2. GeosoftVN LogMan 8.0 User’s Guide
INTRODUCTION TO LOGMAN
LogMan 8.0 (LM8) can be used to quickly create, edit and print geotechnical
borehole logs and cross.
This software assist the geotechnical investigation in field of geology, engineering
geology, geo-environmental engineering, transportation, mining construction. Since
the drawings is exported to AutoCAD, the data table is exported(copy) to Microsoft
Excell, it can be easily edited to have perfect result. Drawing of borehole, profile
create by Autocad the great CAD program.
LM8 is a smart(join soil layers), quick, easy to use program.
All the data of borehole, cross and other data are stored in only one data file. The
number of investigation borehole can be up to thousands (for commercial version),
number of Cross in one project, topographical points in one cross, layers, samples,
tests are not limited and only depend on your computer system resource.
The high drawing speed helps user to have cross and logs printed right away without
any edition.
The geotechnical cross is drawn by smart algorithm, soil layer are automatically
jointed by software. This is only in Logman 5.0 and later version.
LOGman has useful interface, user can easy to Copy, Paste data from other program
(ex. Microsoft Word, Excel, Notepad) and many format. Even though when the data
are in type of drawing (cross section, cross and contour map) the user can easily
extract the elevation and distance by utility of topographical data from AutoCad
pline. Besides the location of borehole can be put in map quickly and correctly.
LOGman have more library of soil and rock pattern.
What new in LOGman version 8.0?
+ Draw graph SPT or RQD in a cross drawing.
+ Lithology description: Name, color, hardness... Quick select with combo box.
2
3. GeosoftVN LogMan 8.0 User’s Guide
GETTING STARTED
Before you begin working with the LM8 program;
Check the contents of your distribution package;
Make sure you have the necessary equipment;
Run the installation program;
Then Start the LM8 program
Installing LogMan
The installation of the LogMan program will depend upon the type of operating
system. Before installing the program make sure you have received the entire
distribution package and that you have the required equipment.
Required Equipment
LogMan requires the following hardware and software to run efficiently:
· Windows 32 bit 95/98/2000/XP or NT (not include WinME)
· At least 32 MB of RAM;
· At least 32 MB of hard disk space;
· A screen resolution of at least 600 x 800; ( best at 1280x1024)
· A CD-ROM drive.
Installation –See from LogMan
To get LogMan up and running, run the installation program SETUP.EXE
on the CD-ROM. For example, to install from drive D:
1. Start Windows
2. Insert the CD-ROM into drive D;
3. Choose File | Run and type D:SETUP.EXE, or double-click on
D:SETUP.EXE in Windows Explorer, or double-click on the
3
4. GeosoftVN LogMan 8.0 User’s Guide
Add/Remove Programs icon in the Control Panel and follow the
instructions;
4. Input the requested information in the installation forms, discussed in the
next section.
On some computer systems, depending on how they are configured, inserting the CD-
ROM into the drive will automatically start the SETUP.EXE program.
The SETUP program does the following:
· Creates one or more directories on your hard disk and copies the contents of
the LogMan disk into them;
· Creates a Windows application group and installs the LogMan, LogMan help,
and Read me icons.
Requested Information
The installation forms will request the following information in order to store the
LogMan program in the proper place and register it in Windows:
· The directory to put the LogMan program.
· The name of the application group to place the LogMan program icons.
Uninstalling LogMan
The LogMan program files can be removed from your hard disk using the
Add/Remove programs option in the Windows Control Panel. Un-installing the
LogMan program will also remove the LogMan icons, and application group.
Registering and Unlocking LogMan
Before LogMan can be used it must be registered. Prior to registration process the
program will run in Demo mode (You can save data file but random number e.g Deep
3.45m may be save for 3.56. All text content “Demo” in drawing). Some message
box will alert when you update data.
4
5. GeosoftVN LogMan 8.0 User’s Guide
During the registration the program will be unlocked.
When buy a registration version user contact us, purchase and download a program
for your computer.
Note: A computer is hardware include: CPU, main board, hard disk. User can be
updated or changed main board, hard disk. With LogMan one License are one CPU.
Some demands for user: Create samples of borehole log as: Create samples of
borehole log and cross, maintain and upgrade them every months,
We always have helpful policies, survey for organizers of, educating and training.
Step by Registered
STEP 1: Registered member at GeoSoftVN's Website at www.geosoftvn.com. This
Step useful for GeoSoftVN manager user, support, update information and must
requires if user Purchase by PayPal. Skip this step if user are already GeoSoftVN’s
member.
STEP 2: Get your system information by LOGMAN. In this step user must install
LOGMAN after run LOGMAN chose menu Help > Registered. Fill user name/
company, E mail then click "Generate Order" to create order information. Mail us
"Order" with your require about Template of borehole log, cross.
Note: User have to run the demo version in the computer which the registered version
to be installed. The computer must have no temporary hardware since the information
from your computer is legal base for commercial contract of software to be installed
in this computer.
See this step in next pages:
5
7. GeosoftVN LogMan 8.0 User’s Guide
STEP 3: We will process this order and make a LogMan registered version for your
computer.
STEP 4: Purchase when Email requires
STEP 5: Download Logman then Re Install
7
8. GeosoftVN LogMan 8.0 User’s Guide
MAIN INTERFACE
Screen Areas
When you first start the program the main window below will be displayed. The
LogMan window will look like below. This window consists of a title bar, menu bar,
optional toolbars, desktop, and a status bar. In addition, popup menus can be
displayed by clicking the right mouse button
Title Bar
The title bar is located at the very top of the window and displays the program name,
the currently opened project, and the currently opened borehole log.
8
9. GeosoftVN LogMan 8.0 User’s Guide
Tool Bar
The tool bar is located below the menu bar and contains the main level of commands
in the program.
Menu Bar
The menu bar is located below the title bar and contains the main level of commands
in the program. It uses standard Windows pull-down menus. You can choose any
menu item on any submenu that is not dimmed (You can custom LogMan menu and
toolbar and save all changed).
When the program is first started new data sheet will appear.
Panel
Some panel for input data, You can drag, expand,
collapse it.
9
10. GeosoftVN LogMan 8.0 User’s Guide
Data table
All most Logman data store in Table. That very quick with copy, cut, paste.
1. Lithology windows
Lithology window is used to Input general information of strata.
10
11. GeosoftVN LogMan 8.0 User’s Guide
When Lithology window active then can edit or in put some thing in “Project
information panel” : PROJECT, LOCATION, LOGER and INSPECTOR. These
information will be DEFAULTED when it is added one BOREHOLE LOG or new
CROSS. Besides, LOGMAN helps adjusting these information to each BOREHOLE
or specific cross.
Table LITHOLOGY
To input the general information about LITHOLOGIES in surveyed area,
including:
+ LAYER name.
+ LITHOLOGY DESCRIPTION
+ WEATHERING
+ HARDNESS of rock
+ Soil or rock grade
+ Symbol 1-4: Patterns of soil and rock will showed on the DRAWING, it’s
allowable to have some patterns in one layer.
E.g : Organic soil, highly weathered Granite. These PATTERNS are used by Autocad
and can be written as order from customer.
+ Fracture of rock (Discontinue density).
11
12. GeosoftVN LogMan 8.0 User’s Guide
+ Discontinue description
The above information can be automatically selected directly by DEFAULT OPTION
in the program or can be selected from many available patterns.
2. Boreholes list windows
List all boreholes in project include borehole’s header.
E.g : Project name, Borehole name, X coordinate, Y coordinate, Depth of borehole…
In order input data you may use this windows after have information of lithology and
before make a cross which include some borehole.
Table BOREHOLES LIST
General information about borehole, including :
+ BOREHOLE NAME: It is required to have a new hole.
The boreholes without name or being deleted will not inputted into database.
12
13. GeosoftVN LogMan 8.0 User’s Guide
To delete borehole data, see the ROW DELETE. to copy borehohe data, see COPY
BOREHOHE DATA.
+ ELEVATION
+ X COORDINATE (or NORTH)
+ Y COORDINATE (or EAST)
X and Y COORDINATE can be used to locate the borehole position onto the plan
map.
notice: Any item which is kept blank or error will be defaulted as zero.
+ WATER LEVEL: The stable ground water level in the borehole if any.
+ DEPTH: The depth of borehole will be automatically updated during entering the
data of layers. It’s not required to input or adjust this item.
+ SCALE: Scale of borehole logging.
+ STARTED DATE and FINISHED DATE.
3. Windows to input detail data of borehole and cross.
In a order, After inputting general information of boreholes, we choose different
specific windows to input data of each borehole or cross.
- Borehole details windows
Used to input and adjust the information of each hole, including 3 tables and one
panel:
13
14. GeosoftVN LogMan 8.0 User’s Guide
When this window active user can edit borehole header
from “borehole header” panel. Project, State, Section…
was default by project data, but you can change it.
Remember it may difference with each other.
14
15. GeosoftVN LogMan 8.0 User’s Guide
- Cross details windows
Used to input and manage the data of cross
There are 2 types crosses : CROSS and FENCE (little cross) with the same data.
When this window active user can configs cross from
“Cross configs” panel. Hor. scale, Ver. scale, Draw scale
bar…
15
16. GeosoftVN LogMan 8.0 User’s Guide
- Options windows
Used to configs the way and value to input data, custom interface.
16
17. GeosoftVN LogMan 8.0 User’s Guide
All change will available after chose “Apply”
Menu FILE
The menu displays a list of commands for controlling file
Menu EDIT
The menu displays a list of command to manipulate the
data in table, e.g: cut, copy, paste, insert row, delete
row.
Menu View:
Used to Show or hide some panel, windows.
17
18. GeosoftVN LogMan 8.0 User’s Guide
Menu Tools:
Used to choose various configuration for the program
+ Enter DIRECTION :choose direction to move the cursor after inputting the data in
one cell.
+ SPLIT BOREHOLE LOGS: permit user to split the borehole log into many pages
in case the size of drawing is too large.
+ Hatch the layer material for cross section: The program will automatically fill
layers with pattern(s) when drawing the cross.
+ Little cross (fence) only Hatch the layer nearly Borehole. e.g 5m, 10m.
+ Options: Configs the way to input data and user interface.
Menu Draw
+ START AUTOCAD: Run Autocad to make Boreholes or cross if it has not been
started. LogMan can be run Autocad itself.
18
19. GeosoftVN LogMan 8.0 User’s Guide
+ DRAW BOREHOLE LOG: You must be chose a template, Windows Boreholes
list must be active.
TEMPLATE A3, A4: often used in hydraulic or water resource project.
TEMPLATE 3,4 (with SPT GRAPH and without SPT GRAPH): often used in civil
engineering project
+ DRAW CROSS: All cross available in lists will be create, if Windows cross are
active then only select cross will be create.
+ LITHOLOGY HATCH: hatch the material of strata with pattern(s) by layer or
point selection.
+ LEGEND: helps to create a table of legends for lithology used in Acad drawing.
+ INSERT SYMBOL OF BOREHOLE: Locates the borehole position onto map
together with notation, elevation and depth.
+ LIST OF SAMPLES: List all sample in project into Excel file.
Menu HELP
+ Content: Lists the subjects assisted in Help
+ Author: The information of authors copyright.
+ Registered: input information to register the program
19
20. GeosoftVN LogMan 8.0 User’s Guide
ORDER TO INPUT DATA AND CREATE THE DRAWING
The program is used by the following sequence:
· Set configs (for first times only)
· Project information panel
· Lithology windows
· Boreholes list windows
· Borehole details windows
· Cross windows
· Set configs of drawing
· Create drawing
1. Set configs
For first times to use LogMan 8.0, all configs are default. Set new value if you want,
chose menu: Tools > Options. All changed will available at that time.
20
21. GeosoftVN LogMan 8.0 User’s Guide
2. Project information panel
When begin a new project, had better if user fill complete project information. All
data will be default for each other borehole or cross.
3. Lithology windows
In next step for project user input information describing the general lithology
(strata). All data will be default for each other borehole. All boreholes use general
lithology description will be update by edit change in this windows.
21
22. GeosoftVN LogMan 8.0 User’s Guide
4. Boreholes list windows
After complete lithology information, user input Boreholes’s header in next step.
There are three ways to Input information for each borehole. Complete all boreholes
first; move step 5 to input detail of the boreholes or copy borehole data the fix new
data.
To copy or paste borehole data: Right click on the data row then chose “Copy
borehole data”
22
23. GeosoftVN LogMan 8.0 User’s Guide
5. Boreholes detail windows
Input information for each borehole, choose the “borehole data detail” from tool
bar or menu View (short cut key is F4) when “borehole windows” active.
Chose layer name from Drop down, all soil layer are in project lithology. To add or
remove some data, click expand table and user edit change.
To update the change, user chose “Update” from toolbar or close this windows.
LogMan will ask you want to Update the changed data.
Repeat steps 5 with other boreholes.
Note:
+ Update data not mean “Save data”
+ Logman can Arrange all windows, then quick and easy to input data.
+ The description of each borehole log can be different from general lithology.
Notices:
23
24. GeosoftVN LogMan 8.0 User’s Guide
+ The data area must be kept continued and there is no blank (if any blank exists the
following rows will be neglected)
+ The data will only be updated when the name of layer and sample is entered.
When we enter the data of boreholes, besides general information about
Project, item,... name of layers, and description, etc, some other information can be
added for each single borehole.
Table 1: Lithology layer : Input data of lithology layer available in the borehole.
+Name of layer: Input the name of declared layer in general geological strata.
+ Bottom of layer: Input the depth of the bottom.
+ Lithology description : Software will both default value and adjust description.
24
25. GeosoftVN LogMan 8.0 User’s Guide
+ Grade of weathering.
+ Hardness of rock.
+ Soil and rock grade
+ Symbol 1-4: If Hatch samples are not valid (Not belong to Autocad ),they will
not be drawn)
+ Discontinuity (Fracture of rock) density
+ Discontinuity description.
LOGman uses maximum available choices while inputting data, therefore it helps to
increase the speed and avoid making mistakes.
Notice: Borehole log descriptions different from general declaration.
If you can put more data to each borehole log if you want. If you want to limit data
from the general notices, click SPACE (keyboard) instead of omitting them which
helps the program knows that there is no notice here (in order to avoid the case
general notices are changed or there is no general notice but you have inputted
boreholes data) In that case, the detail data of borehole log have to be changed.
Table 2: Samples data
Input samples data, including:
+Name of samples
+Depth from…
+Depth to: Depth to is automatically added 0.2 m( It can be define by another ways)
Table 3: Text depth data (include SPT data)
To Input another information, principles of the depth from…to are required, There
can be one or a lot of information in it.
+ From, To: Depth from ….to…
+ N1, N2, N3: Blows in SPT standard.
25
26. GeosoftVN LogMan 8.0 User’s Guide
+ Core recovery.
+ RQD:(Rock Quality Designation)
+ Time for drilling : started and finished time drilling is split by “–“
+ Date for drilling, depth : Date for drilling and depth are split by the “-“
+ Water loss
+ Drilling Method
6. Cross windows
Input data for each cross. If only draw boreholes log, go to step 7. Chose “Cross data
detail” from toolbar ; from Menu View or key F5.
+ Choose the cross not in the list to create a new data, or the cross in list to modify.
+ Input or modify the name of the cross
26
27. GeosoftVN LogMan 8.0 User’s Guide
When cross windows active, panel “Cross configs” available. User can set configs for
each cross there.
+ Options for drawing (vertical and horizontal scale)
+ Distance every from station and elevation.
+ Parameter cross : Name of cross, horizontal and vertical
scale, scale bar on the left, scale bar on the right, drawing
samples, Drawing title block...
Cross data table: Input and adjust chosen cross data.
+ Distance: It is odd distance among surveyed boreholes,
station of terrain.
+ Elevation : is Elevation of drilling or station.
+ Borehole: Name of boreholes in cross.
+ Station: terrain station is not necessary to contain.
+ Remark: Notices in terrain (Sewer, storage, km…)
Note: User can input data of terrain by the following ways:
- If file formed TEXT, open in Excel, Notepad... then Copy and paste data in cross.
- If there are horizontal and vertical drawing files of terrain, user can use by putting
data of the terrain.
Notices:
It’s not acceptable to have any blank row, the rows below the blank row will not be
updated.
27
28. GeosoftVN LogMan 8.0 User’s Guide
7. Set configs of drawing
Before establishing a drawing on Autocad, it is necessary to put configuration for the
program, Those are choices:
+ Split borehole: Choose menu Tools > Split borehole
28
29. GeosoftVN LogMan 8.0 User’s Guide
+ Hatch Immediate: Chose it if Cross data is simple (and all soil layer join more
exactly)
+ Little Cross: A column of Lithology draw nearly Borehole.
Note: LogMan can not join layer with 100% exactly, the cross drawing must be check
and fix mistake manual by geo-engineering.
After fix mistake Soil layer, user can quick hatch by name or select point from
drawing. Chose them from toolbar or menu Draw > Hatch pattern.
8. Create drawing
Choose the borehole log drawing or cross drawing command
from toolbar or menu.
Choose a start point to draw on Acad drawing and wait during
running process then you will have drawing.
29
30. GeosoftVN LogMan 8.0 User’s Guide
GENERAL PRINCIPLE TO INPUT DATA
The data of the program is very important, If you want the program to run correctly,
user has to obey some following principles while inputting data in the table.
+ Input the data and its value correctly. E.g: It is impossible to input the depth of
borehole by the signs such as “abc”, scale as” "def"....
+ Input enough data for creating a drawing. E.g: The cross must be Horizontal and
Vertical .SCALE, the Lithology need have layers…
Notices:
It’s not acceptable to have any blank row, the rows below the blank row will not be
updated.
In the drawing which is input incorrectly, the data below the blank will not be
updated.
+To copy borehole data to a new one, all data rows must be copied.(choose rows
from its order).
30
33. GeosoftVN LogMan 8.0 User’s Guide
Sample list
33
34. GeosoftVN LogMan 8.0 User’s Guide
SHORT CUT KEYS LISTS FROM LOGMAN
Shortcut key Function
F1 Help
Alt + F Open Menu file
Ctrl+N Create a new file
Ctrl+O Open an available file
Ctrl+S Save file
Alt + E Open editing Menu
Ctrl+Z Undo Edit, Cut, Copy or Paste
Ctrl+Y Redo Edit, Cut, Copy or Paste
Ctrl+X Cut data
Ctrl+C Copy data
Ctrl+V Paste data
Ctrl+F Find or Replace
Ctrl+I Insert rows
Ctrl+D Cut rows
Alt + V Open View Menu
F4 Detail window of borehole
F5 Detail window of cross
Ctrl+1 Show/hide project panel
Ctrl+F3 Show/hide Lithology windows
F3 Show/hide Borehole list windows
Ctrl+2 Show/hide Borehole header panel
Ctrl+3 Show/hide Cross configs panel
Alt + T Open Menu Tools
Alt + D Open Menu Draw
Alt + W Open Menu Window
Alt + H Open Menu Help
34
35. GeosoftVN LogMan 8.0 User’s Guide
FREQUENTLY ASKED QUESTIONS.
1. What is LOGman used to?
LOGman program is used to manage data for engineering geology cross of each
project, set up results quickly for those surveys in the from of drawing which assists
the geotechnical investigation in field of geology, engineering geology, geo-
environmental engineering, transportation, mining construction…
2. Borehole log.
Now, LOGman 8.0 does not assist a lot of borehole log samples but depends on
customer.
3/ Required system
Win 32 bit ( From Win 95 and later)
Install Acad 2000 and later version.
User should use Logman with speed 400 MHz 64 MB RAM and ( not compulsory)
4/ What should I do to increase the drawing speed.
You should start Acad2000 up before running LOGman (However, it is only your
feeling)
LOGman wastes less time if it is drawn on a new DWG file. User should not run on
current file with large size ones.
5/Which orders I need to obey?
Input strata data
Input data of borehole logs.
Establish a name of cross, Input data of terrain, put borehole into cross, update the
data of that cross. Establish parameters of the cross. Therefore, draw the cross.
35
36. GeosoftVN LogMan 8.0 User’s Guide
6/ I do not like blocks in the drawing?
The reason is that you are not used to use block, the benefit from block is huge, e.g: it
is very simple to rub out the whole of elevation and depth of bottom layer or incase
you want all the names of boreholes, elevation, depth, co-ordinate of hand boreholes
or enlarger 1,2 on drawing …if you use block and there are a lot of other usefulness
from block.
7/ I needn’t use Block?
If you use Explode blocks, result only is tag, the value of attribute will have been
disappeared. You must use the key Explode attributes to Text on Autocad menu
‘Express >Blocks > Explode attributes to Text’. It is OK..
8/ I want to input data more than existing rows ?
Click right mouse, choose ‘Insert Row’ which is also used to insert sample, other
experiment.
9/ How to share data between each other project?
Logman 8 is MDI software, but can not work with more project at time, because that
simple to manager data for user. The way share data is: Run two or more LogMan at
one time then Copy from and Paste each other.
36
37. GeosoftVN LogMan 8.0 User’s Guide
TERMS OF USE
GRANT, RESTRICTIONS, AND OWNERSHIP
GEOINFORMATICS SOFTWARE SOLUTION and TECHNOLOGY SERVICES.,
JSC. and its suppliers, as applicable ("GeoSoftVN"), hereby grant you the right to use
the content comprising the this document and GeoSoftVN's website (the "Content").
You may print the Content on GeoSoftVN's website intact from within your browser
for personal and fair use purposes only. The Content has been compiled by
GeoSoftVN from a variety of sources, and is subject to change without notice.
SOFTWARE
Specifically, but without limitation, any computer software downloadable or
otherwise available through GeoSoftVN's website is licensed subject to the terms and
conditions of its own applicable license agreement, and specific terms and conditions
applicable to Software in download licenses within GeoSoftVN's website or
otherwise available through GeoSoftVN's website will supersede the provisions of
these Terms Of Use.
The use of certain areas of GeoSoftVN's website is further restricted to GeoSoftVN's
support customers. You may not copy, adapt, modify, display, perform, or otherwise
use the Content (including use the Content on any other web site or networked
computer environment) for any other purpose or in any other manner without the
prior express written permission of GeoSoftVN's or its suppliers, including without
limitation such permission as may appear within GeoSoftVN's website.
You agree that the Content is the proprietary information of GeoSoftVN and/or its
suppliers, and that you will conform your access, copying, and use of particular
Content to the applicable GeoSoftVN's website purposes indicated in association with
the particular Content.
LINKS WITH OTHER SITES
GeoSoftVN's is not responsible for the content of any other web site linked to or from
GeoSoftVN's website. If you link to another site, you may leave GeoSoftVN's. If you
decide to link to another site, you do so entirely at your own risk. GeoSoftVN may
provide links from the website to other sites, but this is done solely as a convenience
to you and in no way should be interpreted as a referral or endorsement of any
content, sponsor or owner of any other site. ALL WARRANTIES, CONDITIONS
OR OTHER TERMS EXPRESS OR IMPLIED AS TO ANY SUCH LINKED SITE,
INCLUDING WITHOUT LIMITATION AS TO ACCURACY, OWNERSHIP,
37
38. GeosoftVN LogMan 8.0 User’s Guide
VALIDITY OR LEGALITY OF ANY CONTENT OF A LINKED SITE, ARE
HEREBY EXCLUDED.
DISCLAIMER
THE CONTENT PROVIDED AT THIS WEBSITE IS PROVIDED "AS IS" AND
ANY WARRANTY, CONDITION OR OTHER TERM OF ANY KIND
INCLUDING WITHOUT LIMITATION ANY WARRANTY OR CONDITION OF
MERCHANTABILITY, SATISFACTORY QUALITY, SECURITY, FITNESS FOR
A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT OF
INTELLECTUAL PROPERTY IS HEREBY EXCLUDED. Applicable law may not
allow the exclusion of implied warranties, so the above exclusion may not apply to
You. GeoSoftVN does not warrant the accuracy and completeness of the Content on
the website. GeoSoftVN takes no responsibility for viruses or other destructive or
intrusive computer programs that may damage your computer system or data
resulting from your access to or use of the website.
LIMITATION OF LIABILITIES
IN NO EVENT WILL GEOSOFTVN OR ITS SUPPLIERS BE LIABLE FOR ANY
DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, THOSE
RESULTING FROM LOST PROFITS, LOST DATA OR BUSINESS
INTERRUPTION) ARISING IN RELATION TO THESE TERMS OF USE
AND/OR THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF
GEOSOFTVN's WEBSITE, THIS WEBSITE, ANY WEB SITES LINKED TO
THIS WEBSITE, OR THE CONTENT CONTAINED AT ANY OR ALL SUCH
SITES, WHETHER BASED ON WARRANTY, CONTRACT, TORT OR ANY
OTHER LEGAL THEORY AND WHETHER OR NOT GEOSOFTVN IS
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IF ANY OF THE
FOREGOING RESULTS IN THE NEED FOR SERVICING, REPAIR OR
CORRECTION OF HARDWARE, SOFTWARE AND/OR DATA, YOU ASSUME
ALL COSTS RELATED DIRECTLY AND/OR INDIRECTLY THERETO.
APPLICABLE LAW MAY NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. However, in
accordance with the paragraph of these Terms Of Use entitled SOFTWARE, specific
terms and conditions applicable to Software downloadable or otherwise available
through GeoSOftVN's website will supersede the provisions of this paragraph.
CHANGE "TEAM OF USE" IN FUTURE
The Content "TEAM OF USE" has been compiled by GeoSoftVN from a variety of
sources, and is subject to change without notice.
38
40. GeosoftVN LogMan 8.0 User’s Guide
OTHER SERVICE OF GEOSOFTVN:
- If Any geological strata, borehole log, other cross samples are ordered, we will be
very pleased to give you.
- Other programs in geotechnical field.
GRAIN 4.3: Soil samples calculator ( mathematics statistics, standard, values
according to 2 limited states)
- Programs for AutoCad:
+ ACADplot : Manage printing simply and fast….
+ Create Hatch pattern for AutoCAD
+ Manage block
- Web design:
+ Joomla template : GeoSoftVN design Web template for Joomla’s CMS. Fore
more information about Joomla visit www.joomla.com.
Thank you for caring about our program.
See you again in new version!
*
* *
40