Holding Cars inside ISO containers was never easier. Car lashing systems. Ferreterro Manufactures All types of Car lashing system for Cars ranging from NANO to Hummer, Trucks Ranging from TATA to VOLVO Trailers!!

1. SHIPPING CONTAINERS(NON PERFORATED FLOOR)
• Problem arises in Containers
where lashing points are
available but not on floor
• In those carriers the Spring
Mounted Mass (Vehicle) has to
be tied down by chasis or
lashing points
• The lashing points on Vehicle
should be adequate else wheel
lashing sideways is
recommended.

3. Best Solution been accepted by Bentley, Porche, Ferrari,
Mercedes, Volkswagon, Lamborghini

4. Why only Ferreterro
We Manufacture Car Lashing systems, Wheel Lashing Systems and Vehicle
restraint systems as per EN 12195-2 Standards. We are an ISO 9001:2000
company and have every process of production in house. Our products have
following advantages:
1. Cost Effective.
2. Less than 7% elongation of webbing on LC i.e. 2 tons
3. Our lashing system is made as per 4 ton capacity and we
guarantee 4 tons plus at every point of same.
4. Our stitching is also of HTPY and thread made also makes pattern
to stand more than 4 tons.
5. All products are labeled and Batch coded.
6. End fittings are Electroplated zinc 10-15 microns and stand salt
spray test of 150 hours.
7. We use Trivalent passivation which is environment friendly
unlike hazardous hexavalent passivation.
8. Our webbing is Pre Stretched so that loosening while transit is
minimal.
9. We can Design, Develop and Manufacture systems on short notices
as every process is in house.
10. We have In house Laboratory and testing facilities for every
process of every part used in lashing system.