How to Build a Tower

Objectives ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]

What is a tower?? ,[object Object],[object Object]

BASIC ENGINEERING PRINCIPLES AND DEFINITIONS ,[object Object],[object Object],[object Object],[object Object],[object Object]

BASIC STRUCTURAL SHAPES ,[object Object],[object Object],[object Object]

Step 2: Draw, measure and figure out how much wood you will need to build your tower.

Don’t forget… ,[object Object],[object Object],[object Object],[object Object],[object Object]

Step 3: Make two copies and cut the original and the two copies out.

Step 4: Tape your copies to the cardboard using scotch tape. Then write your first and last name and the class period. Finally, using masking tape, tape on the wax paper. Make sure the wax paper is as flat as possible.

Step 5: Get your wood and begin cutting, pinning and gluing.

DIFFERENT TYPES OF JOINTS Miter joint Lap joint Notch joint Butt joint

[object Object],Wrong Way To Pin

This is the CORRECT way to glue your tower together.

This is NOT the correct way to glue your tower together. You will earn a lunch detention if you waste glue.

Step 6: Take the sides off the wax paper.

Step 7: Take twisty ties and tie each side of your tower together and then glue the sides.

Step 8: Put your name on your tower.

Step 9: It is time to test to your tower!

TWO AWARDS ,[object Object],[object Object]

How to Build a Tower

Recomendados

Recomendados

Mais conteúdo relacionado

Destaque

Destaque (20)

Semelhante a How to Build a Tower

Semelhante a How to Build a Tower (20)

Último

Último (20)

How to Build a Tower