1. UMESH MULMULE
A1/401, WAGHERE EMPIRE
MORWADI, PIMPRI
PUNE [M.S.]
CELL: 9552582862
mulmuleuc@rediffmail.com
ucmulmule@gmail.com
EXPERIENCE SUMMARY: -
17 YEARS OF EXPERIENCE IN PROJECT CO-ORDINATION AND EXECUTION OF EPC PROJECTS.
EXPERIENCE PROFILE:
ENESTEE ENGINEERING LTD. NAGPUR
SINCE SEPT,2014 –
Sr. MANAGER - PROJECTS
RESPONSIBILITIES:- PROJECT MONITORING , CO-ORDINATION WITH FACTORY AND SITE EXECUTION FOR
VARIOUS STRTRUCTURAL FABRICATION AND ERECTION WORKS FOR COAL HANDLING PROJECTS LIKE MSPGCL /
BGR CHANDRAPUR EXPN. [1 X 500 MW] , TRN / BGR NAWAPARA [2X300MW], NMDC / SHAPOORJI PALLONJI
STEEL PLANT , NAGARNAR : STRUCTURAL FABRICATION AND ERECTION OF HOT AND COLD STORAGE YARD
(10,000 MT).
TECPRO SYSTEMS LIMITED, PUNE
SINCE SEPT,2009 – SEPT.2014
DY. GENERAL MANAGER - PROJECTS
RESPONSIBILITIES:- PROJECT MONITORING , ENGINEERING CO-ORDINATION AND SITE EXECUTION FOR AHS
HANDLING PROJECTS LIKE NTPC RIHAND [2 X 500 MW] , NTPC VINDHYACHAL [2X500MW], LANCO ANAPARA [2
X600 MW] , MSPGCL KHAPERKHEDA HCSD SYSTEM [1 X 500 MW] AND PARTLY ASSOCIATE FOR SUPERCRITICAL
PROJECT NTPC SIPAT [3X660 MW]
ACITIVITY:
• EFFECTIVE CO-ORDINATION FOR VARIOUS PROJECT ENGINEERING ACTIVITIES BETWEEN THE
EXTERNAL AGENCIES LIKE THE CUSTOMER (NTPC), OUR CONSULTANTS, SITE CONTRACTORS AND
INTERNAL DEPARTMENTS LIKE DESIGN DEPARTMENT, PURCHASE DEPARTMENT, INSPECTION
DEPARTMENT, WORKSHOP & OUR SITE OFFICE ESTABLISHMENT.
• COORDINATION WITH VENDORS, OUR DESIGNERS AND CLIENT FOR ENGINEERING OF EQUIPMENTS.
• PLANNING OF PROJECT COMPLETION SCHEDULE FOR MONITORING THE PROJECT ACITIVITY.
• PLANNING OF MATERIALS AND RESOURCES, MONITORING THE CRITICAL ACTIVITIES, MONTHLY,
WEEKLY AND DAY TO DAY TARGETS WITH CONTRACTORS, CO-ORDINATION WITH SITE , CLIENT, INTER
DEPARTMENTAL & CONTRACTORS, CERTIFICATION OF BILLS OF CONTRACTORS.
• ORDER FINALISATION OF SITE CONTRACTORS AND EXECUTION AT SITE AS PER CLIENT’S SCHEDULE.
• CORDINATION WITH PROCUREMENT DEPARTMENT FOR FINALISATION OF ORDERS.
• PREPARATION OF CATCH UP PLANS CONSIDERING SHORT FALL ANALYSIS AS PER AVAILABLE
RESOURCES.
• PLANNING OF ANY SHORTCOMING LIKE MATERIAL , MANPOWER AND MACHINERIES FOR PROJECT
EXECUTION.
• COLLECTION OF PAYMENT FROM CLIENT , MONITORING OF CASH FLOW OF PROJECT.
TOYO ENGINEERING INDIA LTD, MUMBAI
SINCE NOV.2008 – AUG,2009
PRINCIPAL ENGINEER (CONSTRUCTION DIVISION)
PROJECT MONITORING IN CONSTRUCTION DIVISION :

2. 1) ONGC MANGLORE PETROCHEMICAL LTD. IMPLEMENTAING AROMATIC COMPLEX PROJECT AT
MANGLORE. PROJECT COST Rs. 4852 Crore.
2) HPCL VIZAG – REFINARY PMC PROJECT.
RESPONSIBILITY:
• INTERNAL KICK-OFF MEETING.
• STUDY OF SALIENT POINTS OF PROJECTS LIKE LSTK’s , PMC’s, EPCM’s Scope, ANY PROJECT SPECIFIC
REQUIREMENT, CONTRACT DOCUMENTS.
• PREPARATION OF CONSTRUCTION PLAN WITH VARIOUS PLANNING ACTIVITIES LIKE TEMPORARY
FACILITIES – SITE OFFICE, FABRICATION YARD, STORAGE YARD (CLOSED AND OPEN)
• WORK OUT FOR CONSTRUCTION POWER AND WATER
• MANPOWER DEPLOYEMENT
• SUB-CONTRACTING PHILOSOPHY.
• PREPARATION AND MONITORING OF CONSTRUCTION SCHEDULE AND BUDGET.
• PREPARATION AND RESPONSIBLE FOR APPROVAL OF STANDARD CONSTRUCTION SPECIFCATION AND
PROCEDURES AS PER JON SPECIFIC TO CLIENT.
• PLANNING FOR ODC CARGO TRANSPORTATION UPTO SITE.
• PLANNING FOR HEAVY LIFT ERECTION.
• FINALISATION OF SUB-CONTRACTING PHILOSOPHY WITH CLIENT.
• BID DOCUMENT PREPARATION AND FLOATING OF ENQUIRIES FOR SUB-CONTRACTING WORK (LIKE
SOIL INVESTIGATION, PILING, CIVIL & STRUCTURAL WORK , PIPING & MECHANICAL , ELECTRICAL,
INSTRUMENTATION AND INSULATION WORKS).
• EVALUATION OF BIDS , NEGOTIATION AND ISSUANCE OF WORK ORDER AFTER FINALISATION
THROUGH MANAGEMENT.
• PARTICIPATION IN KICK OFF MEETING WITH SUB-CONTRACTOR AT SITE.
• CO-ORDINATION WITH RESIDENT MANAGE, SITE ENGINEERS AND SUB-AGENCIES AT SITE FOR
EXECUTION OF PROJECT.
• MATERIAL CONTROL CO-ORDINATION WITH SITE AND OTHER DEPTS.
• WEEKELY / MONTHLY MEETING WITH CLIENT AND SUB-AGENCIES FOR PROJECT PROGRESS REVIEW.
• PAYMENT COLLECTION FROM CLIENT.
EMCO LTD, MUMBAI
SINCE MAY2008 – NOV,2008
DY. MANAGER– BOP – EPC PROJECTS
PROJECT: - 2 X 135 MW (1ST
PHASE ) + 1 X 300 MW (2ND
PHASE) COAL BASED THERMAL POWER PLANT AT
WARORA NEAR NAGPUR
RESPONSIBILITIES: - PROJECT CO-ORDINATION FOR VARIOUS BALANCE OF PLANT PACKAGE LIKE ASH
HANDLING PLANT, COAL HANDLING PLANT, TRAVELLING WATER SCREEN, FIRE FIGHTING SYSTEM, AIR
COMPRESSORS & CRANES, ELEVATORS ETC.
ACITIVITY:
1. PREPARATION OF TENDER SPECIFICATION OF VARIOUS BOP PACKAGES AFTER DISCUSSION WITH
CONSULTANT.
2. EVALUATION OF TECHNICAL AND COMMERCIAL OFFERS OF EPC VENDOR / PACKAGE VENDOR.
3. CO-ORDINATION WITH DESIGN CONSULTANT.
4. FOLLOW-UP WITH EPC CONTRACTOR AND THEIR VARIOUS VENDORS, SUB-VENDORS FOR ORDERING
OF VARIOUS PACKAGES / EQUIPMENTS / ITEMS RELATED TO THE SYSTEM.
5. PREPARATION OF DETAIL PROJECT SCHEDULE FOR MONITORING THE PROJECT ACITIVITY.
6. EFFECTIVE CO-ORDINATION WITH SITE OFFICE FOR VARIOUS SITE / PROJECT ACTIVITIES.
7. REVIEW OF DRAWINGS & DOCUMENTS AFTER DISCUSSION WITH DESIGNER.

3. TATA PROJECTS LTD; MUMBAI
SINCE AUG. 2007 - MAY2008
SR. PROJECT ENGINEER – EPC PROJECT EXECUTION & TENDERING
RESPONSIBILITIES:- TENDERING AND PROJECT EXCUTION.
TENDERING
• IDENTIFICATION OF NEW BUSINESS OPPORTUNITIES TENDERS
• TO UNDERSTAND THE SCOPE & FEASIBILITY AS PER TENDER DOCUMENTS.
• TO PREPARE AND DISCUSS PRE-BID QUERIES (TECHNICAL & COMMERCIAL) WITH CLIENT.
• COORDINATE WITH CONSULTANT (if appointed) FOR BOQ / DESIGN DETAILS.
• PREPARATION / CHECKING OF BOQ WITH TENDER SPECIFICATION AND SCOPE.
• OFFER PREPARATION WITH ALL TECHNICAL DETAILS.
• COST ESTIMATION AS PER BOQ.
• TECHNICAL & COMMERCIAL QUERIES OF ALL PRE-BID AND POST BID QUERIES.
• PREPARATION OF CONTROL BUDGET AFTER GETTING AN ORDER FROM CLIENT.
MAHINDRA ASHTECH LTD., PUNE, INDIA
SINCE SEPT. 1999 – AUG, 2007
(WHOLLY OWNED SUBSIDIARY OF MAHINDRA & MAHINDRA LTD.)
SR. PROJECT ENGINEER
A] PROJECT HANDLING :
NTPC NTPC BADARPUR (2 X 210 MW) , MSPGCL PARAS (1X500 MW) , NTPC SIMHADRI (1 X 500 MW) , MSPGCL
KHAPERKHEDA – DRY FLY ASH UNLOADING SYSTEM BELOW SILO THROUGH AIR SLIDE ARRANGEMENT,
ALSO ASSISTED TO PROJECT MANAGER FOR SUPERCITICAL POWER PROJECT (3X660 MW) NTPC SIPAT.
 RESPONSIBILITIES:-
• EFFECTIVE CO-ORDINATION FOR VARIOUS PROJECT ENGINEERING ACTIVITIES BETWEEN THE
EXTERNAL AGENCIES LIKE THE CUSTOMER (NTPC), OUR CONSULTANTS, SITE CONTRACTORS AND
INTERNAL DEPARTMENTS LIKE DESIGN DEPARTMENT, PURCHASE DEPARTMENT, INSPECTION
DEPARTMENT, WORKSHOP & OUR SITE OFFICE ESTABLISHMENT.
• CHECKING OF P&ID , LAYOUT AND BILL OF MATERIALS AS PER REQUIREMENT WITH DESIGNER AND
FOLLOW-UP WITH VENDOR FOR EARLY APPROVAL.
• CHECKING OF VALVE SCHEDULE, PIPE & FITTING SCHEDULE AS PER LAYOUR AND P&ID’S
• PRPARATION OF L-2 AND L-3 DETAILS PROJECT SCHEDULE FOR MONITORING THE PROJECT ACITIVITY.
• REVIEW OF COMMENTS RECEIVED FROM CLIENTS ON DRAWINGS & DOCUMENTS AND SEND TO
CUSTOMER FOR APPROVAL AFTER DISCUSSION WITH DESIGNER.
• PLANNING OF MATERIALS AND RESOURCES, MONITORING THE CRITICAL ACTIVITIES, MONTHLY,
WEEKLY AND DAY TO DAY TARGETS WITH CONTRACTORS, CO-ORDINATION WITH HO , CLIENT, INTER
DEPARTMENTAL & CONTRACTORS, CERTIFICATION OF BILLS OF CONTRACTORS.
• DEPUTED FOR ERECTION AND COMMISSIONING ACTIVITES AT SIMHADRI SITE FOR 2 YEARS.
• SINGLE POINT CONTACT RESPONSIBILITY INCLUDING DRAWING APPROVAL , ESTABLISHMENT OF
SITE , ORDERING , EXECUTION AND COMMISSIONING AND BILLING FOR DRY FLY ASH UNLOADING
SYSTEM BELOW SILO NO.1 BY AIR-SLIDE ARRANGEMENT AT MSPGCL KHAPERKHEDA.

4. B ] VALUE ADDED RESPONSIBILITY :- SPARES [2003-2008]:-
• TO SET YEARLY TARGET FOR ORDER BOOK BASED ON INPUTS FOR SPARE PARTS, AFTER SALES &
SERVICE. TO CHALK OUT ACTION PLAN FOR FOLLOWUP WITH DIFFERENT PROJECT SITE / CLIENTS
( ALL INDIA ).
• TO STUDY CLIENT’S REQUIREMENT AND DRAWINGS, ESTIMATION & COSTINGS AND PREPARATION OF
OFFERS FOR SPARE PARTS, REFURBISHMENT JOBS ETC.
• TROUBLE SHOOTING AT SITE BASED ON THE FEED BACK FROM CLIENT’S ENGINEERS AND
SUPERVISION SERVICES / OVERHAULING JOBS.
• PREPARE TENDER ENQUIRY FOR LONG TERMS, SHORT TERM CONTRACTS / REFURBISHMENT /
OVERHAULING JOBS AND FINALISATION OF ORDERS.
• SITE VISITS, TECHNO-COMMERCIAL DISCUSSION WITH THE CLIENT FOR MORE ENQUIRIES & ORDERES
FOR SHORT TERM CONTRACTS / SPARE PARTS.
• ORGANIZING MAINTENANCE SET UP AT PROJECT SITES FOR ASH HANDLING SYSTEM AND TRAVELLING
WATER SCREEN (TATA POWER CO. LTD. TROMBAY TPS, BSES DAHNU TPS, CSEB KORBA TPS,
MANIKGARH / MSPGCL KHAPERKHEDA TPS).
• DAY-TO-DAY COORDINATION WITH CUSTOMERS / CLIENTS AND BRACH OFFICES FOR ENQUIRIES,
OFFERS/ ORDERS.
• EXECUTION OF SHORT TERM CONTRACT / SPARE PARTS ORDERS, FOLLOWUP WITH DESIGN ENGG. ,
PPC, PURCHASE, INSPECTION & QC DEPTS & ACCOUNTS FOR EARLY EXECUTION OF ORDERES.
DECCAN MECHANICAL & CHEMICAL INDUSTRIES LIMITED, AHEMADNAGAR
OCT 1998 - SEPT. 1999
PRODUCTION ENGINEER
MANUFACTURING UNIT
LINK AND CONVEYER MANUFACTURING
THE UNIT MANUFACTURED AND SUPPLIED CHAIN CONVEYERS FOR ROURKELA STEEL PLANT, BHILAI STEEL
PLANT, INDORAMA, BHEL, NIRMA ETC. FOR THEIR PROCESS & MANUFACTURING UNITS.
• PRODUCTION IN-CHARGE & RESIDENT ENGINEER
• RESPONSIBILITIES INCLUDE PRODUCTION PIPELINE MANAGEMENT, INSPECTION AND QUALITY ASSURANCE
• ALSO RESPONSIBLE FOR MATERIAL MANAGEMENT
DECCAN MECHANICAL & CHEMICAL INDUSTRIES LIMITED, BARAMATI (PUNE)
JULY 1998 - SEPT. 1998
QUALITY ASSURANCE ENGINEER (TRAINEE)
MANUFACTURING UNIT
SPIRAL WELD PIPE DIVISION
THE UNIT MANUFACTURED AND SUPPLIED SPIRALLY WELDED PIPES FROM COILS MAINLY FOR TATA IRON &
STEEL COMPANY LTD. (TISCO)
• WORKED AS QUALITY ASSURANCE ENGINEER IN SHIFT
• RECEIVED HANDS-ON TRAINING ABOUT INSPECTION AND QUALITY ASSURANCE PROCEDURE

5. EDUCATIONAL QUALIFICATIONS
• BACHELOR OF ENGINEERING IN MECHANICAL ENGINEERING FROM YESHWANTRAO CHAVAN COLLEGE OF
ENGINEERING, NAGPUR, INDIA IN JUNE 1997 (FIRST DIVISION)
• PROFESSIONAL DIPLOMA IN ADVANCED AUTOCAD RELEASE 13, KNOWLEDGE OF AUTOCAD RELEASE 14
AND AUTOCAD 2000 AND MS PROJECT 2000.
PERSONAL DETAILS
NAME UMESH CHARUCHANDRA MULMULE
DATE OF BIRTH JUNE 08, 1975
SEX MALE
NATIONALITY INDIAN
MARITAL STATUS MARRIED
PASSPORT STATUS VALID
REFERENCES WOULD BE FURNISHED ON REQUEST

6. EDUCATIONAL QUALIFICATIONS
• BACHELOR OF ENGINEERING IN MECHANICAL ENGINEERING FROM YESHWANTRAO CHAVAN COLLEGE OF
ENGINEERING, NAGPUR, INDIA IN JUNE 1997 (FIRST DIVISION)
• PROFESSIONAL DIPLOMA IN ADVANCED AUTOCAD RELEASE 13, KNOWLEDGE OF AUTOCAD RELEASE 14
AND AUTOCAD 2000 AND MS PROJECT 2000.
PERSONAL DETAILS
NAME UMESH CHARUCHANDRA MULMULE
DATE OF BIRTH JUNE 08, 1975
SEX MALE
NATIONALITY INDIAN
MARITAL STATUS MARRIED
PASSPORT STATUS VALID
REFERENCES WOULD BE FURNISHED ON REQUEST