TESCO CDS Presentation (october 2012)

© 2012 Tesco Corporation. All rights reserved. 1
TESCO CDS ™
CASING RUNNING
PRESENTATION

Global leader in design and delivery of technology-based
solutions for the drilling industry
Founded in 1986; IPO in 1993
Listed: NASDAQ (TESO)
Market Cap $720 million
Corporate Office in Houston and 5 Business Units worldwide (North America,
Latin America, Middle East & Africa, Asia Pacific, and Europe)
Three Business Lines
1. Top Drives (Sales and Rentals , Aftermarket Sales & Services )
2. Casing Running Services using CDS ™
3. Deep Water Completions
TESCO at a Glance

The Casing Drive System™ (CDS™) assembly
attaches to the bottom of a top drive and
provides a means to perform the following
tasks:
Reciprocate the casing
Rotate to make up a joint of casing
Fill up and Circulate the casing
Rotate the casing string as required
TESCO Casing Drive System™

Eliminates the need for large and
cumbersome travelling elevators.
Eliminates high risk “stabber” position
in derrick.
Eliminates the need for conventional
Fill-Up and Circulation Tools.
Eliminates the need for, and the
hazards of conventional power tongs in a
space restricted area.
Benefits: TESCO Casing Drive System™

Significantly reduces the amount of equipment and personnel
required to run casing.
Provides a high level of mechanization
Keeps personnel out of the line of fire
Can handle casing sizes from 4 ½ - 20”
Places the casing running operation under the control of the driller.
Benefits (cont’d.)

Is quickly installed on any Top Drive system, electric or hydraulic, with
typically no modifications to any existing drilling equipment.
Eliminates Conventional casing operations which cannot rotate pipe.
Eliminates need for separate fill up tools.
TESCO CDS™ allows simultaneous rotation, reciprocation and
circulation of the casing string enhancing capability to get casing to
bottom through troublesome well bores and gaining improved
cementing results.
Benefits (cont’d.)

LINK TILT BAILS
ELEVATORS
HYDRAULIC
ACTUATOR
API 6 5/8” REG RH
CONNECTION
STABBING GUIDE
PACKER CUP
TRIP & TORQUE
GRAPPLE
LENGTH 10’
Main Components
MANDREL

Hose reel and
saddle
Operator Control
Console
Hydraulic Tank
Electric Motor And
Pump
Remote Hydraulic Power Unit

Apply
Release
Safety
Release
CDS LINK
TILT
ELEVATORS
Back
Forward Float Close
Open
Safety
Open
Applied
pressure
Release
pressure
Operator Control Console

The Single Joint Elevators and the Link Tilt Assembly work
together to pick up the joint of Casing from the V-door.

When picked-up, the Link Tilts
and Single Joint Elevator are
centered with the CDS. The
joint is lowered so that the pin
end of the Casing is stabbed
into the stump.
The CDS is then lowered into
the joint of Casing, stopping
before the Stop Bumper.

The CDS Operator then engages the
actuator and the grapples will ramp out
and grip the ID of the casing.
Once the CDS is properly engaged inside
the casing, the CDS operator signals the
driller to engage the top drive to make up
the casing to the preset torque.
Once the connection is made, the CDS tool
takes the weight of the string and the slips
are released and the string is lowered into
the well.
While the string is being lowered the rig
pumps can be engaged to fill the casing,
and if desired, to circulate and reciprocate.

As the joint reaches the floor the single joint elevators can be
extended to receive the next joint of casing.
Once at floor level the slips are
set and the casing string is
released by the CDS.
(A design feature of the tool
prevents release of the casing
with weight on the grapples).

Wireless Torque Turn System (WTTS)

Features and Functions
•Logs data for hydraulic or electric top drives.
•Monitors torque vs. time and torque vs. turns.
•Logs and displays connection number and casing depth.
•Uses an independent load cell to calibrate the top drive signals.
•Allows user to set min/max limits for torque, turns and shoulder values.
•Generates viewer files you can copy to CD or Print.

Wireless Torque Turn System (WTTS)

•Typical rig up: 45 minutes
•500 Ton API 8C capacity
•Torque capacity up to 40,000 ft, LBS.
• Over 120 Million Feet of Casing and counting…..
Performance Data
0
10,000,000
20,000,000
30,000,000
40,000,000
50,000,000
60,000,000
70,000,000
80,000,000
90,000,000
2002 2003 2004 2005 2006 2007 2008 2009
2010
2011

Value Added Products & Services
For Use with

Increase torque limits up to 3 X
Provide a smooth surface within the casing
to allow tools to drift easily.
Increase thread life of coupling.
Rings are inserted into the couplings using
a simple hydraulic installation tool. MLT
rings stay firmly in place during
transportation, handling and use.
TESCO MLT ™ Rings

For wells with well bore
instability when they are drilled,
there is a very high probability
that the casing will be difficult to
run.
In such cases a reaming shoe
with a cutting structure can be
run on the casing to assist the
casing running system in rotating
and washing the casing down.
Warthog 4 ½” – 13 3/8” sizes
Casing Reaming Service

Tesco’s centralizers are utilized in
the casing string to facilitate
improved cementing. The unique
design and attachment method
provides superior strength and
rigidity while maintaining stand off
under large side forces without
crushing.
Hydro-Form Centralizers

Tesco's RTF (radial tubular forming) crimping process
provides a strong and durable mechanical attachment
capable of withstanding high torque.
Crimping
tool
Crimping Tool for Hydroform Centralizers

BENJI GEORGE
Sales Manager Middle East & Africa
Tesco Canada International (Middle East) FZE
PO Box 261769 | Plot No. S10411,
Jebel Ali South Zone, DUBAI, U.A.E.
Benji_George@tescocorp.com
+971 4 8143628 +971 50 3753956
Thank You!

TESCO CDS Presentation (october 2012)

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Destaque

Destaque (12)

Semelhante a TESCO CDS Presentation (october 2012)

Semelhante a TESCO CDS Presentation (october 2012) (20)

Mais de Benji George

Mais de Benji George (14)

Último

Último (20)

TESCO CDS Presentation (october 2012)