An overview of the Astec Re-Ply Roofing and Ceramic Coating Systems

3. INSULATING COATINGS CORPORATION

4. ISO 9001 REGISTERED MANUFACTURER

5. of the Re-Ply Roofing & Ceramic Coating Systems

6. WINNERS OF THE GREEN AWARD AT THE 2008 GAIA AWARDS

7. PRESENT

8. What is Astec?

9. A water based, acrylic elastomeric ceramic coating that is fluid applied, and cures to a seamless membrane for the restoration and protection of various substrates.

10. FOR MORE THAN 20 YEARS(Since the early 60’s)

12. ON OVER 28 MILLION SQUARE METERS

14. استقرار في كافة الظروف المناخية2. All-climate stability استقرار في كافة الظروف المناخية2. All-climate stability استقرار في كافة الظروف المناخية2. All-climate stability استقرار في كافة الظروف المناخية2. All-climate stability All Climate Stability

15. ON THE OCEAN FRONT

17. IN THE DESERT

19. IN THE TROPICS

21. ON WALLS

23. ON ROOFS

25. ON CONCRETE

27. ON METAL

29. STOPS LEAKS

30. New Orleans Convention Center

31. "Not only have the leaks stopped, but the level of comfort has increased….“ -R.B.C., Madison Air Parts & Supply

32. Sands Convention Center - Las Vegas

33. TREATS & PREVENTS CORROSION

36. FOR COLD STORAGE

37. “Our engineering department reported that the plant is consuming less energy …” -Vice President, Rainier Cold Storage & Ice

39. MILITARY APPLICATIONS

40. US Naval Observatory

41. US Naval Air Museum

42. US Naval Air Museum

43. United States Air Force “… After the application of the coating, the average peak temperature in the warehouse area dropped to 86° F, a decrease of 17° F. “ - James A., Capt. USAF Chief RSD of Civil Engineering

44. Before After

45. United States Army “… a 64° F reduction in roof surface temperature, a 23° F reduction in attic temperature and a 10° F reduction in room temperature as a result of the insulative and reflective value of the coating.” - Benjamin S., Col, Dept. of the Army

46. Camp Robinson, North Little Rock, AR Army Reserve

47. US Armyin the Middle East

49. Treated Tent includes NO Sun shade on Top Treated Tent Contains 2 split Units Un-treated Tent includes a Sun shade on Top Un-treated Tent Contains 3 split Units

50. UN-Treated Tent Temperature Reading in F AUG 6TH,2008 96.4 ̊F AVG Treated Tent Temperature Reading in F AUG.6TH,2008 85.6 ̊F AVG

52. FOR WAREHOUSING

55. “In the past, we have struggled to maintain minus 12° F… Since the application, we have been able to maintain minus 15° F or less.” -Plant Superintendent, Land-O-Sun Dairies

56. COOL WALLS

61. COOL ROOFS

64. FOR INDUSTRIAL USES

65. Thermal Protection

67. A Corrosion Barrier

69. “Astec is amazing, after 4 years the finish on the tanks still look great” -President, Studer Fertilizer

70. Air Ducts Continental Airline Disney American Airlines Campbell’s

72. ON VEHICLES

75. “By our own tests, we have shown a temperature reduction ranging from eight to eighteen percent in the interior ambient temperature…In the blazing Arizona sun, it (Astec) shows virtually no sign of deterioration…” - Hal D., Director of Pupil Transportation, Scottsdale Public Schools

76. ON TANKS

78. ON WATER TANKS

80. “I have avoided to take a shower during noon time and after you have coated ASTEC on my water tank, no issue of hot water in my house any more at any time of the day".

81. Cool Roofs = Good Economics 93 degrees Fahrenheit 178 degrees Fahrenheit

83. Resists standing water

84. Excellent adhesion to a variety of substrates

85. Resists UV exposure

86. Applied at greater film thickness for increased flexibility

87. Resistances to foot traffic, i.e. tensile strength

89. Concrete

90. EPDM (Ethylene –Propylene-Diene-Monomer)

91. Asphalt, Modified Bitumen, BUR

92. Hypalon / PVC

93. SPF (sprayed polyurethane foam)

95. No need to raise equipment on roof.

96. Penetrations

97. Penetrations

98. WaterproofPenetrations

99. Maintenance Fluid Applied roof systems are seamless, require less maintenance Conventional roof systems fail at the seams

100. Seams…separating

101. Repairing seams is standard roof maintenance on seamed roofs. Seamless roofs require less maintenance: lower roof life-cycle costs

102. Seams

103. Tape & Waterproof seams

104. See Seam Sample

105. Metal Seams & Fasteners

106. Seam Preparation

107. Penetration details

108. Penetration details

109. Penetration details

110. Basecoat…multi-layer system

111. Finished Fluid Applied “Cool Roof”

112. Finished Fluid Applied “Cool Roof”

113. Finished Fluid Applied “Cool Roof”

114. Renewability / Sustainability After ten years - extend the life an additional 10 years At only 40 -70% of the original cost of the coating system.

116. Protect from Ultra-violet degradation

117. Eliminates/minimizes roof tear-off.

118. No need to raise equipment on roof.

119. Makes most roofs better than original.

121. ENERGY SAVINGS THROUGH REDUCED TEMPERATURES

122. درع شمسي Solar Shield

123. ON ROOFS

125. REDUCES TEMPERATURES

127. “…almost immediately the room temperature inside was cooled by 19° F.” -Donald E., Yakima Ice Arena

130. “In the past, we have struggled to maintain minus 12° F… Since the application, we have been able to maintain minus 15° F or less.” -Plant Superintendent, Land-O-Sun Dairies

134. Solar Shield

136. Reflects between 80% and 87% or radiant heat

137. Limits radiant heat absorption between 15% and 20%

143. Cool Roofing improves insulation performance “The thermal resistance of insulation installed immediately below a black membrane has been found to be up to 30% lower than advertised, when measured at peak summertime temperatures in Austin, Texas.” - Konopacki and Akbari, 2001

144. “Cool Roofs” increase insulation performance

145. Standard “Pink” insulation Solar reflective coating

146. PROVIDING LEED CREDITS

147. Cool Roof Systems can qualify for 3 LEED Conditions. Sustainable sites Energy Management Indoor Environmental Quality

148. An ENERGY STAR PARTNER Energy Savings

149. LEED Condition: Sustainable Sites Energy Star Standard. Initial reflectance of at least 0.65 reflectance & at least 0.5 when tested in 3 years minimum emissivity of 0.90 for a minimum of 75% of the roof surface.

150. LEED Condition: Energy Efficiency Exceed ASHRAE 90.1 -2004 by 14% Solar reflectance of 0.798 ASTEC = .87 Thermal emittance of 0.855 ASTEC = .91

157. LEED Condition: Indoor Environmental Quality ASHRAE STD 55-2004: Addendum F October 2007 - Issued November 2008 - Completed public review January 2009 - Board meeting for final approval Addendum F expands roof requirements to include cool roofs. If accepted: 1 LEED Point

158. EXTENDING YOUR FACILITY’S LIFE-CYCLE

159. “We can extend the life of existing roofing for a fraction of the cost of conventional roof replacement.” - Benjamin S., Col, Dept. of the Army

160. Renewability / Sustainability After ten years - extend the life an additional 10 years At only 40 -70% of the original cost of the coating system.

163. Astec Benefits LEED credits Sustainable / Renewable Systems Remains flexible Resists standing water Excellent adhesion to a variety of substrates Resists UV exposure / Eliminates thermal shock Reduces surfaces temperatures Resistance to foot traffic, i.e. tensile strength Higher reflectivity and increased emissivity Durable

164. “After we did extensive testing…it appeared that (ASTEC) would do all it was advertised to do and then some…” -Warehouse Manager, Auvil Fruit Company

178. CLICK TO PLAY THE ASTEC “WHY REPLACE” VIDEO : Length 3 Minutes

180. INSULATING COATINGS CORPORATION Phone: +1.607.723.1727 Website:www.icc-astec.com Email: international@icc-astec.com