New holland lm732 telehandler service repair manual
1601 RAVEENDRAN.PDF
1. RAVEENDRAN
Pressure Control Operations
Incorporating:
WPCE: Braided Line
WPCE: SlickLine
24/08/2016
KUWAIT
Date: .................................................................
Venue: ...............................................................................................
Verifier: ...............................................................................................
Course Number:
1601
Certificate S/N:
14030
21/08/2016 to
.....................................................................................................................................................
Has successfully completed a training course on
10K Pressure Control Equipment
THIS IS TO CERTIFY
Signed: ..........................................................
Instructor / Assessor:-
Halliburton(If required) On behalf of
NOV Elmar Equipment
Colin Mackay
PASSResult Status =
2. For further information please contact.
Service & After Sales (S.A.S)
NOV ELMAR - UK
Enterprise Drive,
Westhill Industrial Estate,
Westhill,
Aberdeenshire,
AB32 6TQ, Scotland, UK
Tel : +44 1224 740261
Fax: +44 1224 743138
Notes on Certification:-
.All training courses will utilise or be based on NOV Elmar equipment and procedures
unless otherwise stated on the certificate.
Where a certificate number begins with an "F", this generally denotes that the candidate achieved a test
mark (Where applicable) below the required 80% or the training given is not considered to be a "Full" course.
In this case an "attendance" certificate may be issued.
The exact mark that the attendee achieved may be shown below.
Where a training course does not include a test, a pass result of 100% may be given and any attendee who
does not successfully complete the course to the instructors satisfaction may receive a result of 50% or below
and therefore may be issued with an attendance certificate or in some cases no certificate.
In Some cases an informal training session may be accompanied by a certificate of attendance. In these cases
the test result shown will be 0%.
Where "Maintenance" training is given, this will be specific to the NOV Elmar equipment indicated
and be based on NOV Elmar maintenance and QA procedures unless otherwise stated on the certificate.
Where applicable, training carried out by NOV Elmar will be accompanied by a training report which will
be issued to the client on completion. This report will detail any relevant points or concerns for that
particular course or individual attendees.
83%Attendees Test Result:- Trainers Comment :-