Tech n computing

Introduction to NComputing

Siam Network & Computer Co., Ltd.
Dell Corporation (Thailand) Co., Ltd.

Agenda
Agenda
 NComputing & SNC Company background
 What is “Multi User Computing”?
Product Overview
L Series
X Series
Management Software
 Basic Setting L-Series & NCT-2000 XP Console
 Basic Setting X-Series & NCX-2000 XP Console
 Advance Setting X&L-Series
 Setting NControl
 FAQ
 Q&A

NComputing Background
 Our Vision:

Expand Access & Dramatically Lower
Computing Costs
Through Multi-User Computing

 Our Solution:
Enables a single PC to be used by
multiple users at once:
 It is simple to create, low cost, easy to maintain, eco
friendly and will dramatically lower computing costs

 Our Success:
We are the fastest growing “Multi-User Computing”
company in the world with over three hundred
thousand units deployed in over 80 countries

SNC Background

Siam Network and Computer
founded in 1999 with professional
team for network implement in
corporate and government
2004 SNC was a partnership
with Ncomputing to distribute terminal
unit computing in NComputing brand

SNC Best Performance Award
2005 from NComputing

What is “Multi User Computing”?

NComputing is a terminal unit that does not require CPU , hard-
drive, or CD-Rom. With the exclusive UTMA (Ultra Thin Multi-
Access) technology, User have the ability to expand PC up to 10
computer terminals costs less than a traditional PC.

The Idea
Share excess computing resource and redistribute

Capacity of the average CPU is
under-utilized (using less than 10%!)
Turn 1 PC to 30 Virtual PCs

< CPU meter >

NComputing Solution
All-inclusive Multi-User Computing technology

NComputing
NComputing unique
Terminal Server
SoC based
S/W on
Access Terminal
Host Computer
• Lowest cost and slim
• Proprietary Terminal Service Software • Faster and silent
• Runs on ordinary PC Desktop Streaming Protocol • Easy to expand, install
• Supports any Operating System • Less Power (< 5W)
Including Windows XP, Linux OS • NComputing’s UXP (User eXtension Protocol) • Various form factors
not only Server OS. • Secure and faster than RDP • No embedded OS
• Optimized for fast screen refresh • Smart Boot loader built-in
• Flexible to customize

Product Overview
X-Series:
 Up to 7 users can share one PC
 Direct connection via UTP cable (10 m / 33 ft)
 X300 kit includes:
 1 PCI card with 3 ports
 3 access terminals
PCI-based  Terminal services software

L-Series:
 Up to 30 users can share one PC
 Ethernet connection over any distance
 Each L Series access terminal includes:
Ethernet-Based
 1 access terminal
 Terminal services software

Management Software:
 NControl: monitor/remote control 128 sessions

NComputing X Series
 Most popular solution for schools
 Just less than ฿4,000 per seat to add users to PC
 Hardwired connection up to 33 feet
 Up to 3 users per PCI card
 Max of 7 users per PC
 Terminal services software on host PC enables
simultaneous sharing and management of
student sessions
 Access terminal connections:
 VGA (up to 1024x768 resolution)
 Keyboard
 Mouse
 Speaker output
 No separate power input required
(supplied by PC through CAT 5 cable)
 USB ports on host PC can be assigned to
individual users

NComputing X Series

Note: Four users can share a PC running with one X300 kit.
Seven users can share with two X300 kits.

NComputing L Series
 Flexible Ethernet connection enables any
distance between host PC and users
 Terminal services software on host PC
enables simultaneous sharing and
management of sessions
 Up to 10 users on desktop OS
 Up to 30 users on server OS
(Windows 2003 Server or Linux)
 Access terminal connections:
 VGA (up to 1440x900 resolution)
 MIC Port (L230 only)
 USB Flash Drive Port (L230 only)
 PS/2 keyboard
 PS/2 mouse
 Speaker output
 DC Power input (~5 Watts)

Setting L Series

 “Full” Windows XP or Linux Desktop user experience
 Up to 10 users can share a PC running a desktop OS and up 30 users can
share if the host hardware is running Windows 2003 Server or Linux
 Cost INCLUDING terminal services software
 Deploy within 1 hour. Can use existing imaging tools, policies, etc.
 Integrates within existing PC management process
 Stateless Design: No data at desktop, no embedded OS
 High Security – Flash memory ports are optional and can be turned off

NComputing L Series
New Model

L130 L230

USB Memory* Speaker PS/2 Keyboard
RJ-45 VGA Power On/Off and Mouse
Microphone*
(Common to both the L130 & L230)
(*L230 Only)

NComputing L Series

L130 L230
USB port No Yes^
Microphone No Yes
Widescreen 1440 x 900* 1440 x 900
Color Support 16-bit 24-bit
VESA mount Yes Yes
OS Support Win/Linux Win/Linux

Notes:
• *16-bit Only in the L130 (24-bit in the L230)
• ^ NComputing Linux terminal services currently does not support USB
• LTS 2.0 Linux support for SUSE 10.2, Fedora 6 and Ubuntu 7.04 for the L130/L230 only
• Additional software licenses may be required by the software licensors. Please check your software user license agreements to ensure your
continued compliance with such agreements.

NControl Enables Remote Control and Administration

 Control Mode
 Remotely monitor and control the
keyboard, mouse and screen of
any student to collaborate
 Block a student from access to
ensure attention (screen is blanked
and keyboard/mouse are disabled)
 Remote logoff, restart, or shutdown
 Remote updates and installation of software
 Students can be in multiple locations/tele-learning

 Presentation Mode
 Broadcast the teacher’s screen activities to one or
more students
 Broadcast one student’s screen to a group of
students

 FTP Mode
 Distribute to and collect files from student computers

Setting X Series
Step 1: Install PCI card Step 2: Connect access terminal to
into the Host PC the employee’s monitor and
peripherals

Step 4: Install
NComputing software
on Host PC directly or
via imaging software
(like Ghost) Step 3: Connect access
terminal to the PCI card via
standard cable

Device Manager X300 0n Windows

NCX-Console

Show session log on this host

NCX-Console
Click

Insert message

NCX-Console

Click

Click “Yes” want stop session
Click ”No” want cancel stop session

NCX-Console

Insert delay time when
shutdown (seconds)

NCX-Console

Select allow or not every
session can shutdown

NCX-Console

Select resolution on x300 box

L Series Installs in Just 3 Easy Steps
Step 1: Connect L Series Step 3: Install
access terminal to the NComputing software
employee on Host PC directly or
monitor/mouse/keyboard via imaging software
(like Ghost)

Step 2: Connect terminal
to the network

Recommended Host Configuration

Setting L-Series Box

select whether to use a dynamic IP
address or a static IP address.

Autodetection : No specified server
network address.
TS 2,TS 3:field where you set a host PC
IP address.

User name : insert user for Windows log in
Programs :You can make the desktop come
up, or a program that is specified
Desktop size: You can set the resolution, color
depth, and frequency.


"Password" : protecting the access terminal options with a password.

Using the management console

Show user log on

Select for view screen or control client
Click right
bottom on
mouse


Click


Version of NCT-2000-XP


Insert delay time when
shutdown (seconds)


Clear session auto when
disconnect (minutes)


Select client

Disable for select master or
client use USB on Host-PC


Setting
Hardware
Click for setting client

Select client


Edit MAC Address


Insert data of user
Enable for auto logon

Master Console
Main window
containing all other
windows

List of help
Observed PCs/ Workplaces messages and finally

List of not observed just
Ncontrol Groups
active PCs/Workplace

NControl : Create Group

Insert group name

NControl : Add Client to Group

Select group

Add client to
group

NControl : Show client in Group

Tech n computing

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (13)

Destaque

Destaque (12)

Semelhante a Tech n computing

Semelhante a Tech n computing (20)

Último

Último (20)

Tech n computing