
Photovoltaic cells (PV) are used worldwide to convert sunlight into electricity.
The PV cell contains two layers of semiconducting material, one with a positive charge
and the other with a negative charge.
Several PV technologies are in use or in development. The silicon-based PV cell,
made with the same silicon used in the semiconductor industry, has dominated
the market and continues to do so.
Utility-scale concentrating solar power (CSP) systems, for instance, typically
10
offer capacities of from 50 to 200 megawatts (MW)
12. Impact on the environment
Solar energy technologies generate electricity without producing air or water
pollution.
Most PV systems are installed on existing structures such as homes and
commercial buildings and require no additional land.
CSP plants do not damage the land they are installed in.
Solar electricity can reduce carbon emissions by offsetting the need for
carbon-producing fuels. Example a plant n Austin that will generate about
33.7 Mwh annually can eliminate about 24.5 metric tons of carbon
emissions each year.
PV and CSP systems do not generate solid waste in creating electricity.
12
13. Impact on the environment
Negative Impacts
Their manufacture generates small amounts of hazardous materials such as
arsenic and cadmium, which must be disposed of properly to avoid harm to
the environment and humans.
CSP plants can merely take land out of use for other applications such as
agriculture. Wildlife habitat may be displaced from land used for such
systems.
CSP plants can cause change in the local grounds reflective power (albedo)
causing change in temperatures
CSP plants needs massive land for installation, it is estimated that a typically
CSP plant needs about five to 10 acres of land to produce 1 megawatt of
13
installed capacity
14. The Future of Solar Energy
The future of solar Energy is bright, wider and with great and massive
opportunities backed up by developing technologies.
Currently Solar panels encircling the Moon's equator that would transmit
energy to Earth via microwaves and lasers are being developed it will
provide up to 13,000 terawatts of electricity per year
Japan flipped the switch on its largest solar power plant to date which is
built offshore on reclaimed land jutting into the cerulean waters of
Kagoshima Bay. The mega solar plant generates enough electricity to
power roughly 22,000 homes.
14
15. The Future of Solar Energy
Another technology currently being studied is the solar chimney, whose
operation is based on the principle of circulating air. A flat- plate collector with a
greenhouse-like structure heats the air that rises naturally inside the central
tower. The airflow drives turbines that are connected to generators.
P.V silicon cells are not 100% effective they are 33% effective and this is
because of the wavelengths that its photons absorb sun rays. Technology is being
tested by the Massachusetts Institute of Technology on installing infrared on the
layer before the silicon layer for maximum conversion of wavelengths when this
is done P.V cells will be 77-80% effective.
Planes, motor vehicles (sports, buses and golf course vans) boats are being
installed with P.V panels but they are too expensive to manufacture and can
hardly do 33.4miiles on a single charge without recharge.
15
16. Conclusion
Though the installation and construction of solar power stations is
relatively expensive its renewable nature and the durability of P.V
cells makes solar energy the most reliable source of energy and
the future source to power the planet.
16