You've probably stumbled upon this looking for information about Walkie talkie's, hopefully this wil...

1. DMR Tier III: the open standard for radio communications
You've probably stumbled upon this looking for information about Walkie talkie's, hopefully this will
help you answer some of those questions, if not please click on one of the relevant links within the
article
Private mobile radio is fast becoming an essential communications solution to support the
operational needs of utilities companies, airports, oil and gas pipelines and emergency services.
When compared to public cellular services, it delivers improved coverage, reliability and resistance,
contention, security, group communications and performance.
The digital landscape is crowded, though, with a number of public safety digital standards such as
TETRA, P25 as well as low cost digital solutions including DMR (Digital Mobile Radio), dPMR (digital
Private Mobile Radio), NXDN and PDT (Professional Digital Trunking).
DMR is coming out on top thanks to the open standard nature of DMR Tier III trunking, which is
driving its emergence, ongoing development and adoption across global markets.
But do open standards matter? While open standards are less important in the small system market,
they are critical to the long-term case for the radio system in the medium to large systems sector,
and it is here that open standard DMR Tier III will dominate.
Essentially, DMR Tier III trunking features a control channel on each radio site and allocates traffic
channels on demand making it frequency efficient and enabling a large number of users to share a
relatively small number of channels. Radio sites can easily be inter-connected, usually using IP
connections, making it possible to deploy systems ranging from a single site to hundreds of sites
spread over a large geographical area.
The open standard way
The DMR standard includes the facility for implementers to provide ‘manufacturer
extensions’, enabling manufacturers to provide proprietary features within the framework of
the DMR air interface definition. This allows them to complement the standard set of DMR call
functions with their specific facilities.
This has the advantage of enabling customers to request specific functionalities to support the
manufacturer’s business operation needs and also enables them to provide innovative
features that differentiate their solutions from others implementing the same standard.
One disadvantage to this offering is that interoperability can only be possible for those features that
are fully defined by the standard and that customers using manufacturer extensions are effectively
locked in to a single manufacturer solution rather than enjoying the vendor choice that a standard
enables.
To address the pros and cons, the DMR Association (DMRA) has struck a balance between
robustness and cost with their interoperability process, which focuses on testing the conformance of
products against the published standard that describes the over-air signalling. The DMRA facilitates
testing between a terminal manufacturer and an infrastructure manufacturer, and the two parties

2. carry out the testing against a standard test specification. Test results and logs of all messages sent
over air are recorded during the testing and then are inspected by one or more independent third
parties during a detailed review meeting. Only after the independent third parties are satisfied that
the equipment under test has conformed to the open standard specification is an interoperability
certificate issued.
Ongoing standards development
Whilst this facility can be useful, extensive use of manufacturer extensions would call into question
whether DMR was a standard that delivers interoperability (and therefore vendor choice) or whether
it results in proprietary solutions rather than following an open standard.
The answer to this lies in the work of the DMR Association. The DMRA has a technical working
group – made up of competing manufacturers – who collaborate to ensure the standard
succeeds. Any proprietary features from the manufacturers, which are believed to have wide market
appeal or have useful features the standard doesn’t yet specify, are debated in the group.
They are then developed to further advance the standard to the benefit all of the manufacturers and
indeed the customers who choose to implement DMR technology.
The DMRA is further developing the standard to meet future market demands by identifying
important new features and ensuring these are developed and included in new releases of the ETSI
standards.
The future of DMR Tier III
Open standards are critical to providing long-term support and stability to customers. The adoption
of the standard by a critical mass ensures its longevity over other similar competing technologies
that have lower levels of support by offering the market vendor choice and maintaining low costs.
Is DMR Tier III radio communications’ open standard for the future? Yes. Due to
DMRA’s authority, the robust and well-supported interoperability programme and the long-
term commitment of a large number of manufacturers, it is emerging as the most successful low cost
digital technology for complex projects – and therefore the open standard that no other
private mobile radios can contend with.
Source -
http://www.telecomstechnews.com/news/2014/apr/25/dmr-tier-iii-open-standard-radio-communicatio
ns/