Engine owners know that it is important to add quality fuel filtration to guard against dreaded engine low power or shutdown due to water and contaminants in their fuel. To the rescue is Racor’s new all-plastic SNAPPTM fuel filter/water separator that packs high-performance features into a rugged, corrosion-proof package. One look and you’ll see it’s different from just about everything else out there. We found that if quick and easy servicing is the goal, then this filter might be the answer. The SNAPPTM has a one piece body and clear bowl that allows for visual inspection just like other spin-on units. But this one doesn’t have seals to swell or threads to bind—making on-the-go filter change outs quick, clean, and painless. Just snap the unit into its stainless steel bracket and snap on the quick disconnect fittings and you’re done! Looking at the specifications we noted that the SNAPPTM uses genuine Racor Aquabloc® media so it’s going to perform like you expect a Racor filter to perform. The drain and bowl themselves are familiar Racor designs so draining any contaminants or water will be just as easy. First time installation of the SNAPPTM is almost as easy as regular servicing. The universal stainless steel bracket has mounting holes that fit many popular existing mounting locations on your boat. So the next time you need an upgrade or a new installation, give the SNAPPTM a look! Specifications: Flow rate: up to 26 gph (100 lph) Connections: ¾” quick connects Micron rating: 2, 10 or 30 micron Parker Hannifin Corporation Racor Division P.O. Box 3208 3400 Finch Road Modesto, CA 95353 phone 800 344 3286 209 521 7860 fax 209 529 3278 racor@parker.com www.parker.com/racor